light AUDI A8 1996 D2 / 1.G 01V Transmission Electrical And Electronic Components Workshop Manual

01-18


14 -
Transmission Range (TR) Selector Lever
Display -Y6-
Location page 01
-31
, Fig. 15
When the TR Selector Lever Display does
not light up, it indicates that the
transmission is in emergency running
mode with the Transmission Control
Module (TCM) inactive. All segments of the TR Selector Lever
Display light up, it indicates that the
transmission is in emergency running
mode with the TCM active.
15 -
Kick down switch -F8- Location page 01
-32
, Fig. 16
Can be checked electrically page 01
-
273
and via reading measured value block
page 01
-186

Pa
ge 8 of 23 Electrical/electronic com
ponents and locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.2

01-19


Repair Manual, Brake System, Repair Group 46

16 -
Brake Light Switch -F-
Location: page 01
-33
, Fig. 17
Removing and installingCan be checked electrically page 01
-
273
and via reading measured value block
page 01
-186

Pa
ge 9 of 23 Electrical/electronic com
ponents and locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.2

01-33


The brake light switch -arrow- is located on the pedal cluster.
Brake light switch, removing and installing
Repair Manual, Brake System, Repair Group 46

Note:
For engine with E-gas, the brake light signal is transmitted from the
engine control module to the transmission control module via the CAN-
Bus. Fig. 17 Brake light switch -F-
Pa
ge 23 of 23 Electrical/electronic com
ponents and locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.2