fuel AUDI Q3 2017 Owner´s Manual

00
00
......
"' ,-...
"' ...... 0 0 :::,
00
S afe ty belt s . . . . . . . . . . . . . . . . . . . . . . 109
General information . . . . . . . . . . . . . . . . . 109
Why use safety belts? . . . . . . . . . . . . . . . . 110
Safety belts ........................ 112
Belt tensioners . . . . . . . . . . . . . . . . . . . . . . 115
Airb ag sy stem . . . . . . . . . . . . . . . . . . . . 11 7
Important information . . . . . . . . . . . . . . . 117
Front a irbags . . . . . . . . . . . . . . . . . . . . . . . 121
M on itor ing the Advanced Airbag System . 127
Side airbags . . . . . . . . . . . . . . . . . . . . . . . . 131
S ide curtai n airbags . . . . . . . . . . . . . . . . . . 134
Ch ild safety . . . . . . . . . . . . . . . . . . . . . . 137
I mpor tant info rmation . . . . . . . . . . . . . . . 137
C hi ld se ats . . . . . . . . . . . . . . . . . . . . . . . . . 14 3
Secur ing c hild seats . . . . . . . . . . . . . . . . . . 14 7
L ATCH system ( lowe r anchorages and
tethers for chi ldren) . . . . . . . . . . . . . . . . . 150
Additional information . . . . . . . . . . . . . . . 154
Maintenance and Care . . . . . . . . . . . 155
Checking and Filling . . . . . . . . . . . . . 155
Gasoline . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Refueling . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Cata lytic converter . . . . . . . . . . . . . . . . . . . 158
Eng ine compartment . . . . . . . . . . . . . . . . . 159
E ng ine oil . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Cooling system . . . . . . . . . . . . . . . . . . . . . . 166
B ra ke flu id . . . . . . . . . . . . . . . . . . . . . . . . . 168
B at tery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
W indshield was her system . . . . . . . . . . . . 169
Service inte rval display . . . . . . . . . . . . . . . 170
Wheel s ... .. .. ... ..... ... .. .. .... . 171
Wheels and Tires . .. ..... ... .. .. .... . 171
Tire press ure monitoring system 188
Care and cle aning . . . . . . . . . . . . . . . . 191
General information . . . . . . . . . . . . . . . . . 19 1
Ca r washes ... .. ... . .... ... .. .. .. .. . 191
C leaning and care information . . . . . . . . . 192
Placing your veh icle out of service . . . . . . 196
Troubleshooting . . . . . . . . . . . . . . . . . 197
Emergency assistance . . . . . . . . . . . 197
General information . . . . . . . . . . . . . . . . . 197
Equipment . . . . . . . . . . . . . . . . . . . . . . . . . 197
Table of contents
Replacing wheels . . . . . . . . . . . . . . . . . . . 198
Spare tire . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Fuses and bulbs . . . . . . . . . . . . . . . . . . 205
E lectrica l fuses . . . . . . . . . . . . . . . . . . . . . . 205
B ul bs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Eme rgency s ituation s . . . . . . . . . . . . 209
Genera l . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Start ing by p ush ing or tow ing . . . . . . . . . . 209
Start ing with jumper cables . . . . . . . . . . . 209
U se of jumper cables .. .. .. .. .. .. .. .. . 210
Tow ingwithatowt ruck . .......... ... 211
Raising the vehicle . . . . . . . . . . . . . . . . . . . 213
Accessories and Technical Data . 215
Technic al d ata . . . . . . . . . . . . . . . . . . . . 215
Vehicle spec ificat ions . . . . . . . . . . . . . . . . 215
Weig hts . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Notes abo ut te chnical da ta . . . . . . . . . . . . 216
D imens ions. ... .. .. .... .. .... ... .. .. 2 16
Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Gasoli ne engines . . . . . . . . . . . . . . . . . . . . 217
Consumer informat ion . . . . . . . . . . 218
War ranty coverages . . . . . . . . . . . . . . . . . . 218
Operating you r vehicle outside the U.S.A.
or Canada . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Audi Service Repair Manuals and
Literat ure . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Maintenance ...... .... ........... ... 218
Accessor ies and techn ica l changes . . . . . . 220
De claration of Comp liance,
T elecomm unica tions and Ele ctr onic
Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Index ............................. 222
3

Instruments and indicator lights
Instruments and indicator Lights
Instruments
Instrument cluster overview
The instrument cluster is the central information center for the driver.
Fig. 3 Instrument cluster overv iew
(D ISETI button .... ........... .. .
Tachometer .... .. .. ..... .... .
Engine coolant temperature gauge 9
9
8
@
®
©
®
Turn signal ind
icator lights ..... . 36
Display with :
- Indicator lights
- Driver information system
@ Speedometer
0
®
Fuel level .. .... ........... .. .
Trip odometer reset button
@ Tips
10
19
9
10
The instrument illumination for the needles
and dials turns on when the ignition is turned
on and the lights are turned off. The illumina­
tion for the gauges reduces automat ica lly and
eventually turns off as brightness outside in­
creases . This function reminds the driver to
turn the low beams on at the appropriate
time.
Coolant temperature indicator
The coolant temperature indicator @ c:::> page 8,
fig. 3
only operates when the ignition is switched
8
"'
"' N
0
;::) a,
"'
on. To prevent engine damage, please observe
the following notes about the temperature rang­
es.
Cold range
If the needle is at the bottom of the gauge, the
engine has not reached operating temperature
yet. Avoid high eng ine speeds, full accelerating
and heavy engine loads.
Normal range
The engine has reached operating temperature
when the needle moves into the center of the
gauge under norma l driving condit ions. The nee­
dle may move farther to the right on the gauge
with heavier engine load at hig h outside temper ­
atu res . This is no cause for concern as long as the
• indicator light in the instrument cluster does
not turn on.
If the needle is far over on the r ight side of the
gauge and the. indicator light turns o n in the
i nst rument cluster, then the coolant tempera­
ture is too high
c:::>page 13.

00
00
......
"' ,....
"' ...... 0 0 :::,
00
CD Note
- Auxiliary headlights and other accessories in
front of the cooling-air intake impair the
cooling effect of the coolant. This increases
the risk of the engine overheating during
high outside temperatures and heavy en-
gine load.
- The front spoiler also helps to distribute
cooling air correctly wh ile driving. If the
spo iler is damaged, the cooling effect will
be impai red and the risk of the engine over­
heating will increase. See an authorized
A udi dealer or authori zed Aud i Service Fa­
cility for assistance .
Tachometer
The tachometer displays the engine speed in rev ­
olutions per minute
(RPM).
You shou ld shift to the next lowest gear when
the eng ine speed is be low 1,500 RPM. The beg in­
ning of the red zone in the tachometer indicates
the maximum permissible engine speed for all
gears once the engine has been broken in and
when it is warmed up to operating temperature.
Before reaching this zone, you should sh ift into
the next highest gear, select the D selector lever position, or remove your foot from the accelera­
tor pedal.
CD Note
The needle in the tachometer @
Q page 8,
fig. 3 may only be in the red zone of the
gauge for a short t ime or the engine could be
damaged. The location where the red zone
begins va ries depend ing on the eng ine.
@) For the sake of the environment
Upshifting early helps you to save fuel and re­
duce operating noise.
Fuel level
The fuel leve l ind icator only ope rates when the
i gnit io n is switched on. The
tD Qpage 15
turns on if the reserve quant ity of fuel is reac hed.
In strum ents an d ind ic a to r ligh ts
The fue l tank capacity of your vehicle is listed in
the Techni cal Data section
Q page 216.
(D Note
Neve r dr ive until the tank is comp lete ly emp­
ty. The irregu la r supply of fuel that res ults
from that can cause engine misfires . Uncom­
busted fuel w ill then enter the exhaust sys­
tem. This can cause overheat ing and damage
to the catalyt ic converter.
Time/date display
You can switch between the quartz clock or the GPS controlled clock* depend ing on the vehicle
equipment. For mo re information, refe r to you r
MM I Operating Manual.
Outside temperature display
T he instrument cluster display shows the outside
temperature. At temperatures be low 42 °F ( +S
°C), a snowflake symbo l appears in front of the
temperature display.
If your vehicle is stationary or if you a re driving at
very low speeds, the temperature displayed may be slight ly higher than the actual temperature
o utside due to the heat radiating from the en ­
gine.
A WARNING
.-
Do not assume the roads are free of ice based
on the outside temperature d isplay. Be aware
that there may be ice on roads even when the
outside tempe rature is a round 42 °F (+5 °C)
a nd that i ce can increase t he risk of a cc idents.
(0 Tips
You can set the units used for temperature,
speed and othe r measurements in the Info­
tai nment system.
9

00
00
......
"' ,....
"' ...... 0 0 :::,
00
A WARNING , ~ -
Have the malfunction in the safety systems
inspected immediately. Otherwise, there is a
r isk that the systems may not activate during
a collision, which increases the risk of serious
injury or death.
(0) Brake pads
Ei] Brake pad s!
The brake pads are worn .
Drive to an authorized Aud i dea ler or authorized
Audi Service Facility immediately to have the brake pads checked.
App lies to: USA models
The Ei] indicator light turns on together with the
1111 indicator light
EPC Engine control (gasoline engine)
Applies to: vehicl es with gasoline engines
If the 13:a indicator light turns on while driving,
there is an eng ine control malfunction.
Immediately drive slowly to an authorized Audi
dealer or authori zed Audi Service Facility to have
the malfunction corrected.
0 Malfunction indicator lamp (MIL)
The malfunction indicator lamp (MIL) is part of
the On Board Diagnostic system (OBD II). The
¢4 symbol turns on when the ign ition is switched
on and turns off again once the e ngine is started
and running at a steady id le speed . This indicates
that the MIL is functioning correctly.
The indicato r light turns on if there is a malfunc­
tion in the engine electronics. See an autho rized
Audi dealer or authorized Audi Service Facility to
have the ma lfunction corrected. For additiona l
information, see
~ page 17.
The indicator light can also turn on if the f uel fill­
e r cap is not closed correct ly
i::!> page 157.
Instruments and indicator lights
!"-" , Engine speed lim itation
Applies to: vehicles with engine speed limitation
(I! Maximum engine speed XXXX RPM
The engine speed is automatically limited to the
speed displayed in the driver information system.
This protects the engine from overheat ing .
The engine speed limitation deactivates once the engine is no longer in the critical temperature
range and you have released the accelerator ped­
al once .
If the engine speed limitation was activated by
an engine control malfunction, the
13:a in dicator
light also turns on. Make sure that the speed
does not go above the speed displayed . Dr ive to
an authorized Aud i dea le r or authorized Audi
Service Facility immed iately to have the malfunc­
tion corrected.
~;. Engine oil
Ill Check oil level.
Refill engine oil as soon as possible i::!>page 162.
~ .,. Engine oil sensor
• Oil level sensor: System fault!
The sensor to check the eng ine o il level has
failed. Drive to an authorized Audi dealer or au­
thorized Aud i Serv ice Facility immediately to have
the malfunction cor rected.
i) Tank system
H Please refuel
If the indicator l ight turns on for the first time
and the message appears, there are about
1.8 -2.2 gallons ( 7.0 -8. S liters) of fuel left in the
tank .
H Fuel tank system malfunction! Contact deal­
er
Drive to an authorized Audi dealer or authorized
Audi Service Facility immed iately to have the
malfunction corrected. ..,.
15

a:,
a:,
...... N r--. N .... 0 0 ::, a:,
; Adaptive dampers
App lies to: vehicles with Audi drive select and suspension con­
tro l
B Suspen sion: system fault !
There is an adaptive damper malf unction .
Drive to an aut hori zed Aud i dea le r o r a uthori zed
Audi Service Facility immediately to have the
malfunct ion corrected.
¢¢ Turn signals
If the II or i!I indicator light b links, the turn
signals are activated. If both indicator lights are
blinking, the emergency flashers are act ivated.
If an indicato r light blinks twice as fast as usua l,
a t urn signa l bulb has failed . Caref ully drive to an
author iz ed Audi dealer or author iz ed Audi Service
Facility immediately to have the malfunction cor­
rected.
¢1.~ Trailer turn signal assembly
The indica to r li ght II blinks when the turn sig­
n a l is used , if a traile r h as been p roperly connec t­
e d to the veh icle .
If one of the turn s ignal bulbs on the trailer is
bu rned out or defect ive, the indicator l igh t will
n o t bl ink when yo u use the tu rn s ign als.
(D Tips
For ve hicles with a trail er hitch that was in­
s talle d later accord ing to fa ctory spec ifica­
ti ons, the trailer tur n signal as sembly is actu ­
at ed.
/fJl~/c:5 Door , hood or luggage
compartment lid is open
IJ-If the ind icator light tu rns on, then one of
the doors is not closed.
&-\-If the ind icator light t urns on, then the hood
is not closed .
§-j-If the ind icator light tu rns o n, then the lug­
g age compartment lid is not closed .
Instruments and indicator lights
On Board Diagnostic
System (OBD)
Malfunction indicator lamp (MIL)
The ma lf u nction ind icator lamp (MI L) Ill in t he
inst rument cluste r is pa rt of the On Board D iag­
nostic System (OBD II).
T he w arning/i ndic ator lig ht tu rn s o n when the ig ­
nition is switche d on and tu rns off once the en­
gine is starte d and is running in idle at a stab le
speed. This indicates t hat the MIL is f unctioning
correctly.
If the light does not turn off after starting the
engine
or t urns on while driving, this may ind i­
cate there is a malfunction in the eng ine. If the
i ndicator tu rns on, the catalytic conve rter may be
damaged .
Drive
with reduced engine performance (avo id
high speeds for extended periods of t ime and/o r
fast acceleration) and have the malfu nction cor­
rected . See an author ized Audi dealer or author ­
ized Audi Service Facility .
The indicator may turn on if the e lectronic speed
limiter is faulty . For addit ional information, see
¢ page 18, Electronic speed limiter .
The MIL may also turn on if the fuel filler cap is
not closed correctly ¢
page 157.
On-Board Diagnostics
Fig. 5 Locat ion o f Data Link Connecto r (OLC)
On -Board Diagnostics mo nitors the components
of your emission control system . Each monitore d
I>-
17

Instruments and indicator lights
component in your engine system has been as ­
signed a code. In case of a ma lfunction, the com­
ponent w ill be identif ied and the fau lt stored as a
code in the control module memory.
The MI L light may a lso ill uminate if there is a
leak in the on-board f uel vapor recovery system.
If the light ill uminates after a refueling, stop the
veh icle and make sure the fuel filler cap is prop­
erly closed (on ly vehicles with gasoline engine)
¢ page 157 .
In order to make an accurate d iagnosis, the stor­
ed data can on ly be displayed using special diag­
nostic equipment (generic scan too l for 0BD) .
In order to connect the specia l diagnostic equip ­
ment, p ush the plug into the Data Link Connector
(DLC). The DLC is located to the right of the hood
release ¢
fig. 5.
Your authorized Audi dealer or qualified work­
shop can interpret the code and perform the nec­
essary repair.
A WARNING
Do not use the diagnostic connector for per­
sonal use. Incorrect usage can cause malfunc­
tions, which can increase the risk of a colli­
sion!
Electronic speed limiter
Your veh icle may be facto ry equipped with ti res
that are r ated for a maxim um speed of 130 mph
(210 km/h) . This is less than the maxim um speed
of yo ur vehicle. To reduce the risk of sudden tire
fa ilur e and loss of control if the veh icle is operat­
ed at excessive speeds, your vehicle a lso has an
electronic speed limiter. The electronic speed lim iter prevents your vehicle from going faster
than the t ire speed rating . For more information
¢ page 171 .
If the engine contro l unit receives faulty vehicle
ro ad speed s ignals, the Malfunction Indicator
Lamp (MIL)
¢4 will illum inate . If this occurs,
contact the nearest authorized Audi dealer for
assistance .
18
A WARNING
--
Always observe the posted speed limits and
adjust your speed to suit preva iling road, traf­
fic and weather conditions. Never drive your
vehi cle faster than the maximum speed rating
of the ti res insta lled.

a:,
a:,
...... N r--. N .-< 0 0 ::, a:,
You can identify which on-board computer is cur ­
r e ntly being shown in the display based on th e
small
O or fl .
The o n-board computer 0 ¢ fig . 9 is a short-term
memo ry .
It collects driving information from the
time the ignition is switch ed on until it is sw itch ­
ed off. If you continue driving within two hours
after switching the ignition off, the new values
are included when calculating the current trip in­
formation .
Unlike the short-term memory , the long-term
memory (on-board computer
fl ) is not erased
automatically. You can select the time period for
evaluating trip information yourself .
You can call up the following information consec­
utively in on -board computer
O or fl :
- Date
- Range
- Travel time
- Average consumption
- Average speed
- Distance
- Current fuel consumption
@ Tips
Information on the efficiency program
¢page 21.
Efficiency program
Overview
Applies to: vehicles with efficiency program
Fig. 10 Instrument cluster: e ffi ciency program
Driver in forma tion system
Operating with the windshield wiper lever*
.,. Press the !RESE T I button @¢page 19, fig. 7
repeatedly until the efficiency program appears
in the display .
Operating with the multifunction steering
wheel*
.,. Open car f unctions and select the Efficiency
program
menu item ¢ page 20.
The eff iciency program can help you to use less
fuel.
It eva luates dr iving information in reference
to fuel consumption and shows other equipment
influencing consumption
¢ page 21. Fuel econ­
omy messages ¢
page 22 provide tips for effi­
c ient driving.
The efficiency program uses distance and con­
sumption data from trip computer
1. If the data
are deleted in the efficiency program
¢
page 19/ ¢ page 20, those values are also reset
in trip computer
1.
Other equipment
Applies to : vehicles with efficiency program
Fig. 11 Instrume nt cluster: e nerg y consumers
Requirement: The efficiency program ii must be
open
¢ page 21 .
.,. Operating with the windshield wiper lever*:
press the button@¢
page 19, fig. 7 repeated­
ly, until the other equipment affecting con­
sumption appears in the instrument cluster dis­
play
¢ fig . 11 .
.,. Operating w ith the multifunction steering
wheel* : keep turning the thumbwheel@
¢
page 20, fig . 8 unti l the other equipment af-
fecting consumption appears in the display. .,.
21

Driver information system
Other equipment that is currently affecting fuel
consumption is listed in the efficiency program .
The display shows up to three other items of
equ ipment @. The equipment using the most
power is listed first. If more than three items us­
ing power are switched on, the equipment that is
currently us ing the most power is displayed.
A gauge @also shows the current total con­
sumption of all other consumers.
Fuel economy messages
Applies to: vehicles with efficiency program
Fig . 12 Instrument cluster: example of economy t ip
Fue l economy messages are d isplayed when fue l
consumption is increased by certain conditions. If
you follow these economy tips, you can reduce
your vehicle's fuel consumption. The messages
appear automatically and are only displayed in
the efficiency program . The fuel economy mes­
sages turn off automatically after a certai n pe ri­
od of time.
• To turn an economy tip off immediately after it
appears, press any button on the windshield
wipe r lever*/multifunction steering wheel*.
(D Tips
-Once you have turned an economy tip off, it
will only appea r again after you turn the ig­
nition on again.
- The economy tips are not displayed in every
instanc e, but rather in intervals over a peri­
od of time .
22

00
00
......
"' ,-...
"' ...... 0 0 :::,
00
Warm and cold
Climate control system
Description
Depending on the vehicle equipment, different
systems could be installed:
- manual climate control system* or
- automatic climate control system"
The climate control system warms, cools and re­ moves humidity from the air in the vehicle interi­
or.
It is the most effective when the windows and
panorama glass roof" are closed. If there is a
build-up of heat inside the vehicle, ventilation
can help to speed up the cooling process .
Pollutant filter
The pollutant filter removes pollutants such as
dust and pollen from the air.
Key recognition*
The automatic climate control* settings are stor­
ed and assigned to the remote control key that is
in use.
A WARNING
Reduced visibi lity is dangerous and can cause
accidents.
- For safe driving it is very important that all
windows be free of ice, snow and condensa­
tion.
- Completely familiarize yourself with the
proper use and function of the heating and
ventilation system and especially how to de­
fog and defrost the windows.
- Never use the windshield wiper/washer sys­
tem in freezing weather until you have
Warm and cold
warmed the windshield first, using the heat­
ing and ventilation system. The washer solu­
tion may freeze on the windshield and re­
duce visibility .
(D Note
-If you suspect that the air conditioner has
been damaged, switch the system off to
avoid further damage and have it inspected
by a qualified dealership .
- Repairs to the Audi air conditioner require
special technical knowledge and special
tools. Contact an authorized Audi dealer for
assistance .
® For the sake of the environment
By reducing the amount of fuel you use, you
also reduce the amount of pollutants emitted
int o the air.
(D Tips
-To prevent interference with the heating
and cooling output and to prevent the win­
dows from fogging over, the air intake in
front of the windshie ld must be free of ice,
snow or leaves.
- Condensation from the cooling system* can
dr ip and fo rm a pudd le of water under the
vehicle . T his is normal and does not mean
there is a leak.
- The energy management system may tem­
porarily switch off certain functions, such as
the seat heating* or rear window defogger .
These systems are avai lable again as soon
as the energy supply has been restored .
53

Driving
Driving
General information
Breaking in
A new vehicle must be broken in, and the break­ in distance should be 1,000 miles (1,500 km).
For the first 600 miles (1,000 km), do not drive
at speeds that are more than 2/3 of the maxi­
mum permitted RPM, avoid full acceleration and
do not tow a trailer. You may gradually start in­
creasing the RPM and the speed between 600 miles (1,000 km) and 1,000 miles (1,500 km) .
During the first hours of use, the engine has a
higher internal friction than later on when all
moving parts have settled into place with each
other.
How the vehicle is driven during the first 1,000
miles (1,500 km) also affects the engine quality.
Drive at moderate engine speeds after the initial
break-in period, particularly when running a cold
engine . This will reduce engine wear and improve
the mileage .
Do not drive at too
low of an engine speed (rpm).
Shift down if the engine stops running "smooth­ ly". Extremely high engine speeds are automati­
cally reduced .
Avoid damaging the vehicle
When you are driving on poor roads, or over
curbs, steep ramps , etc., make certain that low­
lying parts such as spoilers and exhaust system
parts do not bottom out and get damaged.
This is especially true for vehicles with low-slung
chassis (sports chassis)* and fully loaded
vehicles.
Driving through water on roads
Note the following to reduce the risk of vehicle
damage when driving through water, for example
on flooded roads:
- The water must not be any higher than the bot­
tom of the vehicle body.
- Do not drive faster than walking speed.
58
A WARNING ,_
After driving through water or mud, the effec­
tiveness of the brakes may be reduced due to
moisture on the brake rotors and brake pads.
A few careful brake applications should dry
off the brakes.
([) Note
Vehicle components such as the engine,
transmission, suspension or electrical system
can be severely damaged by driving through
water.
(D Tips
- Determine the depth before driving through
water.
- Do not stop the vehicle, drive in reverse or
switch the engine off when driving through
water.
- Keep in mind that oncoming vehicles may
create waves that raise the water level and
make it too deep for your vehicle to drive
through safely.
-Avoid driving through salt water, because
this can cause corrosion.
Economical and environmentally-friendly
driving
The amount of fuel consumption, the environ­
mental impact and the wear to the engine,
brakes and tires depends mostly on your driving
style . With an anticipatory and economic driving
style, fuel consumption can be reduced by ap­ proximately 10-15%. The following tips will help
you conserve the environment and your money at
the same time.
Anticipatory driving
A vehicle uses the most fuel when accelerating .
When you drive with anticipation, you do not need to brake as often and so you accelerate less.
When possible , let your vehicle coast with a gear
engaged, for example, when you notice that the
next traffic light is red. This produces an engine
braking effect, which helps to protect the brakes
and tires and reduces the emissions and fuel
...