Memory AUDI A6 2008 C6 / 3.G Infotainment MMI Operating Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2008, Model line: A6, Model: AUDI A6 2008 C6 / 3.GPages: 193, PDF Size: 6.18 MB
Page 60 of 193
Listening to the radio 58
Note
You can delete only one or all stations from the memory list
page 61.
Selecting a stored station
Important: A station must be stored in the memory list
page 57.
– Press the Memory control button. The memory list will be
displayed.
– To select a station from the memory list, turn the rotary
pushbutton to the station.
– Press the rotary pushbutton. The system will tune to the
station.
Note
Why don't you try selecting a stored radio station using the multi-
function steering wheel page 130?
Moving a stored station
Important: A station must be stored in the memory list
page 57.
– Press the Memory control button. The memory list will be
displayed.
– Turn the rotary pushbutton to Move station name and
press to confirm.– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the station to the position on the memory list,
press the rotary pushbutton.
Other settings
Traffic Programme
– Select: Function selector button > function
selector button > Tr a f f i c p r o g r a m m e.
The Traffic Programme function will interrupt the current broadcast
or playback with the traffic reports of an FM station if:
•You have tuned to an FM station that does not broadcast any
traffic reports.
•You have tuned to an MW, LW or DAB* station.
•You have selected another audio source (e.g. CD) or navigation*
mode.
The display of the TP symbol in the heading page 42, fig. 31 of the
display shows you whether the Traffic Programme is activated and
traffic reports will cut in:
RADIO
SETUP
Page 63 of 193
Listening to the radio61
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Deleting last stations
Important: The radio must be set to the FM waveband
page 54.
– Select: Function selector button > function
selector button > Delete last stations.
Use this function to delete your favourite FM stations, which are
listed in the first five positions of the station list page 54, fig. 45.
A new list of favourite stations will be compiled automatically.
Note
You can turn the display of your favourite FM stations on and off
page 60.
Deleting stored stations
Important: A station must be stored in the memory list
page 57.
– Select: Function selector button > function
selector button > Delete stored stations > Delete
individually or Delete all entries.
Delete individually
Select Delete individually and then select the station you would like
to delete by turning and pressing the rotary pushbutton.
Delete all entries
Select Delete all entries by turning and pressing the rotary
pushbutton.
Applies to vehicles: with digital radio (DAB)
Displaying radio texts
Important: The radio must be set to the DAB waveband
page 54.
– Select: Function selector button > control button
Tu n e > TEXT.
Radio texts are additional pieces of information that are broadcast
by some radio stations (e.g. station name, artist or track).
Applies to vehicles: with digital radio (DAB)
Displaying data services
Important: The radio must be set to the DAB waveband
page 54.
– Select: Function selector button > control button
Tuning > INFO.
Some stations also use data services to broadcast images.
Applies to vehicles: with digital radio (DAB)
Service Following
Important: The radio must be set to the DAB waveband
page 54.
– Select: Function selector button > function
selector button > Service Following.
Service Following on
The activated Service Following function tries to retain the current
radio station even if you leave its transmission area. While the auto-
RADIO
SETUP
RADIO
SETUP
RADIO
RADIO
RADIO
SETUP
!
Page 65 of 193
Playing media63
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Playing media
Introduction
Your MMI system also disposes of a CD function which does not
differ at all from that of a normal CD changer. Insert an audio CD or
MP3/ WMA CD into the CD changer page 12. You can then select
individual tracks directly, shuffle the CD tracks in random order or
play each track for just a few seconds. In addition, you can connect
a portable player (e.g. an iPod or a USB memory device) to the Audi
music interface and operate it via the MMI control console.
Activating media
Important: The MMI system must be switched on and a CD
must be inserted into the CD changer page 12, or a port-
able player must be connected to the Audi music inter-
face*
8) page 15.Audio source: CD
– Press the function selector button marked . The
inserted CD will then be played.
– If the list of CD tracks page 65, fig. 57 does not appear
on the MMI display, press the control button for Source
fig. 54.
– Turn the rotary pushbutton to CD fig. 54.
– Press the rotary pushbutton to select CD as the source.
The inserted CD will then be played.
Audio source: Audi music interface*
– Press the function selector button marked . The
tracks on the connected portable player will be played.
– If the list of tracks on a connected portable player
page 64, fig. 56 does not appear on the MMI display,
press the control button for Source.
– Turn the rotary pushbutton to Audi music interface
fig. 54.
– To select Audi music interface as the source, press the
rotary pushbutton. The tracks on the connected portable
player will be played.
Note
The playback will be interrupted by traffic announcements if the
Traffic Programme function is active page 58.
8)Still under development at the time of printing.
Fig. 54 List of possible
audio/video sources
MEDIA
MEDIA
!
Page 75 of 193
Television73
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control Info bar
After changing the channel or updating the contents, an info bar
will briefly be displayed.
Depending on availability, the info bar of a TV channel/radio station
can indicate:
Time at which the current programme starts and ends
Identification of digital (DVB-T) or analog channel
Channel name
Name of current programme
EPG availability
Teletext availability
Current audio format - dual channel sound (sound channel)
Current audio format - stereo
No symbol is displayed for the audio format Mono.
Interference
Short periods of interference on digital channels are indicated by a
freeze frame, muting of the volume and a radio tower symbol with
a crossed-out loudspeaker symbol. Long periods of interference or
no DVB-T reception are indicated by the blacking out of the MMI
display, muting of the volume, the radio tower symbol and the
symbol for signal disruption.When the signal for analog channels becomes weaker, the sound
quality worsens (hiss). No TV reception is indicated by the radio
tower symbol with the symbol for signal disruption.
A channel selected from the memory list that cannot be received is
marked with the tower radio symbol, the symbol for "No TV recep-
tion", the blacking out of the MMI display and muting of the volume.
Thermal cut-out
The thermal cut-out of the television receiver switches the picture
and sound off temporarily if the outside temperature is unusually
high. A thermometer will appear in the MMI display.
Applies to vehicles: with analog TV and DVB-T
Selecting TV channels
The automatic channel search selects channels with good
reception.
Important: TV mode must be activated page 71.
Selecting the next available channel
– Briefly turn the rotary pushbutton when the picture has
expanded to the full MMI screen. A list of TV channels will
appear.
Fi g . 6 5 I n fo b a r o f a T V
channel
A1
A2
A3
A4
A5
A6
A7
A8
Fig. 66 Selecting chan-
nels manually (up)
Page 76 of 193
Television 74
– Press the control button for TV control.
– Turn the rotary pushbutton to select >| (Seek up) or |<
(Seek down).
– Press the rotary pushbutton to start the automatic
channel search. The system will select the next available
channel.
Next channel
– Briefly turn the rotary pushbutton when the picture has
expanded to the full MMI screen. A list of TV channels will
appear.
– Press the control button for TV control.
– Turn the rotary pushbutton to select >> (Manual up)
page 73, fig. 66 or << (Manual down).
– Press the rotary pushbutton to select the previous/next
channel.
In the case of digital channels you change from one channel to
another within the same multiplex. The number of the current
channel within the multiplex is displayed in the centre of the func-
tion wheel below the channel number. Example: Channel number
Ch.32 page 73, fig. 66 is number 2 within the multiplex.
Note
It is possible that you will not be able to receive a TV channel on
every channel number.
Applies to vehicles: with DVB-T
Storing TV channels
You can store up to 60 channels in the memory list.
Important: You must first select a TV channel page 73.
Using the rotary pushbutton
– Press and hold the rotary pushbutton until the channel
appears in a free position on the memory list fig. 67.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
A2A1
Fig. 67 Storing a
channel
Fig. 68 Storing a
channel
Page 77 of 193
Television75
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– To store the channel to the position on the memory list,
press the rotary pushbutton.
Using the Memory control button
– Press the Memory control button.
– Turn the rotary pushbutton and select Store channel
name page 74, fig. 67.
– Press the rotary pushbutton. The selected channel will
appear in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the channel to the position on the memory list,
press the rotary pushbutton.
Using the TV control control button
– Press the control button for TV control.
– Turn the rotary pushbutton to STORE page 74, fig. 68.
– Press the rotary pushbutton. The selected channel will
appear in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the channel to the position on the memory list,
press the rotary pushbutton.
Note
You can delete only one or all channels from the memory list
page 76.
Applies to vehicles: with DVB-T
Selecting a stored channel
Important: A channel must be stored in the memory list
page 74.
– Press the Memory control button. The memory list will be
displayed.
– To select a channel from the memory list, turn the rotary
pushbutton to the channel.
– Press the rotary pushbutton. The channel will be
selected.
Note
Why don't you try selecting a stored TV channel using the multi-
function steering wheel page 131?
Applies to vehicles: with DVB-T
Moving a stored channel
Important: A channel must be stored in the memory list
page 74.
– Press the Memory control button. The memory list will be
displayed.
– Turn the rotary pushbutton to select the channel and
press the rotary pushbutton.
– Press the rotary pushbutton again and hold it down until
Store channel name appears in the MMI display, or
– Turn the rotary pushbutton to Move channel name and
press to confirm.
Page 78 of 193
Television 76
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the channel to the position on the memory list,
press the rotary pushbutton.
Applies to vehicles: with external AV source
Selecting an external AV source
AV devices can be connected to the MMI system via a
special connector cable.
Important: An AV device must be connected, and the
required AV standard must be set page 79.
– Briefly turn the rotary pushbutton when the picture has
expanded to the full MMI screen. A list of TV channels will
appear.
– Press the control button for Source. The Source menu
will appear on the MMI display fig. 69.
– Using the rotary pushbutton, select Exte rna l AV source 1
or External AV source 2 as required.– Press the rotary pushbutton to confirm the source. The
AV source picture will then appear in the MMI display.
Note
You can obtain the connector cable from an Audi dealer or special-
ised retailer.
Other settings
Applies to vehicles: with DVB-T
Deleting stored channels
Important: A channel must be stored in the memory list
page 74.
– Select: Function selector button > function
selector button > Delete stored stations > Delete
individually or Delete all entries.
You can delete only one or all channels from the memory list.
Applies to vehicles: with DVB-T
Electronic Programme Guide (EPG)
– Select: Function selector button > source TV >
control button TV control > EPG (programme informa-
tion).
Detailed information on the current and the following programmes
will be displayed.
If you select a TV channel from the overview of programmes and
press and hold the rotary pushbutton, that TV channel will be
selected as the current channel.
Fig. 69 External AV
source 1 selected
MEDIA
SETUP
MEDIA
!
Page 83 of 193
Managing the directory81
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Press the rotary pushbutton to open the entry space
Surname. The speller will appear on the MMI display
page 43.
– Using the speller, enter the name and confirm your entry
by turning the speller to mark OK and then pressing the
rotary pushbutton. The entry space will appear in the
MMI display.
– To enter more data, select an entry space using the rotary
pushbutton and proceed as described above.
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Importing entries from the phone book
Entries can be imported into the directory from the phone
book of your mobile phone.
Important: The directory must be open page 80 and the
phone pre-installation page 20 or the Bluetooth car tele-
phone kit page 25 must be activated.
Importing an entry
– Press the control button for Import. The menu From
phone book will appear on the MMI display fig. 72.– To import an entry from the list turn the rotary push-
button to mark the entry and press to confirm. The entry
will then be imported.
– To find an entry on the SIM card or in the phone book of
your mobile phone, turn the rotary pushbutton to select
Find entry page 80, fig. 70. The speller will appear on
the MMI display page 43.
– Using the speller, enter the name and confirm your entry
by turning the speller to mark OK and then pressing the
rotary pushbutton. The entry will then be imported.
Importing all entries
– Press the control button for Import. The menu From
phone book will appear on the MMI display fig. 72.
– Turn the rotary pushbutton to select Import all entries
and press it. The entries will then be imported.
You can only store up to 150 entries in the directory. If there are
more entries on the SIM card or in the phone book of your mobile
phone than there are memory positions in the directory, a message
will appear in the MMI display. You can either store entries from the
SIM card or the phone book to the free memory positions or stop the
import function.
Note
You can call up the memory capacity of the directory page 86.
Fig. 72 Importing
entries from mobile
phone book
Page 87 of 193
Managing the directory85
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Turn the rotary pushbutton and select Country.
– Press the rotary pushbutton. The speller will appear on
the MMI display page 43.
– Using the speller, enter the name of the country and
confirm your entry by turning the speller to OK and then
pressing the rotary pushbutton.
– To enter more data, select an entry space using the rotary
pushbutton and proceed as described above.
– Turn the rotary pushbutton to Store destination
page 84, fig. 79.
– Press the rotary pushbutton to store the navigation desti-
nation.
Importing a recent destination
– Turn the rotary pushbutton to select Nav. destination
(business) or Nav. destination (private).
– Press the rotary pushbutton. An entry space will now
appear page 84, fig. 78.
– Turn the rotary pushbutton to Copy from last
destinations page 84, fig. 78. A list of navigation desti-
nations will appear.
– Turn the rotary pushbutton to select a navigation desti-
nation.
– Press the rotary pushbutton to import the navigation
destination.
– Turn the rotary pushbutton to Store destination
page 84, fig. 79.– Press the rotary pushbutton to store the navigation desti-
nation.
All directory entries can be stored with two navigation destinations.
These navigation* destinations can be accessed via the Memory
control button (Load from directory) page 115.
Note
You can also set a navigation destination as a top destination. Top
destinations are displayed in the navigation main menu
page 116.
Changing or copying an entry
Entries are stored in the directory as address cards which
you can change anytime.
Important: The directory must first be opened page 80.
– Press the control button for Edit.
– To change an entry, turn the rotary pushbutton to Change
entry.
– To copy an entry, turn the rotary pushbutton to Copy
entry. The copied entry will be appended with (Copy).
– Press the rotary pushbutton. A list of entries will appear
in the MMI display.
– To select an entry from the list turn the rotary pushbutton
to mark the entry and press to confirm, or
– To find an entry, turn the rotary pushbutton to Find entry
and press to confirm. The speller will now appear on the
MMI display page 43. You can use it to search for a
specific entry page 82.
Page 88 of 193
Managing the directory 86
– Change the entry page 80.
To make entries quicker and easier, you can copy an existing entry
and store it under a different name.
Note
Any voice recording (name tag) made with the Speech dialogue
system* will not be copied with the directory entry.
Other settings
Memory capacity
– Select: Function selector button > control button
Edit > Memory capacity.
The memory capacity will be displayed. Up to 150 entries can be
stored in the directory.
Name tags
– Select: Function selector button > Find entry >
select Name > Play name tag or Delete name tag.
With the speech dialogue system* you can store a name tag (spoken
name or telephone number) to any entry in the directory
page 169. You can then listen to or delete these name tags via the
MMI control console.
Deleting individual entries
– Select: Function selector button > Find entry >
select Name > Delete entry, or– Select: Function selector button > control button
Edit > Delete entry > Find entry > select Name.
Deleting all entries
– Select: Function selector button > control button
Edit > Delete entry > Delete all entries, or
– Select: Function selector button > function
selector button > Delete directory.
All directory entries will now be deleted.
NAME
NAME
NAME
NAME
NAME
NAME
SETUP
!