buttons AUDI A6 2000 C5 / 2.G ATW Engine Basic Setting Workshop Manual

- Press buttons -0- and -4- to select "Initiate basic setting" and press -Q-
button to confirm input.
Basic Setting
Q
Enter displa
y group number XXX

When indicated on display
- Input desired display group number.
Pa
ge 3 of 5 Basic Settin
g (function 04
)
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.5

01-60

Example:

- Press buttons -0-, -0- and -0- to select "display
group number 000" and press -Q- button to
confirm input.

Note:
After selecting display group number, the EVAP
valve is closed and A/C compressor switched off. System in basic setting 0
Q
1
2
3
4
5
6
7
8
9
10

Indicated on display
Note:
For display group number 000, measured values are displayed as a
decimal. Display can be printed out when printer is switched on.To switch to a different display group, proceed as follows:
Display group
VAG1551 Scan Tool
VAS5051 tester
higher Press button -3-
Press button.
Lower Press button -1-
Press button. -
If specified values are obtained in all display fields, press button.
Rapid data transfer
HELP
Select function XX

Indicated on display (function selection)
Pa
ge 4 of 5 Basic Settin
g (function 04
)
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.5