AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual

AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual A6 1996 C5 / 2.G AUDI AUDI https://www.carmanualsonline.info/img/6/1316/w960_1316-0.png AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual

Page 1 of 21

AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual 34-18
 
     
Transmission, removing and 
installing 
     
Removing  
     
Special tools, testers and auxiliary items 
required:   
    
Engine-/Transmission lifter V.A.G 1383 A
    
Transmission su

Page 2 of 21

AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual 34-19
 
    
3282/12 Adjustment plate VAG1306 Drip tray
Pa
ge 2 of 21 Transmission, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI

Page 3 of 21

AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual 34-20
      
-  Obtain radio code on vehicles with coded 
radio. 
     
-  With ignition switched off disconnect battery 
Ground strap. 
    
-  Loosen bolts (arrows) and remove engine cover panels (a

Page 4 of 21

AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual 34-21
      
-  Remove coolant system expansion reservoir 
and lay to one side. 
    
-  Unplug connector for oxygen sensor on left (arrow -2-) and move wire 
for oxygen sensor clear. 
    
-  Unplug

Page 5 of 21

AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual 34-22
 
    
-  Unscrew two bolts securing heat shield -2- on exhaust pipe (right and 
left). 
-  Unscrew nuts -3- on exhaust pipe (right and left).
-  Unscrew engine/transmission securing bolts acces

Page 6 of 21

AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual 34-23
 
    
-  Unbolt bracket for noise insulation (arrow).
    
Note:  
Take care not to damage protective coating on drive axles.   -  Unbolt heat shields from transmission above left and right dri

Page 7 of 21

AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual 34-24
      
-  Loosen exhaust system clamps and push 
clamps towards rear. 
    
-  Remove heat shield for driveshaft from cover for Torsen differential 
(arrows). 
    
-  Unbolt driveshaft -1- from

Page 8 of 21

AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual 34-25
 
    
-  Remove bolts (arrows) and remove transverse mount -A-.
-  Completely remove brackets -B- at right and left exhaust pipe. To do 
this, bolts -2- and -3- must be removed. 
    
-  Unscre

Page 9 of 21

AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual 34-26
 
    
-  Lower subframe at rear and place spacer (e.g. wedge of wood) in gap.
-a- = max. 50 mm
    
-  Unscrew bolts -1- and -2- and remove right and left transmission 
supports from transmissi

Page 10 of 21

AUDI A6 1996 C5 / 2.G 01E Transmission Remove And Install Workshop Manual 34-27
 
    
Note:  
Avoid excessive bending of the flexible pipe connection (decoupling 
element) on the front exhaust pipe. The angle between the catalytic 
converter and the front exhaust pipe must
Page:   1-10 11-20 21-30 next >