turn AUDI A8 2010 D3 / 2.G RNS_E Navigation System Manual

Overview9
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
OverviewControl unit with screenThis overview is to assist you in familiarizing yourself
with the controls and their functions.
On/Off knob
Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . .
Volume adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Button (

) for opening and closing the Display . . . . . .
Function buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Forward/reverse buttons . . . . . . . . . . . . . . . . . . . . . . . . .
Control knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tips


Please note that this Operator's Manual describes only the Audi
Navigation System plus and its components. You can find addi-
tional information on vehicle operation in your Owner's Manual.


Some the equipment shown is found only in certain model
versions or is optional equipment
Important NotesNotes on Traffic Safety
To ensure driving safety, settings in the Navigation
System must only be performed when the vehicle is
parked.The broad range of equipment in the Audio Navigation System
provides a wealth of potential entertainment and a wide variety of
information in addition to navigation.
Carry out your settings in the Navigation System only when the
vehicle is stationary. Avoid using the Navigation System while you
are driving so that you can devote your full attention to traffic. Use
the controls on the multi-function steering wheel*
page 21 while
you are driving.
WARNING


Pay attention first and foremost to your driving! As the driver
of the vehicle, you have total responsibility for operating the
vehicle safely. Therefore, when using the Navigation System func-
t io n s , m ak e c er t ai n t h at y o u a l w ay s h av e c o m p l et e c o n t ro l o f y o u r
vehicle!


Traffic today requires your full and continuous concentration.
A s t h e d ri v e r, y o u b e ar c o m p l et e re sp o n s i b il i t y fo r sa fet y i n t raff i c .
Therefore, to ensure driving safety, settings in the Navigation
System must be performed only when the vehicle is parked.
A1
11
19
A2
12
A3
16
A4
27
A5
18
A6
17
A7
17
A8
RETURN
18

Overview11
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Cleaning the controls
– First clean the controls with a brush to remove dust.
– Then wipe the controls with a clean, soft, slightly damp
cloth.Display
The Display can be cleaned with a professionally available “LCD
cleaner”. The cloth should be slightly dampened with the cleaning
fluid to clean the display.
Controls
The controls should be cleaned with a brush first so that no dirt is
trapped between the buttons and the housing. We recommend
giving the controls a final wipe with a cloth moistened with water
and dish washing detergent.
Note
Treat the display with care. Pushing on it with your finger or
touching it with sharp objects can cause dents or scratches.Switching on and offAutomatic switching on and offThe Navigation System switches on automatically after you turn on
the ignition. When you remove your key from the ignition lock, the
Navigation System will automatically switch off.What happens when it is switched on?
When the system is switched on, the start screen appears. The
o u t p u t m e n u o f t h e l a s t s e l e c t e d m a i n f u n c t i o n i s d i s p l a y e d . T h e l a s t
selected audio source is switched on automatically.
What happens when it is switched off?
When the equipment is switched off, the display darkens and the
audio source is silenced. Settings that have already been made do
not change.
Tips
The display can be switched off in the Setup menu
page 173, the
operating mode selected remains active.
Switching on/off manually
The Navigation System can also be turned on and off
manually if necessary.
Fig. 3 Navigations-
system: ON/OFF knob

Overview 12
– Push the On/Off knob to switch it on and off
fig.3.The Navigation System can also be switched on and off manually if
necessary. If the Navigation System was switched off in this way
with the ignition key removed, it is still available for about 30
minutes.
If the Navigation System was switched off manually, it is not
switched on automatically the next time the ignition is turned on.
Note
To avoid discharg ing the battery, the Navigation System should n ot
be switche d o n for an unne cessarily long time with the engine off.Opening and closing displayThe display must be opened to access the drives
located behind it.
–Press the

button
fig.4 to open or close the display

fig.5.
Opening the display provides access to the DVD navigation drive
and the two card readers for SD/MMC memory cards
fig.5.
The display can also be closed using the function button, control
buttons, the control knob, the button or the
Forward/Reverse button
page 9.
The open display is automatically closed after about one minute.
Note


If the display cannot be closed, it is possible that objects in the
vicinity of the display or an incorrectly inserted SD/MMC memory
card is preventing it from being closed. Do not try to force the
display closed.


To prevent damage to the Navigation System, no foreign bodies
should be introduced into the DVD navigation drive or into the MP3
card reader.
Fig. 4 Navigation
System: Button for
opening and closing
the display
Fig. 5 Display open:
Access to the DVD
drive and the MP3 card
reader
RETURN

General system operation15
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
General system operationControlsBasic operating functions
A l l t h e f u n c t i o n s o f t h e N a v i g a t i o n S y s t e m c a n b e o p e r -
ated with four basic rules.Fig. 7 Navigation System ControlsThe buttons on the operating unit have been assigned the
following four basic functions:
1. Press one of the function keys
fig.7 (
page 16) to
reach the desired main function (e.g. radio operation,
navigation).2. Rotate and press the control knob
fig.7
(
page 17) to make a selection in the Display.
3. Press one of the control buttons
fig.7 (
page 17)
to o p e n o n e o f t h e s ub m en u s i n t h e p a r t i c ul ar m a i n fu n c -
tion. You can find the current submenus in the four
corners of the display. The four corners of the display
correspond to the four control buttons that are posi-
tioned around the control knob.
4. Press the button
fig.7 (
page 18) to
cancel a selection not yet confirmed or to return to the
next higher level.
In principle you only need to take note of the buttons described,
along with their main functions. You will be led through the oper-
ating procedures with the help of the menus, which are mostly self-
explanatory.
A1
A2
A
RETURN
A4

General system operation 18Th e fo ur control buttons organized around the control
knob
page 17, fig.10 are arranged to correspond to the bar-
shaped switch symbols in the screen corners: the top right screen
corner corresponds to the top right control button
page 17,
fig.11.
When you press a control button, a new menu group is displayed
which is assigned thematically to the particular main function.
To make orientation easier, the activated control button is illumi-
nated and the corresponding corner of the screen is highlighted in
color.
Return buttonB y p r e s s i n g t h e b u t t o n y o u w i l l j u m p b a c k o n e l e v e l i n t h e
menu hierarchy within a main function.
A selection that has not been confirmed by pressing the control
knob will be cancelled.The button is available in every menu application.
Using the button, you can also deactivate the active side
menu in the navigation map display
page 144.
Tips
If you activate the function button
page 16 within a main func-
tion, the system will automatically jump to the main menu of that
main function. Please note
page 20, “Home function”.
Forward/Reverse buttonDepending on the operating mode, the following functions are
carried out with these buttons:
Main radio function is active
go to next station on the radio station list
go to previous station on the radio station list
Fig. 12 Navigation
System: Return button
RETURN
RETURN
RETURN
Fig. 13 Navigation
System
Forward/reverse
button

|A2
|A1

General system operation19
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP If you would like to scroll in an active radio station list using the
Forward/Reverse button, it is not necessary to show the station list
in the Navigation System display.
If the radio memory list
page 61 is shown in the Navigation
System display, you can select a a station from the memory list by
pressing the Forward/Reverse button.
Main CD function is active
Pressing the button calls up the next CD track. If the button is
held down, fast forward is activated.
You can jump back to the previous track by pressing the button
within the first 10 seconds of play time for a track. After 10
s e c o n d s i t j um p s t o t h e s t a r t o f t h e t ra ck. I f t h e b ut to n is he l d d o w n ,
reverse is activated.
If you would like to scroll in an active CD track list using the
Forward/Reverse button or activate forward/reverse it is not neces-
sary to show the CD operating menu in the Navigation System
display.
Main MP3 function is active
Pressing the button c alls up the n e xt in the MP3 p layer. If the
button is held down, fast forward is activated.
You can jump back to the previous track by pressing the button
within the first 10 seconds of play time for a track. After 10
s e c o n d s i t j um p s t o t h e s t a r t o f t h e t ra ck. I f t h e b ut to n is he l d d o w n ,
reverse is activated.
If you would like to scroll in an active MP3 track list using the
Forward/Reverse button or activate forward/reverse it is not neces-
sary to show the MP3 operating menu in the Navigation System
display.
Adjusting volumeVolume can be adjusted by turning the ON/OFF button. The volume
setting will be stored automatically.
If the volume is too high when the radio is turned on, it will be
reduced automatically to a level set by the factory. If the volume is
too low when the radio is turned on, it will be increased automati-
cally to a level set by the factory.
Tips
Volume can also be adjusted using the buttons on the multi-func-
tion steering wheel*
page 21.

|
A2
|
A1

|
A2
|
A1
Fig. 14 Navigation
System ON/OFF knob -
adjusting volume

General system operation 20Home functionIf you activate the function button within a main function, the
system will automatically jump to the main menu of that main func-
tion.
In Navigation “Home function” depends on the route guidance
selected: If you have activated route guidance with stopovers, you
go to the menu for route planning by pressing the function button
again
page 139, fig.146. If you have activated route guidance
without stopovers
page 139, y o u g o t o t h e m a i n n a v i g a t i o n m e n u
(singe destination mode) by pressing the function button again.
History function
The system recalls the previous settings.When a function button is pressed, the system will switch to the
most recently accessed menu level for the specific main function.
This includes any sublevels that were opened. This excludes Setup
menus.
The history memory is erased when the system moves into standby
mode.
An example: You are currently on the Tuning radio menu and switch
to the navigation menu by pushing the button. If you press
the button at this time, you will not jump to the main radio
menu, but directly to the Tuning radio menu.
Start Navigation System ResetThe following process will restart your Audi Navigation
System and will allow complete functionality sytem to be
restored.
– Press the ON/OFF knob to switch the Navigation System
off.
– Press and hold the ON/OFF knob until the display reap-
pears and turns black.
– Release the ON/OFF knob as soon as the display has
turned black. A f t e r a f e w s e c o n d s , t h e N a v i g a t i o n S y s t e m
begins its restart, or you can switch it on manually

page 11.
NAV
FM

AM
Fig. 15 Navigation
System ON/OFF knob

Drives 48Removing CDs from the magazine– Turn the magazine over and hold it with the CD release
lever up
fig.49.
– Hold the release lever against the spring force.
– Press the C Ds o ut through the open ing in the back of the
magazine
fig.49.
– Take the CDs out of the magazine.
Note

Always keep your CDs in their original cases to protect them
from dirt, dust, scratches or other damage.


Never expose CDs to direct sunlight.
Tips
Do not let the CDs drop!TipsPrecautions with laser devicesLaser devices are categorized according to DIN IEC 76 (CO) 6/ VDE
0837 into safety classes 1 - 4.
The laser devices in your Audi conform to safety class 1.
The laser used in Class 1 is so low and so well shielded, no danger
exists with proper usage.
Tips
D o n o t o p e n t h e c a b i n e t . Th e u n i t d o e s n o t c o n t a i n a n y c o m p o n e n t s
that can be maintained by the user.
Fig. 49 Removing CDs
from the magazine

RADIO69
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Applies to vehicles: with Satellite Digital Audio Radio ServiceSatellite station list
The available stations are listed in the satellite main
menu.Fig. 69 Radio: Sirius Satellite Radio station list– Press the function button if another menu is
currently being displayed.
– Select the desired radio station in the main XM or Sirius
radio menu with the control knob.If you are not in the main satellite radio menu (XM or Sirius Radio)
after pressing the function button, you can change the frequency
band by pressing the Band control button
page 57 or by repeat-
edly pressing the function button page 16.Operating the Memory c o n t ro l b ut t o n d i s p l a y s t h e m e m o r y l i s t . Yo u
m a y s t o r e s t a t i o n s f r o m t h e F M , A M a n d S a t e l l i t e r a d i o ( X M o r S i r i u s )
bands
page 61.
The explanations for the sound settings start with section
page 92.Tips


The stations that are displayed in the station list can be filtered
a c c o r d in g to yo u r p e r s o n a l d e s i re s as to ty p e o f p ro g ra m
page 72.


If you operate the button in a submenu, the Satellite
radio main menu will be displayed.


The control button with the Tu n i n g function cannot be
selected.
FM
AM
FM

AM
RETURN

RADIO 72Applies to vehicles: with Satellite Digital Audio Radio ServiceCategory filter
You can make a preselection in the program catego-
ries.Fig. 73 Setup Radio: Category filterTurning on filter option
– Press the function button in the satellite radio
menu.
– Select Category filter.
–Under Category filter select the desired filter option and
press the control knob. A check

will appear after the
filter option, or– Select the filter option All categories and press the
control knob so that a check

appears after All
categories.
Turning off individual filter options
– Press the function button in the satellite radio
menu.
– Select Category filter.
–Under Category filter select individual filter options that
are not to be active any longer and press the control
knob. The check

after the filter option disappears.
Turning off all filters
– Press the function button in the satellite radio
menu.
–First select the filter option All categories and press the
control knob so that a check

appears after All
categories. A t the sam e tim e, a check

will appear after
each filter option.
– If you press the control knob again afterwards, the
checks

after all of the filter options disappear.
The stations that are displayed in the station list can be filtered
according to your personal des ire s as to type of program. The selec-
tion of program categories depends on what your provider offers.
SETUP
SETUPSETUP