relay AUDI A6 1998 C5 / 2.G 01E Transmission Bearing House And Torsen Differential Workshop Manual

34-66


- Take input shaft -A- with selector rod and selector fork for 3rd and 4th
gear out at an angle from bearing plate.

Removing and installing reverse gear Page 34
-114
. - Unscrew hex bolt -D-, take off spring clasp -B- and retaining plate -A-,
pull out shaft -C- for reverse idler gear.
- Take out spring, synchro-ring and reverse idler gear.
- Take off relay lever for reverse gear.
Pa
ge 14 of 38 Bearin
g housin
g, Torsen differential, end cover, internal selector mechanism, in
put shaft, drive
pinion and hollow shaft, rem...
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.5

34-70


- Fit relay lever -A- for reverse gear onto bolt for relay lever. Watch
position of pin when doing this (limits relay lever travel to synchro-ring).
- Insert sliding gear -B- and engage relay lever with groove on sliding
gear.
- Insert synchro-ring -C-.
Installation position: position flat on circumference of synchro-ring
towards input shaft (not as yet fitted) (arrow -1-)
- Insert spring.
Installation position: hook single angled end into recess on synchro-
ring (arrow -2-). Turn double angled end anti-clockwise and hook into
opening in bearing plate (arrow -3-)
Pa
ge 19 of 38 Bearin
g housin
g, Torsen differential, end cover, internal selector mechanism, in
put shaft, drive
pinion and hollow shaft, rem...
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.5

34-72


- Slide inner race (arrow -C-) for cylinder roller bearing onto main shaft at
flange for end cover (clearance fit).
- Fit circlip (arrow -B-) using right-angled circlip pliers.

- Engage recess in follower for reverse gear with the free end of relay
lever (arrow -A-).
- Slide selector rod for 5th and 6th through follower for reverse gear in
direction of (arrow -B-).
Pa
ge 21 of 38 Bearin
g housin
g, Torsen differential, end cover, internal selector mechanism, in
put shaft, drive
pinion and hollow shaft, rem...
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.34.5