ECO mode AUDI A6 1999 C5 / 2.G 01V Transmission Read Measuring Value Block E18/2 Workshop Manual

01-249

Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
005
3 Solenoid valve
3 -N90- While
driving
1) Gear selected
- See DTC table, DTC
17145/P0761, 17146/P0762 and
17147/P0763 page 01
-45


D (down-shift 5
to 4 gear) X

D (3, 4. and 5
gear) x or 0
2)
- Perform electrical test page
01
-273


R, N, D (1 and
2 gear) 2 (1
gear) 0

4 Gear selected See display group number 001, display field 4 1) While driving, a second mechanic is required to read specifications. 2) The solenoid valve is switched momentarily while driving, meaning that the mode changes from display "0" to "X" and then
again to "0". This switching in these gears is not relevant.
Notes for display group number 5, display field 1 to 3;
Unswitched solenoid valves (inactive) are indicated with "0", switched solenoid valves (active) are indicated with "1".
Pa
ge 27 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-257

Display
group
number Display
field Description
Test requirements
Spec. value
V.A.G1551
display Corrective actions
009
3 Throttle valve value or
value from accelerator
pedal position While
standing idle 0...1 % When accelerating from idle
to Wide Open Throttle (WOT),
%-value increases steadily.


Wide Open
Throttle
(WOT)
99...100 % - See DTC table, DTC
18269 / P1861 page 01
-
45

- See also display group
number 002, display field 2

4
2)
Transmission input
torque While
driving
1) Nm Should be like display field 1.
1) While driving, a second mechanic is required to read specifications. 2) This display field is not displayed until model year 2000 (May 1999)
Pa
ge 37 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-258

Display
group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
010
1 Torque increase in
torque converter While driving
1)
0...3.2
Calculated by the Transmission
Control Module (TCM) from the
torque converter slip speed

2 Engine speed
(RPM) With engine
running approx. 0...8200
RPM - See DTC table, DTC 17968 /
P1560 page 01
-45


3 Gear selected See display group number 1, display field 4

4
2)
Vehicle acceleration
(actual) While
driving
1) Min. -10 m/s2
1) While driving, a second mechanic is required to read specifications. 2) This display field is not displayed until model year 2000 (May 1999)
Pa
ge 38 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14