AUDI A6 1998 C5 / 2.G ATQ Engine Check DTC Memory And Erase DTC Memory Owner's Manual
Manufacturer: AUDI, Model Year: 1998, Model line: A6, Model: AUDI A6 1998 C5 / 2.GPages: 52, PDF Size: 0.18 MB
Page 21 of 52

01-32
 
DTC  
DTC text  
Corrective action  
SAE  
VAG  
  
  
P1115   17523   Bank 1, sensor 1, heating circuit  
Short circuit to Ground (GND)
1)  - Check oxygen sensor heating   Page 24
-116
P1116   17524   Bank 1, sensor 1, heating circuit  
Open circuit
1)    
  
P1117   17525   Bank 2, sensor 1, heating circuit  
Short circuit to Ground (GND)
1)    
P1118   17526   Bank 2, sensor 1, heating circuit  
Open circuit
1)    
  
P1119   17527   Bank 2, sensor 1, heating circuit  
Short circuit to Ground (GND)
1)    
  
P1120   17528   Bank 2, sensor 1, heating circuit  
Open circuit
1)    
  
P1121   17529   Bank 2, sensor 2, heating circuit  
Short circuit to Ground (GND)
1)    
P1122   17530   Bank 2, sensor 2, heating circuit    
Pa
ge 21 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2 
Page 22 of 52

Open circuit
1)  
  
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized 
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL)   Page 01
-3 .  
Pa
ge 22 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2 
Page 23 of 52

01-33
 
DTC  
DTC text  
Corrective action  
SAE  
VAG  
  
  
P1127   17535   Bank 1, mixture 
adaptation (mult.)  
System too rich 
1)  - Road test vehicle (fuel in oil). 
- Check fuel system pressure   Page 24
-30
P1128   17536   Bank 1, mixture 
adaptation (mult.)  
System too lean 
1)  - Check Mass Air Flow (MAF) sensor   Page 24
-56
- Check intake system for proper seal   Page 24
-64
P1129   17537   Bank 2, mixture 
adaptation (mult.)  
System too rich 
1)  - Check oxygen sensor before catalytic converter   Page 24
-76
P1130   17538   Bank 2, mixture 
adaptation (mult.)  
System too lean 
1)  - Check oxygen sensor behind catalytic converter   Page 24
-97
- Check fuel injectors   Page 24
-36
 
P1131   17539   Bank 2, sensor 1  
Internal resistance too 
large 
1)  - Next check signal wires for contact resistance => page   Page 24
-91
 ; if there 
are no contact resistances: Replace oxygen sensor 
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized 
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL)   Page 01
-3 .  
Note:  
Pa
ge 23 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2 
Page 24 of 52

mult. = multiplicative, means that malfunction is valid across entire range of engine speed and engine load. 
Pa
ge 24 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2 
Page 25 of 52

01-34
 
DTC  
DTC text  
Corrective action  
SAE  
VAG  
  
  
P1136   17544   Bank 1, mixture 
adaptation (add.)  
System too lean 
1)  - Road test vehicle (fuel in oil).
- Check fuel system pressure   Page 24
-30
P1137   17545   Bank 1, mixture 
adaptation (add.)  
System too rich 
1)  - Check Mass Air Flow (MAF) sensor   Page 24
-56
- Check oxygen sensor before catalytic converter   Page 24
-76
P1138   17546   Bank 2, mixture 
adaptation (add.)  
System too lean 
1)  - Check oxygen sensor behind catalytic converter   Page 24
-97
P1139   17547   Bank 2, mixture 
adaptation (add.)  
System too rich 
1)  - Check Evaporative Emission (EVAP) Canister Purge Regulator Valve   Page 
24
-128
 
P1140   17548   Bank 2, sensor 2  
Internal resistance too 
large 
1)  - Next check signal wires for contact resistance => page   Page 24
-114
 ; if 
there are no contact resistances: Replace oxygen sensor 
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized 
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL)   Page 01
-3 .  
Note:  
add = additive, means that malfunction is only valid at closed throttle (idle). 
Pa
ge 25 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2 
Page 26 of 52

01-35
 
DTC  
DTC text  
Corrective action  
SAE  
VAG  
  
  
P1141   17549   Load detection  
Implausible value  - Check to be sure the correct throttle valve control module is installed (part 
number) 
- Check Mass Air Flow (MAF) sensor   Page 24
-56
P1142   17550   Load detection  
Limit not reached    
P1143   17551   Load detection  
Limit exceeded    
P1147   17555   Oxygen sensor control, bank 
2  
System too lean  - Check oxygen sensor adaptation values and regulation   Page 24
-83
P1148   17556   Oxygen sensor control, bank 
2  
System too rich    
Pa
ge 26 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2 
Page 27 of 52

01-36
 
DTC  
DTC text  
Corrective action  
SAE  
VAG  
  
  
P1149   17557   Oxygen sensor control, bank 1  
Unplausible control value  - Check oxygen sensor adaptation values and 
regulation  Page 24
-83
 
- Check fuel system pressure   Page 24
-30
P1150   17558   Oxygen sensor control, bank 2  
Unplausible control value  - Check intake system for proper seal   Page 24
-
64
 
P1171   17579   Angle sensor -2- for throttle drive (power accelerator 
actuation) -G188-  
Implausible signal
2)3)
  - Check angle sensor -1- for throttle drive   Page 
24
-148
 
P1172   17580   Angle sensor -2- for throttle drive (power accelerator 
actuation) -G188-  
Signal too small 
2) 3)
    
P1173   17581   Angle sensor -2- for throttle drive (power accelerator 
actuation) -G188-  
Signal too large 
2) 3)
    
  
2) For these malfunctions, ECM switches on the EPC warning lamp in instrument cluster. Significance of EPC warning lamp   
Page 24
-136
 .  
3) For these malfunctions, ECM switches on the exhaust warning lamp in instrument cluster immediately after recognizing the 
malfunction. Meaning of Malfunction Indicator Lamp (MIL)   Page 01
-3 .  
Pa
ge 27 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2 
Page 28 of 52

01-37
 
DTC  
DTC text  
Corrective action  
SAE  
VAG  
  
  
P1176   17584   Bank 1, oxygen sensor correction behind 
catalytic converter  
Control limit reached 
1)  - Check oxygen sensor aging of oxygen sensor before 
catalytic converter  
 Page 24
-93
 
P1177   17585   Bank 2, oxygen sensor correction behind 
catalytic converter  
Control limit reached 
1)  - Check oxygen sensor and oxygen sensor control behind 
catalytic converter  
 Page 24
-97
 
P1213   17621   Cylinder 1 fuel injector -N30-  
Short circuit to B+
1)  - Check fuel injectors   Page 24
-36
P1214   17622   Cylinder 2 fuel injector -N31-  
Short circuit to B+
1)    
P1215   17623   Cylinder 3 fuel injector -N32-  
Short circuit to B+1)    
P1216   17624   Cylinder 4 fuel injector -N33-  
Short circuit to B+1)    
P1217   17625   Cylinder 5 fuel injector -N83-  
Short circuit to B+1)    
P1218   17626   Cylinder 6 fuel injector -N84-  
Short circuit to B+1)    
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized 
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL)   Page 01
-3 .  
Pa
ge 28 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2 
Page 29 of 52

01-38
 
DTC  
DTC text  
Corrective action  
SAE  
VAG  
  
  
P1225   17633   Cylinder 1 fuel injector -N30-  
Short circuit to Ground (GND)
1)  - Check fuel injectors   Page 24
-36
P1226   17634   Cylinder 2 fuel injector -N31-  
Short circuit to Ground (GND)
1)    
P1227   17635   Cylinder 3 fuel injector -N32-  
Short circuit to Ground (GND)1)    
P1228   17636   Cylinder 4 fuel injector -N33-  
Short circuit to Ground (GND)1)    
P1229   17637   Cylinder 5 fuel injector -N83-  
Short circuit to Ground (GND)1)    
P1230   17638   Cylinder 6 fuel injector -N84-  
Short circuit to Ground (GND)1)    
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized 
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL)   Page 01
-3 .  
Pa
ge 29 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2 
Page 30 of 52

01-39
 
DTC  
DTC text  
Corrective action  
SAE  
VAG  
  
  
P1237   17645   Cylinder 1 fuel injector -N30- 
 
Open circuit
1)  - Check fuel injectors   Page 24
-36
P1238   17646   Cylinder 2 fuel injector -N31- 
 
Open circuit
1)    
P1239   17647   Cylinder 3 fuel injector -N32- 
 
Open circuit1)    
P1240   17648   Cylinder 4 fuel injector -N33- 
 
Open circuit1)    
P1241   17649   Cylinder 5 fuel injector -N83- 
 
Open circuit1)    
P1242   17650   Cylinder 6 fuel injector -N84- 
 
Open circuit1)    
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized 
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL)   Page 01
-3 .  
Pa
ge 30 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2