engine AUDI A6 1999 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual

AUDI A6 1999 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual A6 1999 C5 / 2.G AUDI AUDI https://www.carmanualsonline.info/img/6/950/w960_950-0.png AUDI A6 1999 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual

Page 1 of 38

AUDI A6 1999 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-1
 
  
Engine, disassembling and 
assembling Lock carrier, moving into service position
 
Special tools and equipment  
3369 support tool  
1 - 
Bolts 
45 Nm (33 ft lb)
2 - 
Bolts 45 Nm (33 ft lb)

Page 19 of 38

AUDI A6 1999 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-17
      
Installing  
     
Note:  
     When installing ribbed belt, make sure it is 
seated correctly on the pulley. 
     
-  Place ribbed belt on belt pulleys for crankshaft, 
viscous fan and

Page 21 of 38

AUDI A6 1999 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-19
      
Installing  
      Installation is the reverse of removal, noting the 
following:  
     
-  Install V-belt and loosely bolt both halves of belt 
pulley to coolant pump. 
     
-  Slowly

Page 32 of 38

AUDI A6 1999 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-29
      
Toothed belt, removing and installing
 
     
Removing  
     
Engine installed 
     Lock carrier in service position   Page 13
-1 
     
Special tools and equipment  
      V159 pin wre

Page 35 of 38

AUDI A6 1999 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-32
      
Installing (adjust valve timing)  
     
Note:  
     
Use the following procedure to adjust toothed 
belt, even for repairs that only require removal 
of toothed belt from camshaft gear.

Page 37 of 38

AUDI A6 1999 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-34
 
    
-  Counterhold toothed belt tensioner using 2 pin spanner -B- and tighten 
mounting screw -3-. 
    
Note:  
When installing the ribbed belt, make sure it is seated correctly on the 
pull