clock AUDI A6 1999 C5 / 2.G 01E Transmission Final Drive Pinion Adjustment Workshop Manual

39-50

Performing check measurement

Checking dimension "r"

- Install drive pinion with determined shims "S3"
and "S4" and turn 5 turns in both directions.

Note:
Then, (after removing universal mandrel) check again that the dial gauge,
with master gauge VW 385/30 in place, indicates "0" with 2 mm preload,
otherwise correct adjustments. - Insert universal mandrel, Page 39
-45
, "determining measurement
'e'" and perform check measurement.
- Read off dial gauge anti-clockwise (red scale).

If the shims have been correctly selected, the deviation "r" (marked
on outer circumference of ring gear) must be shown - within a
tolerance of 0.04 mm
Pa
ge 15 of 16 Drive
pinion, ad
justin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.7