display AUDI A6 1999 C5 / 2.G 01V Transmission Read Measuring Value Block E18/2 Owner's Guide

01-257

Display
group
number Display
field Description
Test requirements
Spec. value
V.A.G1551
display Corrective actions
009
3 Throttle valve value or
value from accelerator
pedal position While
standing idle 0...1 % When accelerating from idle
to Wide Open Throttle (WOT),
%-value increases steadily.


Wide Open
Throttle
(WOT)
99...100 % - See DTC table, DTC
18269 / P1861 page 01
-
45

- See also display group
number 002, display field 2

4
2)
Transmission input
torque While
driving
1) Nm Should be like display field 1.
1) While driving, a second mechanic is required to read specifications. 2) This display field is not displayed until model year 2000 (May 1999)
Pa
ge 37 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-258

Display
group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
010
1 Torque increase in
torque converter While driving
1)
0...3.2
Calculated by the Transmission
Control Module (TCM) from the
torque converter slip speed

2 Engine speed
(RPM) With engine
running approx. 0...8200
RPM - See DTC table, DTC 17968 /
P1560 page 01
-45


3 Gear selected See display group number 1, display field 4

4
2)
Vehicle acceleration
(actual) While
driving
1) Min. -10 m/s2
1) While driving, a second mechanic is required to read specifications. 2) This display field is not displayed until model year 2000 (May 1999)
Pa
ge 38 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-259

Display group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
011 1 Selector lever
position See display group number 4, display field 2

2 Tiptronic Switch -
F189- Selector lever in tiptronic
gate M-shift
- Perform electrical test
page 01
-273


Selector lever not in
tiptronic gate -

3 Tiptronic Switch -
F189-
(up/down shift) Selector lever in tiptronic
gate, select gears
- Perform electrical test
page 01
-273


Shift up
1)
Up-shift

Shift down 2)
Down-shift
1) Operate up-shift (+) by shifting selector lever toward front. For vehicles equipped with a tiptronic sport steering wheel, up-
shift must also be operated by pressing the upper left or right button (+) on the steering wheel. 2) Operate down-shift (-) by shifting selector lever toward rear. For vehicles equipped with a tiptronic sport steering wheel,
down-shift must also be operated by pressing the lower left or right button (-) on the steering wheel.
Pa
ge 39 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-260

Display group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective
actions
012
1 Type of drive,
load Driving without load, e.g. driving on
flat surface E

Driving under load, e.g. uphill
driving B

2 Dynamic code
number
Calculated from drive resistance
index and driver evaluation 0...256 not yet
applicable

3
Drive resistance
index Necessary for calculation of
dynamic code number 0...256

4 Driver evaluation
Necessary for calculation of
dynamic code number 0...256
Pa
ge 40 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-261

Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
013
1)
1 CAN-bus
normalizing torque While standing with
ignition switched on Nm
2 CAN-bus engine
code
0 ... 63
- See DTC table, DTC
18157/P1749 and 18249 /
P1841 page 01
-45

3 CAN-bus
Transmission
code
1
- Check coding of Engine
Control Module (ECM)
4 CAN-bus software
version code
0 ... 63
- See DTC table, DTC 18263 /
P1855 page 01
-45

1) This display group number is not displayed until model year 2000 (May 1999)
Notes for display group number 013;
Display field 2 and 4: When replacing the ECM, the same indication that appeared for the old control module should
appear after installation. If this is not the case, the wrong ECM was installed, or it is wrongly coded.
Pa
ge 41 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-262

Display group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
125 1
Reception of an engine
message via the CAN-bus While driving
1)
Received 1
- See DTC table, DTC
18258 / P1850 page
01
-45



Not received
0
2)
- Perform electrical test
page 01
-273


2
Reception of an ABS
message via the CAN-bus While driving
1)
Received 1
- See DTC table, DTC
18259 / P1851 page
01
-45



Not received
0
2)
- Perform electrical test
page 01
-273

1) While driving, a second mechanic is required to read specifications. 2) If "0" is shown and there are no DTCs stored in memory, the relevant control module is not CAN capable (or is faulty).
Pa
ge 42 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14