lock AUDI A8 2018 Owner's Manual

Opening and clo sin g
@ Tips
- The panorama roof will on ly open down to
·4°F (·20°).
- To prevent both roof segments from co llid ·
ing with one another, you do not need to
- tilt the rear roof segment if the front roof
segment is already open.
- close the front roof segment if the rear
roof segment is already tilted.
Opening/closing the sunshade
Applies to: vehicles w ith panorama glass roof
© Front sunshade
.,. To open the sunshade completely, slide the G;J
button back to the second level ¢ page 39,
fig. 39 .
.,. T o close the sunshade comp lete ly, sl ide the G;J
swi tch forward briefly to the second level.
.. To se lect a pa rtially open position, slide the l:c.i.l
button to the first level until the sunshade has
reached the desired position.
© Rear sunshade
.,. T o open the sunshade comp lete ly, press the~
button in the rear door briefly down to the sec­
ond leve l¢
page 39, fig . 40.
.. To close the sunshade comp lete ly, pull the ~
button up to the second level ¢,& .
.,. To se lect a partially open position, press/pull
the
G;J button to the f irst level until the desired
pos ition is reached. Or
.. To ope rate the sunshade from the cockpit,
press the
I REAR MODEi b utton 9 page 39,
fig. 39.
You can now open/close the rear su n­
shade using
th e~ button in the headliner.
A WARNING
Be careful when closing the panorama g lass
roof
-otherwise serious injury could result!
Switch off the ignition when exiting the vehi­
cle.
40
Roof segments/sunshade emergency
closing
Applies to: vehicles with panorama glass roof
If the roof segment or s unshade detects an ob­
j ect in its path when it is closing, it will open
again automatically . In this case, you can then
close it w ith the power emergency closing func ­
tion.
.. Withi n five seconds after the roof segment or
sunshade opens automatically, pull t he switch
until it closes.
Valet parking function
Applies to: vehicles with valet parking function
The valet parking function protects the luggage
compartment from unauthorized access.
F ig. 4 1 Glove compartment: valet parking functio n button
You can switch the va let parking f unction on
whe n someo ne else is parking your vehicle. When
the function is switched on, the vehicle can be
driven, locked and unlocked using the master
key, but access to the luggage compartment is
not permitted.
.. Remove the integrated mechanical key
Qpoge 29 .
.. Open the glove compartment.
.,. Press the !VALET I button to switch the valet
parking function on. The LED in the button
t u rns on.
.,. Lock the glove compartment with the mechani­
cal key .
.,. O nl y give the remote cont ro l key to the se rvice
personnel parking your car and keep the
re-
moved mechanical key wit h you. ..,.

u. co .... N
" N .... 0 0 :c ' on the position of vehicles driving ahead and on­
coming vehicles, the vehicle speed and other en­
vironmenta l and traffic conditions.
Activating high beam assistant
Requirement: the light switch must be set to the
AUTO position and the high beam assistant must
be switched on in the Infotainment system
~ page 45 .
.,. To activate the high beam assistant , tap the
l ever forward @. T he
II ind icator light ap­
pears in the instrument cluster display and the
high beam headlights are switched on/off auto­
matically. The
ii indicator light also turns on if
the high beams are switched on.
Switching the high beams on/off manually
If the high beams did not switch on/off automat­
ica lly as expected, you may switch them on or off
manually instead:
.,. To switch the high beams on manually, tap the
lever forward @. T he
ii indicator light turns
on .
.,. To switch the hig h beams off manua lly, pull the
lever
back @. The high beam assistant is deac­
t ivated.
Operating the headlight flasher
.,. T o operate the headlight flasher when the high
beam assistant is activated and high beams are
switched off, pull the lever
back @. The high
beam assistant rema ins active.
Messages in the instrument cluster display
Headlight assist: System fault
Drive to an authorized Aud i dea ler or authorized
Audi Service Fac ility immediately to have the
malfunction corrected. You can still switch the
high beams on or off manually.
Headlight assist: Unavailable No camera view
The camera view is blocked, for example by a
sticker or debris .
The sensor is located between the interior rear­
view mirror and the windshield. Do not place any
stickers in this area on the windshield.
Lights and Vision
A WARNING
--
High beam assistant is only intended to assist
the driver. The driver is still respons ible for
controlling the headlights and switching
them manually depend ing on light and visibil­
it y conditions. It may be necessary to operate
them manually in situations such as:
- I n adverse weather conditions such as fog,
heavy rain, blowing snow or spraying water.
- On roads where oncom ing traffic may be
pa rtiall y obscured, such as expressways.
- When there are road users that do not have
sufficient lighting, such as b icyclers or
vehicles with dirty tail lamps.
- I n tight curves and on steep hills.
- In poorly lit areas.
- With strong reflectors, such as signs.
- If the area of the w indshield near the sensor
is fogged over, dirty, icy or covered with a
sticker .
Adjusting the exterior lighting
The functions are adjusted in the Infotainment
system.
.,. Select: I CAR ! function button > Car systems
control button > Vehicle settings > Exterior
lighting .
Automatic headlights
You can adjust the following sett ings in the Au­
tomatic headlights
menu:
Headlights activation time -you can adjust if the
headlights switch on
Early, Medium or Late ac­
cording to the sensitivity of the light sensor.
Auto-dimming high beams* -you can switch the
high beam assistant*
On and Off .
Daytime running lights*
USA models :
the daytime running lights can be
switched on/off. Select
On or Off.
Canada models:
this function cannot be switched
off. They activate automatically each time the ig -
nition is switched on .
IIJ>-
45

Lights and Vision
Coming home, Leaving home
The coming home function illuminates the area
outside the vehicle when you turn the ignition off
and open the driver's door. To turn the function
on, select
Lights when leaving car > On.
The leaving home illuminates the area outside
the vehicle when you unlock the vehicle. To turn
the function on, select
Lights when unlocking
car> On.
The coming home and leaving home functions
only operate when it is dark and the light switch
is in the
AUTO position.
Emergency flashers
~ ~--·I
~ :cc-~--t
Fig. 46 Center console: emergency flasher button
The emergency flashers makes other drivers
aware of your vehicle in dangerous situations.
• Press the ~ button to switch the emergency
flashers on or off.
You can indicate a lane change or a turn when the
emergency flashers are switched on by using the
turn signal lever. The emergency flashers stop
temporarily.
The emergency flashers also work when the igni­
tion is turned off.
46
Interior lighting
Front and rear interior lighting
Fig. 47 Front headliner: interio r light ing contro ls
Fig. 48 Rear headl iner : Reading light
Press the corresponding button ¢ fig. 47:
~ -Interior lighting on/off
[!J. Door contact switch on/off . The interior light­
ing is controlled automatically.
~-Reading lights on/off
~* -Switch the rear reading lights on/off from
the cockpit.
I REAR MODEi* -Switching the rear reading lights
on/off from the cockpit: press the
I REAR MODE !
button and then the corresponding button~ in
the cockpit.
· Interior lighting
App lies to: vehicles wit h interior light ing
You can select a color profile and brightness for
the interior lighting in various areas of the vehi- cle, called zones.
ll>

Lights and Vision
Q/P -Adjusting the left/right exterior mirror.
Move the knob in the desired direction.
4lll -Heats the mirror glass depending on the out­
side temperature.
8 - Folds the exterior mirrors* . In the Infotain­
ment system, you can select if the mirrors fold in
automatically when you lock the vehicle
¢page 32.
Front passenger's exterior mirror tilt
function*
To help you see the curb when back ing into a
parking space, the surface of the mirror tilts
slightly. For this to happen, the knob must be in
the position for the front passenger's exterior mirror.
You can adjust the tilted mirror surface by turn­
ing the knob in the desired direction. When you
move out of reverse and into another gear, the
new mirror position is stored and assigned to the
key you are using.
The mirror goes back into its original position
once you drive forward faster than 9 mph
(15 km/h) or turn the ignition off .
A WARNING
Curved mirror surfaces (aspheric or convex*)
enlarge the field of vision. However, they
make objects in the mirror appear smaller
and farther away . You may estimate incor­
rectly when you use these mirrors to gauge
your distance from the vehicles behind you
when changing lanes, which increases the risk
of an accident.
(D Note
- If the mirror housing was moved by outs ide
forces (such as an impact when maneuver­
in g), you must use the power folding func­
tion to fold the mirror all the way out. The
mirror housing must not be moved back in-
to place by hand because this would impair
the function of the m irror mechanism.
-If you wash the vehicle in an automatic car
wash, you must fold the exterior mirrors in
to reduce the risk of damage to the mirrors.
48
Never fold power fold ing exterior mirrors by
hand . Only fold them in and out using the
power controls.
(D Tips
-If the power adjusting function malfunc­
tions, the glass in both mirrors can be ad­
justed by pressing on the edge of it by hand.
-The exterior mirror settings are stored with
the memory function* ¢
page 59.
Dimming the mirror
Fig. 51 Automat ic d imming rearv iew m irro r
0
~ 0 :i: ~ m
.. To dim the interior rearview mirror and both ex­
terior mirrors*, press the button @. The LED @
turns on. The interior rearview mirror and exte­
rior mirrors* dim automatically when light
shines on them, for example from headlights
on a vehicle behind you.
A WARNING
Electrolyte fluid can leak out from broken
mirror glass. This liquid can irritate the skin,
eyes and respiratory system. If there is con­
tact with the fluid, flush immediately with
p lenty of water . Consult a physician if neces­
sary.
-
-Repeated or long-term exposure to electro­
lyte fluid can lead to irritation of the air­
ways, especially in people with asthma or
other respiratory conditions. Take deep
breaths immediately after leaving the vehi­
cle or, if this is not possible, open all of the
doors and w indows as wide as possible.
-If electrolyte fluid enters the eyes, flush
them thoroughly with a large amount of

Lights and Vision
,.. Switch the windshield wipers off (position@
~page 50, fig. 56).
,.. Select: the ICARI function button > Car systems
control button > Service & control> Wiper
change position. > On.
Removing the wiper blade
,.. Fold the windshield wiper arm away from the
windshield.
,.. Press the locking knob@ c:> fig. 57 on the wiper
blade . Hold the wiper blade firmly.
,.. Remove the wiper blade in the direction of the
arrow.
Installing the wiper blade
,.. Insert the new wiper blade into the mount on
the wiper arm @until it clicks into place.
,.. Place the wiper arm back on the windshield.
,.. Turn the service position off.
.,&. WARNING
For safety reasons, the windshield wiper
blades should be replaced once or twice each
year.
@ Note
- The windshield wiper blades must only be
folded away when in the service position! Otherwise, you risk damaging the paint on
the hood or the windshield wiper motor.
- You should not move your vehicle or press
the windshield wiper lever when the wiper
arms are folded away from the windshield.
The windshield wipers would move back in­
to their original position and could damage
the hood and windshield.
- You can also use the service position, for ex­
ample, if you want to protect the windshield
from icing by using a cover.
- You cannot activate the service position
when the hood is open.
52
Digital compass
Switching the compass on and off
Applies to: vehicles with digital compass
Fig. 58 Rearview mirror : d ig ital compass activated
,.. To turn the compass in the mirror on or off,
press the button @ until the compass display
in the mirror appears or disappears.
The digital compass only works when the ignition is turned on. The directions are indicated with ab­
breviations:
N (north), NE (northeast), E (east),
SE (southeast), S (south), SW (southwest), W
(west),
NW (northwest) .
(D Tips
To prevent inaccurate compass readings, do
not bring any remote controls, electrical devi­
ces or metallic objects near the mirror.

lL t:0 ....
"' " "' .... 0 0 :c ' .,. To fo ld t he leg suppo rt out/ in, press and ho ld
the left/right button @ unti l the leg support
reaches the desired position.
.,. To angle the leg support so that it is more up­
right/more recl ined or to move it forward/back,
adjusting the front passenger's seat according ­
ly .
Adjust ing the f ront pa ssenge r's seat
.,. Make s ure that the front passenger's seat ad­
justment is switched on in the Infotainment system
c:> page 58.
.,. To activate the front passenger's seat adjust­
ment, press the button ®·
.,. To adjust the front passenger's seat forward/
back, press the butto n© forward/back.
.,. To move the front p assenger's seat up/down,
press the button © upward/downwa rd.
.,. To adjust the front passenger's seat back rest so
that is more upright/more reclined, press the
button ®forward/back.
.,. Applies to vehicles with reclining seat*: to ad­
just the reclining/standard seat position, press and hold the button
@ /(D until the front pas ­
senger's seat reaches its end posit ion .
,&. WARNING
-The power seats can also be adjusted w hen
the igni tion is switched
o ff. For this reason,
children should never be left unattended in
the vehicle beca use they cou ld be injured.
-Be careful whe n adj usting the sea t. Unsu­
pervised or c areless seat adjustment can
pinch fingers or hands ca using injur ies .
-Applies to vehicles with reclining seat* :
-Do not use the front passenger's seat for
seating when it is in the recl ining posit ion.
This inc reases the risk of ser ious injury or
death.
-Never adjust the reclining position when
the front passenger's seat is occupied .
This inc reases the risk of injury.
-Do not tilt the display if the driver's v iew
of the right exterio r mirror w ill be ob­
s tructed .
-Make sure the area between the leg sup­
port and the front passenger's seat back-
S eats and storag e
rest is clear before fo ld ing the leg support
in so that you are not p inched.
(D Tips
-T he massage function switches off auto­
matically after approximate ly 10 minutes .
-If you cannot adjust the reclining seat* or
the front passenger's seat from the rear, it
is possib le that:
-the front passenger's seat memory func­
tion is switched
off c:> page 59, or
-the child safety lock is switched on (the ~
button c:> page 3 7 or the r ight t button
c:> page 37 is tu rned on in the d river's
door), or
-the front passenger seat adj ustment is
switched
off in the Infota inment system
c:>page 58 .
Massage function remote control
Appl ies to: vehicles wit h reclinin g seat an d massa ge function
Fig . 66 Remote control: recli ning seat massage funct ions
T he remote controls are located in the rear cen­
te r console
c:> page 62, fig. 72 . The massage
func tion is only ava ilable when the igni tion is
swi tched on.
.,. To open the remote co ntro l compartment,
press the left b utton and fold the center arm­
rest upwa rd.
.,. To adjus t the massage type, press the app ropr i­
ate
button @-@ . The LED in the button turns
on.
.,. To adjust the speed/i ntens ity, tu rn the thumb ­
wheel@I® . The LEDs indicate the speed/in­
tensity.
.,. Press the selected massage type again to
sw itch the massage function
off .
57

Seats and stor age
Massage types
@ -Wave
@-Pulsating
© - Stretch
@-Lumbar
(D Tips
-The massage function switches off a uto­
matically after approx imately 10 minutes.
- If you activate a massage type again, the
l ast selected intensity and speed w ill be
se­
lected.
Comfort settings
A pp lies to: ve hicles w ith comfo rt seats in t he rea r
You con also apply several settings for the rear
using the Infotainment system in the cockpit .
.. Select in the MMI: I CAR j function button> Car
s y stem s
control but ton > Vehicle s etting s>
Seats > Rea r seat s.
Approa ch norma l position
-with this funct ion,
the o ute r rear seats and the front passenger's
seat are moved to the facto ry setting.
Ea sy se at entry -the Easy s eat entry makes it
possible to enter and exit the rea r seats comfort­
ab ly. If the function is sw itched on, the rear seat
automatically moves all the way back when the
corresponding door is opened.
Pa ss e nge r seat adju stment * -if the funct ion is
sw itched on in the Infotainment system, the
front p assenger's seat can also be adjusted from
the rear seat using the
¢ page 56, fig. 64 but ­
tons.
The front passenger's seat cannot be adjusted, if
-the front passenger's seat memory function is
switched off
c:> page 59 .
-the~ button turns on in the driver's door
c:> poge 37 .
-The r ight l±l button turns on in vehicles with
power chi ld safety locks*
c:> poge 37 .
58
Head restraints
Adjusting the head restraints
Fig. 67 Comfort head restraint : adjusting the s ide bolsters
Fig. 68 Outer rea r seat : adjust ing the head restrain t
Adjust the head restraints so the upper edge is as
even as possible w ith the top of your head. If that
i s not possib le, try to adjust as close to th is posi­
t ion as poss ible.
Adjusting the front head restraints
.. To adjust the he ight of the front head re­
straints, pull/press the button ©
c:> page 54,
fig . 60
up/down.
.. To adjust the side bolste rs*, push the s ide bo l­
s t ers in to the desired position
c:> fig . 67.
.. Vehicles with reclini ng seat*: grab the head re ­
s t rai nt a t the sides with both hands and s lide
the head restraint up/down unti l it clic ks into
place.
Adjusting the rear head restraints
The center head rest raint in the rear is not ad­
just able. When passengers r ide in the outer rea r
seats, ra ise these head restraints up to the top
position
c:> ,&. . .,._

u. co .... N
" N .... 0 0 :c ' ~ To move t he head restraint up, ho ld it at the
sides with both hands and slide it upward unti l
you fee l it click into place.
~ To move the head restraint down, press the
button (small
arrow)¢ fig. 68 and slide the
head restraint downward.
A WARNING
Always read and follow the applicab le wa rn­
ings
¢page 211.
Memory function
Description
Applies to: vehicles with memory function
-
Using the memory function, you can quickly and
eas ily store a personal seat profile for the driver
and front passenger as well as for the outer rear
seats* and recall the settings. The memory func­
tion is controlled us ing the remote control key
and the memory buttons in the drive r's/front
passenger's door and in the rea r doo rs*.
The driver's seat profile is stored again and as­
signed to the remote control key each time the
ve hicle is locked. When you open the door, the
seat profi le is automat ica lly reca lled. If two pea-
Remote control
key
Driver
Seat X
Hea d rest raint X
Steering wheel* X
Sa fety belt* X
Both exterior mirrors* X
Remote control key
Applies to: vehicles with memory function
The functio n must be switched on so that the
d river's seat p rofile will be assig ned to t he re ­
mote cont rol key w hen locking the vehicle .
~ Select: the ICARI function button > Car systems
contro l bu tton > Vehicl e setting s > Driver' s
s eat > Remo te control ke y > On.
Seat s and sto rag e
(D Tips
To prevent the head restraints from running
i nto the headline, they are automatically
moved forward or upward when the seat is
adjusted.
ple use the vehicle, it is recommended that each
person always uses the ir "own" remote control
key.
T wo seat profiles can be stored using the memo ­
ry buttons in the driver's/front passenger's door
respectively, and one seat profile can be stored in
each of the rear doors*. Once they are stored,
these seat profiles can be selected at any time.
The following sett ings are stored:
Memory button
Driver Front passenger Outer rear seats*
X X X
X X
X X X
X
(D Tips
If yo u do not wish to have t he seat profi le for
another dr iver assigned to the remote cont rol
key, sw itch the memory function
off in the In­
fotai nment system or using the
!O FF ! button
¢page 60.
59

lL t:0 ....
"' ......
"' .... 0 0 :c ' Folding table in the center console
Applies to: ve hicles with fold ing tab le in the center console
The folding table is stored in the front area of
the center console.
Fi g. 73 Rea r center console : ope ning the folding tab le
F ig. 74 Rea r ce nter console : fold ing tab le in clined pos ition
Opening
"" Pull the handle @towa rd the rear r=;, fig. 73.
The folding table extends out partially by i tself
¢ &, .
... Pull the folding table up until it locks into place
® ·
... Fold the tabletop back and down ©-
Storing
... Release the tabletop @to fold it back .
... You can now move the folding table vertica lly
back into its original position.
.&_ WARNING
- Do not open the folding table wh ile driving.
Open ing the folding table wh ile driving in­
creases the risk of injury in the event of a
co llision or sudden brak ing.
- To reduce the risk of pinch ing, open and
close the fo ld ing table carefully and in a
contro lled manner.
S eats and storag e
Storage
Cup holders
Fig. 75 Cente r conso le : front cup holders
F ig. 76 Section o f the rear bench seat: cup hol der in rear
center console
Front cup holders
"" Tap on the cove r to open the cup holders
r=;, fig. 75.
Cup holde rs in the rear center console
.. Tap on the front strip to open the cup holders.
• Set your beve rage in the holder .
• To close the cup holder , fo ld the cover back un-
til it clicks into place .
In veh icles with a full-length center console in
the rear, the cup holder is located at @
¢page 62, fig. 72 .
.&_ WARNING
-
-Do not put any hot beverages in the cup
holder while t he vehi cle is moving . Hot bev ­
erages could spill, which can cause injury.
- Do not use any breakab le beverage contain­
ers (for example, made out of g lass or por­
celain). Yo u could be injured by them in the
event of an accident .
...,
63

Seats and storage
(D Note
Beverage containers in the cup holders should
always have a lid. If not, beverages could spill
and cause damage to vehicle equipment, such
electronics or seat covers.
Cooled glove compartment
The cooled glove compartment only functions
when the A/C system is switched on.
Fig. 77 Glove compar tment: switching cooling mode on/
off
.. Turn the knob @counter-clockwise to switch
the cooling on. The symbols on the knob indi­
cate the correct position.
.. Turn the knob @clockwise to switch the cool-
ing off .
The glove compartment cooling mode only func­
tions when the vehicle A/C system is switched on.
If the heating is switched on, switching the glove
compartment cooling mode off is recommended.
A WARNING
-
Always leave the lid on the glove compart­
ment cover closed while driving to reduce the
risk of injury.
(D Tips
The glove compartment can be locked using
the mechanical key.
Additional storage compartments
You will find a range of storage compartments
and hold ers at different locations in the vehicle.
- Compartments in the doors
64
- Net in the front passenger footwell
- Glasses holder in the headliner (near the rear-
view mirror)
- Storage compartments under the center arm­
rest
- Compartments* on the backrests of the front
seats
- Garment hooks above the rear doors
- Compartment behind the rear center armrest
(on vehicles without a pass-through* or refrig­
erator*)
- Cell phone holder* in the right rear door
- Bag hooks* in the luggage compartment
A WARNING
-When driving, do not leave any hard objects
on the rear window shelf or allow your pet
to sit on the shelf. They could become a haz­
ard for vehicle occupants in the event of
sudden braking or a crash.
- Any articles of clothing that you have hung
up must not interfere with the driver's view .
The coat hooks are designed only for light­
weight clothing. Never hang any clothing
with hard, pointed or heavy objects in the
pockets on the coat hooks. During sudden
braking or in an accident
-especially if the
airbag is deployed
-these objects could in­
jure any passengers inside the vehicle .
- To reduce the risk of personal injury in an
accident or sudden stop, always keep the
glove compartment closed while driving.
- Read and follow all WARNINGS
~ page 245, Important safety instructions
on the side airbag system.
- Hang clothes in such a way that they do not
impair the driver's vision.
- The coat hooks must only be used for light­
weight clothing. Do not leave any heavy or
sharp edged objects in the pockets which
may interfere with the side curtain airbag
deployment and can cause personal injury in
a crash.
- Do not use coat hangers for hanging cloth­
ing on the coat hooks as this can interfere
with proper deployment of the side curtain
airbags in an accident.