display AUDI A8 1996 D2 / 1.G 01V Transmission Read Measuring Value Block E 17 Owner's Manual

01-208
Notes for display field 4 of display group number 004:

This display field 4 is only valid for vehicles without CAN-bus, refer to next page for vehicles with CAN-bus. A)
Engine intervention is only activated during the shifting process. Depending on the driving situation, engine intervention
may only be activated briefly, i.e. the relatively slow data transfer to the V.A.G1551 can miss this brief engine intervention
under certain driving conditions.
A) There is a distinction made between vehicles with and without CAN-bus. For information on which vehicles are equipped
with CAN-bus
Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 00, engine codes, unit allocation, ratios, equipment

Pa
ge 28 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-209
Only for transmission with hydraulic control -E17-
Display group
number Display
field Description
Test
requirements Spec. value
on
V.A.G 1551
display Corrective
actions
004

with
CAN-bus 4 Information of On Board
Diagnostic (OBD)
Indicated on display from left to
right While driving
1)

Malfunction display switched on
1

switched off 0

Trip completed 1

not completed 0 not applicable

Transmission warm-up
completed 1

not completed 0

Engine start
recognized 1

not recognized 0
1) While driving, a second mechanic is required to read specifications.
Notes for display field 4 of display group number 004 see next page
Pa
ge 29 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-210
Notes for display field 4 of display group number 004:

This display field 4 is only valid for vehicles with CAN-bus, refer to previous display field 4 for vehicles without CAN-bus.
A)
A) There is a distinction made between vehicles with and without CAN-bus. For information on which vehicles are equipped
with CAN-bus
Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 00, engine codes, aggregate allocation, ratios,
equipment

Pa
ge 30 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-211
Only for transmission with hydraulic control -E17-
Display
group No. Display
field Description
Test requirements
Spec. value on
V.A.G 1551
display Corrective actions
005
1 Solenoid valve 1 -
N88-
2) while
driving
1) Gear
selected
- See appropriate DTC for
solenoid valve 1 -N88-
2)

R, 5, 2, 1,
1M 1

3, 4 0
- Perform electrical test
page 01
-273


2 Solenoid valve 2 -
N89-
3) while
driving
1) Gear
selected
- See appropriate DTC for
solenoid valve 2 -N89-
3)

3, 2, 1 1
Continue


R, 1M, 4, 5 0
- Perform electrical test
page 01
-273

1) While driving, a second mechanic is required to read specifications. 2) Solenoid valve 1 -N88- is also referred to as shift valve 1 solenoid valve 1 -N88- 3) Solenoid valve 2 -N89- is also referred to as shift valve 2 solenoid valve 2 -N89-
Pa
ge 31 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-212
Only for transmission with hydraulic control -E17-
Display
group No. Display
field Description
Test requirements
Spec. value on
V.A.G 1551
display Corrective actions
005
3 Solenoid valve 3 -
N90-
2) While
driving
1) Gear
selected
- See appropriate DTC for
solenoid valve 3 -N90-
2)

3, 4, 5 X

R, 1, 1M, 2 0
- Perform electrical test
page 01
-273


4 Gear selected See display group number 1, display field 4
1) While driving, a second mechanic is required to read specifications. 2) Solenoid valve 3 -N90- is also referred to as shift valve 3 solenoid valve 3 -N90- Notes for display group number 5, display field 1 to 3;

Un-switched solenoid valves are indicated with "0", switched solenoid valves are indicated with "1".
Variable switching solenoid valves are indicated with "X".
Pa
ge 32 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-213
Only for transmission with hydraulic control -E17-
Display
group No. Display
field Description
Test
requirements Spec. value on
V.A.G 1551
display Corrective actions
006
1 Specified current of solenoid
valve 4 -N91-
2) While driving
1)
- See DTC table, DTC
00264 page 01
-45



min. 0.1 A
- Perform electrical test
page 01
-273


max. 0.8 A

2 Specified current of solenoid
valve 5 -N92-
3) While driving
1)
- See DTC table, DTC
266 page 01
-45



min. 0.1 A
- Perform electrical test
page 01
-273

Continue


max. 0.8 A
1) While driving, a second mechanic is required to read specifications. 2) Solenoid valve 4 -N91- is also referred to as pressure control valve 1 for auto. transmission -N215-. 3) Solenoid valve 5 -N92- is also referred to as pressure control valve 2 for auto. transmission -N216-.
Pa
ge 33 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-214
Only for transmission with hydraulic control -E17-
Display
group No. Display
field Description
Test
requirements Spec. value on
V.A.G 1551
display Corrective actions
006
3 Specified current of solenoid
valve 6 -N93-
2) While driving
1)
- See DTC table, DTC
268 page 01
-45



min. 0.1 A
- Perform electrical test
page 01
-273


max. 0.8 A

4 Gear selected See display group number 1, display field 4
1) While driving, a second mechanic is required to read specifications. 2) Solenoid valve 6 -N93- is also referred to as pressure control valve 3 for auto. transmission -N217-.
Notes for specified current of solenoid valves:
Faulty solenoid valves or clutches or other malfunctions can prevent shifting into certain gears.
Pa
ge 34 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-215
Only for transmission with hydraulic control -E17-
Display
group
No. Display
field Description
Test requirements
Spec.
value on
V.A.G
1551
display Corrective actions
007 1 ATF temperature
While standing with engine
running. When temperature
sensor is faulty, a replacement
value is transmitted. ... C
- Check Transmission Fluid
(ATF) Temperature sensor -
G93-; perform electrical test
page 01
-273


2 Specified current
of solenoid valve 7
-N94-
2) While driving
1)
min. 0.1 A
- See DTC table, DTC 270
page 01
-45



max 0.8 A
- Perform electrical test
page 01
-273


3 Torque converter
lock-up clutch While driving
1)
TC open
- See DTC table, DTC 1192
page 01
-45



TC control
- Perform electrical test
page 01
-273

Continue


TC closed
Pa
ge 35 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-216
Only for transmission with hydraulic control -E17-
Display
group
No. Display
field Description
Test requirements
Spec. value on
V.A.G 1551
display Corrective actions
007
4 Torque
converter slip
speed hile
driving
1) TC open 0......standstill
RPM
- See DTC table, DTC 00297,
00660 and 01192 page 01
-45



TC control (last
shift operation at
least 20 sec ago) 20...120 RPM
Repair Manual, 5 Spd.
Automatic Transmission 01V, Repair Group 37, transmission with shift elements
- Determine which element is
faulty or not activated,
transmission with shift elements

TC closed 0...10 RPM
- Check plausibility between
engine, transmission input- and
transmission speed; Display
group number 001
1) While driving, a second mechanic is required to read specifications.
Notes for display field 4 of display group number 004 are on the next page:
Pa
ge 37 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13

01-218
Only for transmission with hydraulic control -E17-
Display
group No. Display
field Description
Test requirements
Spec. value
on V.A.G
1551
display Corrective actions
008
1
Kick down
switch -F8- Kick-
down
activated
Kick down - Check kick down switch, perform
electrical test page 01
-273


not operated -

2 Throttle valve
value
1) while
standing idle 0...1 % When accelerating from idle to
Wide Open Throttle (WOT), %-
value increases steadily.


Continue



Wide Open
Throttle
(WOT)
99...100 % - Perform electrical test page
01
-273

- See DTC table, DTC 00518 and
00638 page 01
-45

Pa
ge 39 of 49 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E17-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.13