engine coolant AUDI A8 1996 D2 / 1.G AHA ATQ Engines Lubrication System Components Workshop Manual

[x] Cancel search | Manufacturer: AUDI, Model Year: 1996, Model line: A8, Model: AUDI A8 1996 D2 / 1.G
Pages: 34, PDF Size: 0.68 MB
AUDI A8 1996 D2 / 1.G AHA ATQ Engines Lubrication System Components Workshop Manual A8 1996 D2 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/992/w960_992-0.png AUDI A8 1996 D2 / 1.G AHA ATQ Engines Lubrication System Components Workshop Manual
Search: (run flat, differential, torque, light, load capacity, night vision)

Page 8 of 34

AUDI A8 1996 D2 / 1.G AHA ATQ Engines Lubrication System Components Workshop Manual 17-5 Oil pump, oil pan, oil filter, oil cooler, removing and installing 1 - Bolt for dipstick tube 25 Nm (18 ft lb) 2 - Dipstick tube Replace O-ring 3 - Oil pan (upper part) No gasket is i

Page 15 of 34

AUDI A8 1996 D2 / 1.G AHA ATQ Engines Lubrication System Components Workshop Manual 17-11 Lock carrier in service position page 13 -1 - Open engine coolant expansion tank cap. - Place VAG1306 drip tray beneath engine. - Turn radiator drain plug countercl

Page 16 of 34

AUDI A8 1996 D2 / 1.G AHA ATQ Engines Lubrication System Components Workshop Manual 17-12 - Set 10-222A engine support bridge together with 10-222A/3 engine support adapter on fender mounting edges. - Attach 2024A engine sling to mounting eyes at front and rear of engine.

Page 27 of 34

AUDI A8 1996 D2 / 1.G AHA ATQ Engines Lubrication System Components Workshop Manual 17-23 Tightening torques Component Tightening torque Oil pan to cylinder block M6 10 Nm (7 ft lb) M8 20 Nm (15 ft lb) Oil pan (lower part) to oil pan (upper part)

Page 29 of 34

AUDI A8 1996 D2 / 1.G AHA ATQ Engines Lubrication System Components Workshop Manual 17-24 Component Tightening torque Collar screw M8 30 Nm (22 ft lb) Stabilizer bracket to subframe 1) 25 Nm (18 ft lb) Coolant drain plug to engine 20 Nm (15 ft lb) To
Search: (climate settings, ESP, transmission, oil additives, oil, engine coolant)