catalytic converter AUDI A8 2000 D2 / 1.G ATQ Engine Readiness Code Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2000, Model line: A8, Model: AUDI A8 2000 D2 / 1.GPages: 47, PDF Size: 0.14 MB
Page 5 of 47
01-80
X
X
X
X
X
X
X
X
Notes for display group 086, display field 1
Diagnostic of catalytic converter
Indication 0 = test was performed
Indication 1 = test was not performed (generate readiness code Page 01
-82
)
Indication always 0
EVAP system
Indication 0 = test was performed
Indication 1 = test was not performed (generate readiness code Page 01
-82
)
Secondary Air Injection system
Indication 0 = test was performed
Indication 1 = test was not performed (generate readiness code Page 01
-82
)
Indication always 0
Oxygen sensors
Indication 0 = test was performed
Indication 1 = test was not performed (generate readiness code Page 01
-82
)
Oxygen sensor heating
Indication 0 = test was performed
Pa
ge 5 of 47 Readiness code
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7
Page 20 of 47
01-91
Work step 6: Diagnostic of oxygen sensor
aging before catalytic converter
Test requirement
Engine continues to run at 2200 RPM.
Basic Settin
g
Q
Input display group number XXX
When indicated on display:
- Press buttons -0-, -3- and -4- to select "display group number 034" and
press -Q- button to confirm input.
System in Basic Setting 34
1
2
3
4
When indicated on display:
Note:
A few minutes may pass until a diagnostic result is reached. - Check specified value in display field 4 after indication "Test ON"
appears:
Pa
ge 20 of 47 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7
Page 21 of 47
01-92
Display fields
1 2 3 4
Display group 034: Oxygen sensor aging diagnostic, oxygen sensor before catalytic converter (bank 1)
Display xxxx/min
xxx C
x.x s
---
Indicated Engine speed
(RPM) Exhaust
temperature Period duration
Oxygen sensor
before
Catalytic
converter Diagnostic condition
Functional
range 630 to 6800
RPM 70 to 850 C
0 to 3.0 s Test OFF
Test ON
B1-S2 OK
B1-S2 not OK
Specified
value 2200 RPM
above 380 C 0.1 to 1.8 s B1-S2 OK
Notes
If "B1-S1 not OK" is displayed: Check Diagnostic
Trouble Code (DTC) memory Page 01
-15
If specified value "B1-S1 OK" is obtained:
- Press -C- button.Basic Setting
Q
Input display group number XXX
When indicated on display:
Pa
ge 21 of 47 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7
Page 23 of 47
01-93
If specified value "B2-S1 OK" is obtained:
System in Basic Setting 35
1
2
3
4
When indicated on display:
- Check specified value in display field 4.
Display fields
1 2 3 4
Display group 035: Oxygen sensor aging diagnostic, oxygen sensor before catalytic converter (bank 2)
Display xxxx/min
xxx C
x.x s
---
Indicated Engine speed
(RPM) Exhaust
temperature Period duration
Oxygen sensor
before
Catalytic
converter Diagnostic condition
Functional
range 630 to 6800
RPM 70 to 850 C
0 to 3.0 s Test OFF
Test ON
B2-S2 OK
B2-S2 not OK
Specified
value 2200 RPM
above 380 C 0.1 to 1.8 s B2-S2 OK
Notes
If "B2-S1 not OK" is displayed: Check Diagnostic
Trouble Code (DTC) memory Page 01
-15
- Press -C- button.
Pa
ge 23 of 47 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7
Page 24 of 47
01-94
Work step 7: Diagnostic of operational
readiness of oxygen sensors behind catalytic
converter
Test requirement
Engine continues to run at 2200 RPM.
Basic Setting
Q
Input displa
y group number XXX
When indicated on display:
- Press buttons -0-, -3- and -6- to select "display group number 036" and
press -Q- button to confirm input.
System in Basic Setting 36
1
2
3
4
When indicated on display:
- Check specified values in display fields 2 and 4.
Pa
ge 24 of 47 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7
Page 25 of 47
01-95
Display fields
1 2 3 4
Display group 036: Operational readiness of the oxygen sensor behind catalytic converter (bank 1 and bank 2)
Display x.xxx V
--- x.xxx V
---
Indicated Voltage of oxygen
sensors behind
catalytic converter,
bank 1 Diagnostic condition Voltage of oxygen
sensors behind
catalytic converter,
bank 2 Diagnostic condition
Functional
range 0.100 to 1.000 V
Test OFF
Test ON
B1-S2 OK
B1-S2 not OK 0.100 to 1.000 V
Test OFF
Test ON
B2-S2 OK
B2-S2 not OK
Specified
value smaller than 0.4 V
or
larger than 0.5 V B1-S2 OK smaller than 0.4 V
or
larger than 0.5 V B2-S2 OK
Notes
If "B1-S2 not OK" is
displayed: Check Diagnostic
Trouble Code (DTC) memory
Page 01
-15
If "B2-S2 not OK" is
displayed: Check Diagnostic
Trouble Code (DTC) memory
Page 01
-15
If specified value "B1-S1 OK" is obtained:
- Press -C- button.
Pa
ge 25 of 47 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7
Page 27 of 47
01-97
Display fields
1 2 3 4
Display group 037: Diagnostic of oxygen sensor control system (Bank 1)
Display xxx % x.xxx volts xxx ms
---
Indicated Load Voltage of oxygen sensors
behind catalytic converter,
bank 1 Oxygen sensor
correction value
between sensor 1
and sensor 2 (bank
1) Diagnostic condition
Functional
range 12 to
100 % 0.100 to 1.000 V -800 to 800 ms
Test OFF
Test ON
System OK
System not OK
Specified
value 12 to 26
% 0.100 to 1.000 V -800 to 800 ms System OK
Notes
If "System not OK" is displayed: Check
Diagnostic Trouble Code (DTC) memory
Page 01
-15
If specified value "Syst. OK" is obtained:
- Press -C- button. Basic Settin
g
Q
When indicated on display:
Pa
ge 27 of 47 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7
Page 29 of 47
01-98
If specified value "Syst. OK" is obtained:
System in Basic Setting 34
1
2
3
4
When indicated on display:
- Check specified value in display field 4.
Display fields
1 2 3 4
Display group 038: Diagnostic of oxygen sensor control system (Bank 2)
Display xxx % x.xxx volts xxx ms
---
Indicated Load Voltage of oxygen sensors
behind catalytic converter,
bank 2 Oxygen sensor
correction value
between sensor 2
and sensor 2 (bank
1) Diagnostic condition
Functional
range 12 to
100 % 0.100 to 1.000 V -800 to 800 ms
Test OFF
Test ON
System OK
System not OK
Specified
value 12 to 26
% 0.100 to 1.000 V -800 to 800 ms System OK
Notes
If "System not OK" is displayed: Check
Diagnostic Trouble Code (DTC) memory
Page 01
-15
- Press -C- button.
Pa
ge 29 of 47 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7
Page 30 of 47
01-99
Work step 9: Diagnostic of oxygen sensor
aging behind catalytic converter
Test requirement
Engine continues to run at 2200 RPM.
Basic Settin
g
Q
Input display group number XXX
When indicated on display:
- Press buttons -0-, -4- and -3- to select "display group number 043" and
press -Q- button to confirm input.
System in Basic Setting 43
1
2
3
4
When indicated on display:
- Check specified value in display field 4.
Pa
ge 30 of 47 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7
Page 31 of 47
01-100
Display fields
1 2 3 4
Display group 043: Oxygen sensor aging diagnostic, oxygen sensor behind catalytic converter (bank 1)
Display xxxx/min
xxx C
x.x s
---
Indicated Engine speed
(RPM) Exhaust
temperature Voltage of oxygen sensors
behind catalytic converter,
bank 1 Diagnostic condition
Functional
range 630 to 6800
RPM 70 to 850 C
0.100 to 1.000 V Test OFF
Test ON
B1-S2 OK
B1-S2 not OK
Specified
value 2200 RPM
above 380 C 0.100 to 1.000 V B1-S2 OK
Notes
If "B1-S2 not OK" is displayed: Check
Diagnostic Trouble Code (DTC) memory
Page 01
-15
If specified value "B1-S1 OK" is obtained:
- Press -C- button. Basic Settin
g
Q
Input displa
y group number XXX
When indicated on display:
-
Press buttons -0-, -4- and -4- to select "display group number 044"
Pa
ge 31 of 47 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.7