drain bolt AUDI A8 1998 D2 / 1.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual

38-3


Overview of the removed parts for transmission
with Park/Neutral Position (PNP) Switch -E17-
1 -
Drain plug - 40 Nm
5 mm socket-head boltRemove to drain ATF page 38
-20
2 -
Seal
Always replace
3 -
Bolt - 10 Nm Tighten bolts for oil pan in several stages in
diagonal sequence
4 -
Oil pan Removing and installing page 38
-19
5 -
Gasket
Always replace
Pa
ge 3 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-11


Overview of the removed parts for transmission
with hydraulic control E18/2
1 -
Drain plug - 40 Nm
5 mm socket-head boltRemove to drain ATF page 38
-20
2 -
Seal
Always replace
3 -
Bolt - 10 Nm Tighten bolts for oil pan in several stages in
diagonal sequence
4 -
Oil pan Removing and installing page 38
-19
5 -
Gasket
Always replace
Pa
ge 11 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1

38-20


Installing
Installation is reverse of removal, noting the following:
Note:
Drain plug and oil seal must both be replaced.
Tightening torques - Remove ATF drain plug -1- and drain ATF.
- Loosen bolts of oil pan in diagonal sequence.
- Clean all 4 magnets in oil pan recesses. Ensure full surface contact of
the magnets on the oil pan.
- Replace gaskets.
- Fill up ATF page 37
-140
.
Component
Nm
Drain plug to oil pan 40
Oil pan to transmission housing
(diagonally in sequence)
10
Pa
ge 20 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1