turn AUDI A8 2010 D3 / 2.G RNS_E Navigation System Manual

Adjusting sound settings 92Adjusting sound settingsSetting basic sound characteristicsFig. 96 Sound: Setting the balance (example radio menu)Fig. 97 Sound: Balance adjustment (example radio menu)
– Press the control button for the Sound function from an
audio or Setup menu.
– Select the desired sound setting (e.g. Balance)
fig.96
with the control knob.
– R o t a t e t h e s p e c i f i c c o n t r o l k n o b i n t h e s o u n d a d j u s t m e n t
menu (e.g. Balance)
fig.97 to set the sound character-
istic to your liking.
– B y p r e s s i n g t h e c o n t r o l k n o b o r t h e b u t t o n , t h e
setting is imported and you leave the settings menu.The Display
fig.97 shows the degree of adjustment.
RETURN

Adjusting sound settings 94
TipsVehicles with a BOSE sound system in conjunction with
an AudioPilot do not have a DSP function. In this case your vehicle
is equipped with dynamic noise compensation
page 94.
Applies to vehicles: with BOSE sound system in conjunction with AudioPilotDynamic noise compensationVehicles with a BOSE sound system in conjunction with AudioPilot
are equipped with dynamic noise compensation.
Dynamic noise compensation automatically adjust music playback
so that the music is no t drowned out b y no ise . No matter what kind
of ambient noise you have in the vehicle, the music playback level
remains the same.
Dynamic noise compensation takes account of both temporary and
permanent ambient noise.
How does dynamic noise compensation work?
A microphone in the vehicle interior detects both the noise level of
the music playback and intrusive noises. The intrusive noises are
digitally analyzed and evaluated. The system simultaneously
ensures that the music playback level is increased by the frequen-
cie s affe cte d by intrusive noise so that music playback remains at a
constant level for good listening.
Tips
In the event of a malfunction in the AudioPilot system, a gong signal
sounds three times to alert you after the Navigation System is
turned on. Have the AudioPilot system inspected by a qualified
dealership.
Vo l u m e s e t t i n g sFig. 99 Display: Volume settings– Press the control button for the Sound function from an
audio or Setup menu.
– Select Vo lum e set tin g s.
– Select Navigation info.
– Rotate and press the control knob to set the desired
volume.When you adjust the volume for Navigation prompts, a test
announcement is made automatically. This test announcement is
made only if the navigation DVD is in the DVD navigation drive page 35.

Adjusting sound settings95
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Tips
If the volume is too high when the radio is turned on, it will be
reduced automatically to a level set at the factory. If the volume is
too low when the radio is turned on, it will be increased automati-
cally to a level set at the factory.

NAME (directory) 100Generating new entries in the directoryFig. 102 Directory: Enter name for a new entry
Fig. 103 Directory: Name entered, remaining data fields can be completed
– Press the function button
page 16 if another
menu is currently being displayed.
– Select New entry.
– Select Last name
fig.102 and enter a name using the
speller
page 30.
– Select OK in the speller to confirm your entry.
– Select additional data fields to enter the desired data

fig.103.F i r s t , a n a m e h a s t o b e e n t e r e d . A l l o t h e r d a t a f i e l d s a r e “ g r e y e d o u t ”
and cannot be selected
fig.102. After you have entered a name,
you can enter the remaining data.
By selecting a data field, a speller is automatically activated
page 30 which allows letters and numerals to be entered.
The entires in the directory are saved automatically.
W h e n y o u h a v e c r e a t e d a d i r e c t o r y c a r d a n d y o u p r e s s t h e
button, you can start the next entry.
NAME
RETURN

NAME (directory) 104
– Press the function button
page 16.
– Select an existing entry
page 101 o r c r e a t e a n e w e n t r y

page 100.
– Select as required Category private or business

page 103, fig.109.
– Select Navigation destination
page 103, fig.110.
– Enter the data for the navigation destination, or
– Select Copy from current position or Get from previous
dest. to import the destination data from one of the
previous navigation destinations.
– Select as required Display as top destination to display
the navigation destination in a destination entry menu

page 133.You can store two navigation destinations for one directory entry,
one destination for the business category and one destination for
the personal category.
If the Display as top destination function shows a check mark

after it, this function is active. These navigation destinations are
shown in the main navigation menu
page 133 under the menu
item Start route guidance.
When you have entered the navigation destination and you press
t h e b u t t o n , y o u a r e r e t u r n e d t o t h e d i r e c t o r y c a r d a n d c a n
enter additional data if you wish.
Through the directory (Name), you can call up all entries, without
and with stored navigation destination. You can open the directory
entries with navigation destination in the navigation menu via the control button with the Memory function and by selecting the Load
from directory
page 136 function.
Tips
If you have not inserted a navigation DVD into the Navigation DVD
drive
page 35, you cannot use the Navigation and Directory
functions.
NAME
RETURN

Navigation (NAV) 108Navigation (NAV)General safety precautionsThe driver is completely responsible for traffic safety
even when driving with the Navigation System active.Fig. 111 Display: WarningWhen you set your vehicle in motion and you press the
button, a warning message is shown in the display.
Lesen Sie die Warnmeldung aufmerksam und beachten Sie
die wichtigen Hinweise.
– Select Accept by pressing the control knob when you
have finished reading the warning message.
Be sure that you always have complete control of your vehicle in all
traffic situations when using navigation.
WARNING


Always obey traffic laws, signs and signals, they take prece-
dence over navigation system recommendations.


Always concentrate on driving and pay attention to the road,
listen to the voice prompts and never let yourself be distracted by
the map display on the screen
page 9.


Always remember that data on the Navigation DVD can differ
from the actual situation because of insufficient data or because
the road or traffic routing has changed since the area was
mapped. Do a “reality check” and ignore the navigation system
recommendation if necessary.


Always remember that even if one-way streets, pedestrian
zones, etc. are stored on the Navigation DVD, traffic routing is
subject to constant change. Traffic signals, turning lanes or prohi-
bitions, stop and yield signs, no parking and similar zones as well
as narrow lanes are not covered by the navigation system.


Always adjust your speed to road, traffic and weather condi-
tions and visibility. Never let information about the road ahead
cause you to drive too fast for conditions, for example in fog.


The volume setting should be selected to ensure that outside
signals, such as police and fire truck sirens, are always audible -
danger of accident!
NAV

Navigation (NAV)109
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Tips


The Navigation System is designed to provide you with
suggested routes in locating addresses, destinations and other
points of interest.


Changes in street names, construction zones, traffic flow, points
of interest or other road system changes are beyond the control of
Audi of America, Inc.


Complete, detailed mapping of lanes, roads, streets, toll roads,
highways, etc., is not possible, therefore you may encounter
discrepancies between the mapping and your actual location.
IntroductionGeneralFig. 112 Display: Example of navigation mapThe Audi Navigation System can help you to reach your destination
without spending a lot of time studying maps.
During the trip you will receive information on vehicle location,
in structions for turning (directio n and dis tance to turn-off), p resen t
distance to destination and estimated time of arrival at destination
in the Navigation System display
fig.112 and in the instrument
cluster display
page 111, fig.114. In addition you will receive
navigation prompts in the form of a spoken announcement
page 112.
There are two possibilities for guide destination:

Route without stopover (Single destination mode)

Navigation (NAV) 110

Route with stopover (Route plan)
Route without stopover (Single destination mode)
In single destination mode you can drive directly to a destination
page 119.
If you enter a direct destination and start guidance, you are given
the option of up to three different routes
page 130.
Route with stopover (Route plan)
In this mode, you can choose up to three stopovers and one final
destination
page 139.
For example, while on your way to your final destination, you could
have three stopovers, such as: the nearest gasoline station, then a
restaurant and after that a point of interest to visit
page 121.
WARNING
Follow the traffic laws for the area in which you are driving. If
driving instructions run contrary to traffic laws, the traffic laws
always take precedent.
Tips
However, the system will not provide you with any information
about the meaning of traffic signs and signals!
How does the Navigation System work?
The Navigation System works with the help of satel-
lites (GPS).To determine current vehicle position, distance sensors, gyroscopes
and satellite signals are analyzed. The signals are transmitted by
GPS satellites. The acronym GPS stands for “Global Positioning
System”.
The recorded information is transferred to the navigation system
a n d t h e n c o m p a re d w i t h t h e m a p m a t e r i a l s to re d o n t h e N a v i g a t io n
DVD. In this way, guidance to your destination can be calculated
precisely.
To c a l c u l a t e g u i d a n c e t o y o u r d e s t i n a t i o n , t h e n a v i g a t i o n D V D h a s t o
be inserted into the navigation drive. The drive for the Navigation
System is located behind the system display
page 35.
When the navigation DVD is inserted, the system starts automati-
cally and navigation destinations can be entered page 117.
Five differe nt languages (German, E nglish, French, Spanish, Italian)
are availabe on the navigation DVD for the audible navigation
prompts. You can change the language for the audible navigation
voice messages using the Menu language function in Setup
page 170.Tips


Snow and other objects on the GPS antenna or screening by
trees and large buildings can interfere with satellite reception and
m a ke i t m o re d i ffe re n t to d e t e rm i n e v e h i c l e l o c a t i o n . I f s e v e ra l s a t e l -
lites are turned off or disabled, this may result in interference with
GPS reception and make it more difficult to determine vehicle loca-
tion.

Navigation (NAV)113
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP map
page 143 and in Setup Navigation
page 151 to d i s p l a y th e
map.
If you are navigating without stopovers, you have the option of
selecting from up to three routes, in addition to detailed route infor-
mation
page 130.
If you are n avigatin g with stopovers, you are shown the entire route
with all stopovers and detailed information in an overview
page 132.
You can also use the map as presented in the Navigation System
display to enter a destination
page 128.
Applies to vehicles: with display of the instrument clusterVisual presentation in the instrument cluster display
A s s o o n a s y o u h a v e e n t e r e d a r o u t e i n t o t h e N a v i g a t i o n S y s t e m a n d
begun navigating, guidance to your destination will also be
displayed in the instrument cluster display.
Fig. 116 Instrument
cluster display:
Example of route guid-
ance presentation
Display
Shor t descriptionEstimated time of arrival at destination or current
stopoverDistance remaining to next turn pointDirectional arrowLocation-dependent display of freeway, highway
and street names
An arrow before the display identifies the name of
the street onto which you should turn.Total kilometers to destination or current stopover
Fig. 117 Instrument
cluster display:
Example of route guid-
ance presentation
(turn off)
A1A2A3A4A5

Navigation (NAV) 114When the turn-off is immediately ahead, the arrow points in the
direction in which you should turn. In addition, the name of the
street is shown under the arrow. A bar graph
page 113, f i g .1 1 7 o n
the right in the display takes you precisely to the turn-off point.
If it is necessary to make a lane change before the turn off, you are
warned in plenty of time about this lane change before the turn-off
arrow by a second arrow
page 111, fig.114.
Tips
With active guidance, you can switch to the trip computer display*
by pressing the trip computer reset button*. Pushing the trip
c o mp ut e r re s e t b ut to n * a g a in r e t ur n s y o u to g u i d a n c e . Yo u c a n fin d
detailed information about the trip computer* in the Owner's
Manual.
Applies to vehicles: with color instrument cluster display:Visual presentation in the instrument cluster display
Change of direction arrowBar graph (countdown): bars decreasing in size indi-
cate how the distance to the immediate turn-off
point is decreasing; the bar graph is not shown until
a change of direction arrow is displayed.If there is another side street before the turn-off
point which is n ot pa r t of current guidan ce , this side
street is represented by a side-street symbol in the
instrument cluster display.
Display
Short description
A6A7A8
Fig. 118 Instrument
cluster display:
Example of route guid-
ance presentationFig. 119 Instrument
cluster display:
Example of route guid-
ance presentation
(turn off)