transmission AUDI A6 1997 C5 / 2.G 01V Transmission Read Measuring Value Block E18/2 Owner's Guide

01-253

Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
007
4 Torque
converter (TC)
slip speed While
driving
1) TC open 0......standstill
RPM
Repair Manual, 5 Spd.
Automatic Transmission 01V, Repair Group 37,
- Check ATF oil level
- See DTC table, DTC number
17105 / P0721 and 17125/P0741
page 01
-45



TC control
(last shift
process at
least 20
seconds ago) 20...120 RPM
Repair Manual, 5 Spd.
Automatic Transmission 01V, Repair Group 37,
- Determine which element is
faulty or not activated,
transmission with shift elements

TC closed 0...20 RPM
- Check plausibility between
engine RPM, transmission input
RPM and transmission RPM,
display group number 001
1) While driving, a second mechanic is required to read specifications.
Note:
Pa
ge 31 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

Test requirements for torque converter slip speeds next page
Pa
ge 32 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-254
Test requirements for torque converter slip speeds:

"TC closed": Shifting process must be complete (wait at least 1 sec.), the Torque Converter (TC) must be closed and the
accelerator pedal value must be constant.
"TC control": Indicated values are valid for the "regulating condition" of the throttle converter (control). Under inconvenient
conditions (e.g. accelerating on a hill), this condition is not reached until 20 seconds after the shifting process has been
completed. During this regulating phase, slip values of up to 350 RPM can be reached.
Excessive torque slip speeds can also indicate slipping clutches or non-activated shifting elements.
Pa
ge 33 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-255

Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
008
1
Kick down switch -F8- Kick-
down
operated
2)
Kick-down - Check kick-down
switch, perform
electrical test page
01
-273


not operated -

2 Throttle valve value or
value from accelerator
pedal position While
standing idle 0...1 % When accelerating from
idle to Wide Open
Throttle (WOT), %-value
increases steadily.


Wide Open
Throttle
(WOT)
99...100 % - See DTC table, DTC
18269 / P1861 page
01
-45

- See also display group
number 002, display
field 2

3 Signal for
deceleration/engine under
load While
driving
1) Deceleration
mode Deceleration For down-hill or delay
(engine braking)


Engine under
load
- Engine is under load
during normal driving
conditions.
Pa
ge 34 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

1) While driving, a second mechanic is required to read specifications. 2) Operate kick-down means that the accelerator pedal needs to be depressed to stop. Display must simultaneously indicate
"100%" in display field 2.
Pa
ge 35 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-256

Display group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
009
1 Engine torque
2) While driving
1)
Nm
- See DTC table, DTC 18265 /
P1857 page 01
-45


Continue

2 Engine RPM With engine
running approx. 0...8200
RPM - See DTC table, DTC 17968 /
P1560 page 01
-45

1) While driving, a second mechanic is required to read specifications. 2) While driving in one gear, the indicated shift torque remains constantly high, since no engine torque reduction is required.
Note for display field 1:
The signal for actual engine torque is transmitted by the Engine Control Module (ECM) to the Transmission Control Module
(TCM) via the CAN-bus wiring.
Pa
ge 36 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-257

Display
group
number Display
field Description
Test requirements
Spec. value
V.A.G1551
display Corrective actions
009
3 Throttle valve value or
value from accelerator
pedal position While
standing idle 0...1 % When accelerating from idle
to Wide Open Throttle (WOT),
%-value increases steadily.


Wide Open
Throttle
(WOT)
99...100 % - See DTC table, DTC
18269 / P1861 page 01
-
45

- See also display group
number 002, display field 2

4
2)
Transmission input
torque While
driving
1) Nm Should be like display field 1.
1) While driving, a second mechanic is required to read specifications. 2) This display field is not displayed until model year 2000 (May 1999)
Pa
ge 37 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-258

Display
group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
010
1 Torque increase in
torque converter While driving
1)
0...3.2
Calculated by the Transmission
Control Module (TCM) from the
torque converter slip speed

2 Engine speed
(RPM) With engine
running approx. 0...8200
RPM - See DTC table, DTC 17968 /
P1560 page 01
-45


3 Gear selected See display group number 1, display field 4

4
2)
Vehicle acceleration
(actual) While
driving
1) Min. -10 m/s2
1) While driving, a second mechanic is required to read specifications. 2) This display field is not displayed until model year 2000 (May 1999)
Pa
ge 38 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-259

Display group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
011 1 Selector lever
position See display group number 4, display field 2

2 Tiptronic Switch -
F189- Selector lever in tiptronic
gate M-shift
- Perform electrical test
page 01
-273


Selector lever not in
tiptronic gate -

3 Tiptronic Switch -
F189-
(up/down shift) Selector lever in tiptronic
gate, select gears
- Perform electrical test
page 01
-273


Shift up
1)
Up-shift

Shift down 2)
Down-shift
1) Operate up-shift (+) by shifting selector lever toward front. For vehicles equipped with a tiptronic sport steering wheel, up-
shift must also be operated by pressing the upper left or right button (+) on the steering wheel. 2) Operate down-shift (-) by shifting selector lever toward rear. For vehicles equipped with a tiptronic sport steering wheel,
down-shift must also be operated by pressing the lower left or right button (-) on the steering wheel.
Pa
ge 39 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-260

Display group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective
actions
012
1 Type of drive,
load Driving without load, e.g. driving on
flat surface E

Driving under load, e.g. uphill
driving B

2 Dynamic code
number
Calculated from drive resistance
index and driver evaluation 0...256 not yet
applicable

3
Drive resistance
index Necessary for calculation of
dynamic code number 0...256

4 Driver evaluation
Necessary for calculation of
dynamic code number 0...256
Pa
ge 40 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14