AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual

AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual A6 1995 C5 / 2.G AUDI AUDI https://www.carmanualsonline.info/img/6/1308/w960_1308-0.png AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual
Trending: ECU, light

Page 1 of 10

AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual 39-6
 
     
Seal and grooved ball bearing 
for flange for driveshaft on 
transmission, replacing 
     
Special tools, testers and auxiliary items 
required:   
     
Drip tray V.A.G 1306
     Adapte

Page 2 of 10

AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual      
Multi-purpose tool 771/1 with attachment 
771/15 and stud M8/M10 
     Punch 2005 
     Shim, Part No. 016 311 391 B
Pa
ge 2 of 10 Seal and 
grooved ball bearin
g for flan
ge for driveshaft on t

Page 3 of 10

AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual 39-7
 
  
1 - 
Transmission 
2 - 
Grooved ball bearing 
3 - 
Bearing housing on balance weight 
4 - 
Seal 
Driving in   Page 39
-13
5 - 
Drive flange 
6 - 
Bolt, 25 Nm 
Qty. 6
Pa
ge 3 of 10 Seal and

Page 4 of 10

AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual 39-8
 
  
7 - 
O-ring 
Always replace
8 - 
Circlip 
9 - 
Spring plate Mark installation position when removing: 
larger diameter (concave side) toward 
shims - 10 
10 - 
Shims 
11 - 
Spring 
12 - 
Oil

Page 5 of 10

AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual 39-9
      
Removing  
     
Transmission installed 
     
-  Disconnect driveshaft at the front   Page 39
-
68
 , lift clear and tie-up on selector linkage. 
     
-  Place a drip tray underneath.

Page 6 of 10

AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual 39-10
      
-  Take circlip off drive flange.
    
-  Press out drive flange.
    
-  Pull out seal for drive flange.
-  Thoroughly clean seal seat.
Pa
ge 6 of 10 Seal and 
grooved ball bearin
g for

Page 7 of 10

AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual 39-11
 
    
-  Press out grooved ball bearing.
Pa
ge 7 of 10 Seal and 
grooved ball bearin
g for flan
ge for driveshaft on transmission, re
placin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis

Page 8 of 10

AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual 39-12
      
Installing  
    
-  Press grooved ball bearing in bearing housing.
Pa
ge 8 of 10 Seal and 
grooved ball bearin
g for flan
ge for driveshaft on transmission, re
placin
g
11/19/2002 htt
p:

Page 9 of 10

AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual 39-13
 
    
-  Lightly oil outer circumference of seal -B-.
-  Fill space between sealing lips and dust lips with sealing grease G52 
128 A1. 
-  Fit seal with shim -A-, Part No. 016 311 391 B (1.7 m

Page 10 of 10

AUDI A6 1995 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual 39-14
 
    
-  Press in drive flange. 
-  Fit circlip onto drive flange.
-  Lightly oil O-ring and fit into bearing housing groove. 
-  Insert spring plate and shims into bearing housing. 
   Install
Trending: light, ECU