fuse AUDI A6 1999 C5 / 2.G 01E Transmission Clutch Mechanism Service Workshop Manual

30-9


Clutch Pedal Position (CPP) switch -F 194-,
removing and installing

Note
The clutch pedal position (CPP) switch -F194-
ensures that the engine can only be started with the
clutch pedal depressed.
1 -
Mounting bracket
2 -
Cable bracket
3 -
Fuse
4 -
Bolt
Lock into clutch pedal
5 -
Clutch pedal Removing and installing Page 30
-5
Pa
ge 9 of 27 Clutch mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.30.1

30-24

- Remove driver's side storage compartment:

Repair Manual, Body Interior, Repair Group
68


Repair Manual, Electrical Equipment, Repair Group 97
- Always replace seal -C-.
- Make sure seal does not cover chassis opening and elevated edge of
sheet metal.
- Insert E-Box in securing point -B- and tighten nuts -A- to 4 Nm.
- Press cover on by hand and tighten bolts -A- diagonally to 4 Nm (also
see inscription on cover).
- Install engine wiring harness and connect harness connector in
connector station.
- Install engine control module and if necessary, auxiliary relay carrier
and auxiliary fuse holder.
Pa
ge 24 of 27 Clutch mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.30.1