key AUDI Q5 2018 Owner's Guide

u co ..... N r--­N ..... 0 <( 0 00
(D Tips
The "S" selector lever position automatically
engages when the
Dynamic mode is se lected .
Selecting the driving mode
Applies to: ve hicles with Audi drive select
Fig. 126 Center conso le: controls for drive select
0
0 >'-LL ID
~ Press the left o r right arrow key¢ fig. 126 until
the desired mode appears in the instrument
cluster/Infotainment system display . Or
~ Se lect in the Infotainment system: !MENUI but-
ton
> Vehicle > Audi drive select.
~ Select and confirm the desired setting.
You can change the driving mode when the vehi­
cle is stationary or wh ile driving. If traffic per-
Adjusting the Individual mode
Applies to: ve hicles with Audi drive select
Assistance systems
mits, after changing modes, briefly take your
foot
off the accelerator pedal so that the recently
selected mode is also activated for the engine.
Offroad* or Lift/ Offroad* -activates off road
f unct ions to support driving on rough terrain.
T he engine, transmission and steering adjust and
the Start/Stop system* switches
off. Applies to
air suspension*: the vehicle also lifts for pass ing
over obstacles to mainta in maximum ground
clearance.
Allroad * -only for ai r suspension *: the vehicle
lifts to maintain higher ground clearance for dif­
ficult stretches of road.
Comfort -provides a comfort -oriented vehicle
setup and is suited fo r long d rives on h ighways .
Auto -provides an overall comfortable yet dy­
namic driving feel and is suited for everyday use.
Dynamic -gives the drive r a sporty driving feel
and is suited to a sporty driving style .
Individual -¢ page 12 7.
A WARNING
-
Pay attention to traffic when operating the
drive select to reduce the risk of an accident.
You can adjust the vehicle settings to your personal preferences .
~ Select in the Infotainment system: !MENUI but­
ton
> Vehicle > Audi drive select> Individual >
right contro l button.
Afte r you have closed the settings, you will auto­
mat ica lly dr ive in the
Individual mode.
Systems comfort
Engine/transmission
balanced
Air suspension * comfortable
Steering comfortable Th
e equipment in yo ur vehicle will determine
which settings you can adjust . The fo llowing ta­
ble gives an overview of the characteristics .
auto dynamic
balanced
sporty
ba lanced sporty
balanced sporty
Dynamic
steering* comfortable/ind irect ba lanced/direct sporty/direct
Suspension control* comfortab le balanced sporty
Sport differential* Off balanced sporty
127
...

Ass is tance sy stem s
Systems comfort
Engine sound*
subtle
AC C* comfortable
al Subtle in th e se lector lever position "D" and sporty in " S".
@ Tips
Your sett ings a re automatical ly saved in Indi ­
vidual mode.
Raising/lowering the vehicle
Applies to: veh icles w ith a ir suspe nsion
.,.. Press the left or right arrow key ¢ page 127,
fig . 126
until the desired mode appears in the
instrument cluster/Infotainment system d is­
play. Or
.,.. Select in the Infotainment system: I MENU I but­
ton
> Ve hicle > Aud i d rive sele ct .
.,.. Select and conf irm the desired setting.
CD Note
The Lift / Offroad mode switches to All road
mode when dr iv ing above approximately
20 mph (30 km/h) and the vehicle automati­
cally lowe rs again . These modes may only be
used on a tempo rary bas is and are not intend­
ed for continuo us d riving.
(D Tips
- The filled -in boxes in the Infotainment sys­
tem represent the current vehicle level. If
the segment is white or blinking, then the
vehicle is lifting or lowering. If only the bot ­
tom segment is filled in, then the veh icle is
at the lowest level ( lowest ground clear­
ance). If all the segments are filled in, then
the vehicle is at the highest level (highest
ground clear a nee) .
- The target level is highlighted with a
red
frame while the vehicle is lifting or lower­
i ng . The frame is then h idden when the ve­
hicle reaches the target level.
- The vehicle lifts up to the highest level
when you select
Lift / Offroad . Select an­
other mode to lower the vehicle again .
128
auto dynamic
subtle/sportyal sporty
ba lanced sporty
Rear lowering
Applies to: vehicles wit h air suspensio n
The rear of the vehicle con be lowered to make
loading and unloading easier.
Fig. 127 Section of luggage compa rtment: rear lower ing
but ton
Requirement: all vehicle doors must be closed.
.,.. O pen the luggage compar tment lid.
.,.. Press the lower sect io n of the button
C) fig. 12 7@ . The rear of the vehicle lowe rs .
.,.. Press the upper section of the button@. The
rear of the veh icle raises again.
The rear lowering a utomat ica lly deactiva tes
whe n you select another mode or when the ve hi­
cle speed exceeds approx imately 2 mph (2 km/
h).
The LED in the button t urns on while the veh icle
is lowering. When the loading level has been
reached, the LED stays on as long as the rear of
the vehicle is lowered. The LED turns off when
the veh icle returns to the original level.
CD Note
-Before the rear lowering ends, make sure
there is enough clearance above the vehicle
and the luggage compartment lid, if it is
open .
- Do not park the vehicle in a lowered load ing
level.
..,..

Parking aid
Adjusting the parking aid
Applies to: vehicles with a rear parking system/parking sys­
tem plus/rearview camera/peripheral cameras
The functions are adjusted in the Infotainment
system .
.,. Select in the Infota in m ent system: IMENU I but­
t on
> Vehicle > left co ntro l bu tton > Driver a s­
sistance > Parking aid .
Or
.,. When the par kin g aid is active, se lect in the In -
fotainment system : rig ht contro l butto n*.
End sy stem * -stop t he pa rking aid
Activate automatically * -switch automatic acti­
vation on/off
Front volume * -volume for the front area
Rear volume -vo lume for t he rear area
Entertainment fader -the vol ume o f th e aud io/
video so urce is lowered when t he parking system
is turned on.
T he new value is g iven b riefly du ring the a djus t­
men t.
View * -sw itch betwee n an optical d isplay
( Graphic ) and camera image ( Camera ) in the
r ight section of the disp lay.
Trail er view * -show trailer view
*Auto. front /rear came ra change* -the view be­
h ind the veh icle
( Rear mode) is displayed auto­
mat ica lly w hen you shift into reverse gear. The
v iew in front of the vehicle
( Front mode) is d is ­
p layed automat ically whe n you sh ift into the for­
ward gea rs. When first activat ing in a forward
gea r with t he
P,,1~ bu tto n, the front s ide v iew is
d isp layed
(Corner view (front) mode).
If you do not set
the./, t h e view behind the vehi­
cle
( Rear mode) is a lways d isp layed and it does
no t swi tch to the
Front mode whe n a forwar d
ge ar is se lec ted .
(0 Tips
-Seve ral menus can be accessed w ith the
r ight contr ol butt on o nly w hen the p ark ing
a id is active.
138
- The set tings for vo lume and automa tic ac ti­
vation * are stored automatically and as­
signe d to the remote control key in use.
Error messages
Applies to: vehicles with a rear parking system/parking sys­
tem plus/rearview camera/peripheral cameras
Ill Rear parking aid: malfunction! Ob stacl es
cannot be detected
Ill Front parking aid: malfunction! Obstacles
cannot be detect ed
Ill Parking aid : malfunct ion! Obstacles cannot
be detected
When one of these messages appears, there is a
system malfunction. The LED in t he
Pw, button al­
so blinks whe n sw itchi ng it on. The releva nt mes­
sage o nly appears again w hen you manually acti ­
vate the par king a id wi th t he b utton .
[ii Rear parking aid : obstacle detection restrict­
ed
The rea r cross-traffic ass ist* c:!;> page 124, Rear
cross-traffic assist is no t ava ilable. Either the ESC
is sw itched off, or the radar sensors may be cov­
ered by a bike rack, stickers, leaves, snow or oth­
er objects . Switch t he ESC on , or clean the area in
front of the sensors if necessary
c:!;> page 121,
fig. 121 .
If this message cont inues to be d is­
played, drive immed iate ly to an author ized A udi
de aler or au thor ized A udi Servi ce Facili ty to h ave
t h e mal funct ion repai red .
Parking system plus*
If a senso r or speaker is faulty, the.!¼ symbo l
will appear i n fro nt of/behind the vehicle in the
I nfotai nment syste m disp lay. If a rear sensor is
f aulty, only obs tacles th at are in areas @ and @
a re show n
<:!;>page 131, fig . 128 . If a front senso r
i s fa ulty, o nly obstacles that a re in a reas © and
@ are s hown.
Peripheral cameras*
There is a system malfunction if t he % symbo l
appe ars and the co rresponding area of the dis ­
play is shown in black . The camera is not wo rking
i n th is area.
...

u co ..... N r-­N .....
~ 0 co
Multi Media Interface
Traffic safety information
Audi recommend s performing certain Infotain­
ment system fun ctions, such as entering a desti­
nation, only when the vehicle is stationary . Al ­
ways be prepared to stop operating the Infotain­ ment system in the interest of your safety and
the safety of other road users.
_& WARNING
Only use the Infotainment system when traf­
fic conditions permit and always in a way that
allows you to maintain complete control over
your vehicle.
@ Tips
Certain functions are not available while driv­
ing .
Multi Media Inte rface
Introduction
The Multi Media Interface, or MMI for short,
combines various sys tems for communication,
navigation* and en tertainment in your Audi. You
can operate the
MMI using the MM I control pan­
el, the multifunction steering wheel or the voice
recognition system* .
Fig. 148 MMI co ntrol p an els · integ rated s hortcu t keys
T op : w it ho ut MM I tou ch Bottom : w ith MM I touch
MM I control panel overview
© Control knob with joystick function 149, 153
@ MM I touch control pad* . . . . . . . . 151
@ Left control button . . . . . . . . . . . . 150
© Right control button . . . . . . . . . . . 150
® Buttons for opening menus
directly . . . . . . . . . . . . . . . . . . . . . . 149
@ IMENUI button . . . . . .. .. . . .. . . . 149
0 IBACKI button . . . .. . . . . . . . . . . . 149
@ Shortcut keys . . . . . . . . . . . . . . . . . 155
147

Shortcut keys
Frequently used radio stations can be stored on the s hortcut keys.
T he sho rtc ut key s are located on the M MI control
panel ®¢ page 147, fig. 148 .
Storing radio stations : tur n t he control kno b to
the desired rad io station in a list ( for example, a
radio station in the FM station list). Press and
h o ld the desired shortcut key for several seconds.
The active radio station will be stored on t he
shortcut key.
Accessing a radio station: press the shortcut key .
Letter/number speller
Fig. 163 D iagram: lette r/ n um be r spe ller
You can enter letters, numbers and symbo ls in
the MMI using the letter/number speller. This
option is ava ilab le when the input f ield @is ac­
tive
¢ fig . 163.
-Opening /clos ing the letter /number speller :
move the control knob up/down when t he in put
field is active.
O r: select the right contro l but­
ton
> Open speller /Close speller .
-Entering characters : turn the control knob with
t h e character selection
@ ¢fig . 163 to the de­
s ir ed symbo l. Press the control knob to confirm
t h e cha racter . You r input is disp layed i n the in­
pu t field @. When you have en te re d all of the
~ ch aracters, sele ct an d confirm t he I L IST I button .....
~ © c::> fig. 163 . Or: push the con trol knob dow n.
N .....
~ 0 co
Multi Media Inte rface
Displaying a radio station : swipe you r finger ove r
t h e shortcut keys .
Deleting a stored radio station : reset the Short ­
cut keys
to the fa ctory default se tt ings
¢ page 246 .
{l) Tips
It
i s no t pos sible to en ter num bers u sing the
s hor tc u t k eys . Use the number spe ller
¢ page 155 or MMI touch* ¢page 151 to e n­
ter n umbe rs .
-Entering accented characters (such as a, ~. n,
o) *: tu rn the contro l knob with the character
select io n @ c::>fig . 163 to a character. To open
the selected accented characters, press and hold the con trol knob. Tu rn the control knob
w ith the character selec tion
@ c::> fig. 163 to an
ac cen ted charac ter. Press the cont ro l knob to
inser t the a ccen ted ch ara cter. To close t he ac­
c ented characters wit hout select ing a charac ­
ter, press an d hold the contro l knob again.
Or :
select a nd confi rm !aou I 0 c::> fig . 163. Se lect
and confirm an accented cha racter .
-Deleting chara cters : select an d confirm <=:> fig. 163. To delete all cha racters in the input
fie ld, press and hold the control knob on
til all characters in the input f ield a re deleted .
...,
155

u co ..... N r--­N ..... 0 <( 0 00
Audi connect vehicle control
Introduction
Applies to vehicles with Audi connect vehicle control
With the Audi connect vehicle control services l) ,
you can access various information or use individ­
ual functions in the
Audi MMI connect app or in
myAudi .
Audi connect vehicle control includes the follow­
ing services:
- Remote locking and unlocking ¢
page 198.
-Vehicle status report¢ page 198.
-Parking location ¢ page 198 .
-Geofencing Alert ¢ page 199.
-Speed Alert ¢ page 199.
-Valet Alert ¢ page 199.
- Stolen Vehicle Locator ¢ page 199.
-Online Audi service request ¢page 199.
(D Tips
-Accessing specific data or controlling func­
tions remote ly depends on the charge leve l
of the vehicle battery. Therefore, these
functions only have limited availability after
switching off the ignit ion.
- The services are provided through a SIM
card installed in the vehicle. The cost of the
call and data connections is included in the
price for the services. Services are provided
assuming that the cell phone network re­
quired for the installed S IM card is function­
in g and ready to operate. The available serv­
ic es set by Audi AG are only available within
the cell phone network coverage area for
the cell phone service provider selected by
Audi AG .
- You can also find more information on Audi
connect on line at www.audiusa.com.
l) In pre parat io n at t he time of p rinting. T he a vailab ilit y o f
the services o ffered depends o n the co untry and may
c hang e over tim e.
Audi connect vehicle control
Setup
Applies to vehicles with Audi connect vehicle control
To use Audi connect vehicle control services 1>,
please note the fo llowing :
Creating and verifying a user account
"'Create an account at www.aud iusa.com/myaudi
and verify it.
Setting a key user in the vehicle
Requirements: the ignition must be switched on .
Another key user must not be set in the veh icle .
If necessary, reset the key
user ¢ page 198.
.. Select in the Infotainment system: I MENU ! but­
ton
> Audi connect > if necessary, Display
available functions >
right control button >
Audi connect user management > Key user >
Set key user .
"' Enter the user name for your ve rified account
and enter the IO-digit vehicle code. You can rub
the key tag for your remote control key to re­
veal the vehicle code
¢ page 31.
.. Select and confirm Log in.
You can now use the vehicle control services
through the
Audi MMI connect app or through
www .audiusa.com/myaudi.
Using vehicle control services in the Audi
MMI connect app
Requirement: your mobile devices must be com­
patible.
.. Install and start the Audi MMI connect app on
your mobi le device .
.. Log in to the Audi MMI connect app using your
user name and password and se lect your vehi­
cle.
(D Tips
- Store the vehicle code in a secure place . It
may be necessary to re-enter the vehicle
code.
197

Audi connect vehicle control
-Pay attention to upper-and lower -case let ­
ters when entering the vehicle code.
-If you do not have the 10-digit vehicl e code,
contact an authorized Audi dealer or author­
ized Audi Service Facility .
Additional options
Applies to vehicles with Audi co nnect vehicle control
License subscription
The validity and expirat ion date of you r subscrip­
tions are displayed. When
Warning before sub­
scription expires
is activated, a message wi ll be
disp layed warning you that your license is about
to expire.
Select :
!MENU ! button> Audi connect > Display
available functions >
right control button> Li­
cense subscription.
Resetting the primary user
F or examp le, you ca n reset the key user when
selling your vehicle in order to deactivate these
services .
Requirement: the ignition must be switched o n.
Select :
!M ENU ! button> Audi connect > right
control button
> Audi connect user management
> Key user > Reset key user .
Warning levels
Requirement: the primary user must have set one
or more warning levels. Secondary users can only
see if a warning level is active or not .
Select:
! MENU ! button> Audi connect > right
control button
> Alerts.
Remote locking and
unlocking
Applies to veh icles with Audi connect vehicle control
You can lock and unlock your veh icle using this
service .
Requirement
-This requires the 4-dig it PIN that you specified
during the verification on www.audiusa.com/
myaud i.
-The vehicle must be stationary.
198
-The ignition must be switched off.
Vehicle status report
Applies to vehicles w ith Aud i connect ve hicle control
The Dr iver Informat ion System collects data un­
der certain conditions and sends it to a server.
When data is sto red, you can access va lues such
as these using the service :
-Remaining range,
-Fuel tank level,
-Oil level,
-If the vehicle doors are open/closed or locked/
un locked,
-mi leage,
-Next oil change
-Next service,
-Warning messages,
-If the parking lights are on/off .
A WARNING
Do not ignore messages and warning or ind i­
cator lights that turn on in the vehicle be­
cause of the info rmation in the status report.
This could lead to break downs in on the road ,
accidents and serious injuries.
Parking location
Applies to vehicles w it h Aud i connect ve hicle co ntrol
The vehicle collects data unde r ce rta in cond it ions
and sends it to a server .
When data is stored, you can access values such
as these using the service :
-Vehicle location display
-Display of one's own location
-Route to your vehicle
If your mob ile dev ice also has a navigation func­
tion, you can nav igate to your last known parking
l ocation.
Deactivating and activating parking position
-Select: ! MENU!> Audi connect> Car Finder
parking position .
If you do not set./, no location information will
be sent to the server.

u co ..... N r--­N ..... 0 <( 0 00
(D Tips
- The new parking location cannot be deter­
mined with this service if the vehicle is
moved after shutt ing the vehicle off and
without sw itching the ign ition on and off
again, for example when being towed or if
the veh icle is stolen .
- If the vehicle is moved and shut off again
us ing the second key, for example, the new
parking locat ion is transm itted to the server
afte r switching the ignition off.
Geofencing Alert
Applies to vehicles with Audi connect vehicle control
You can set approved and forbidden zones for
your veh icle using this service . If your vehicle
l eaves an approved zone or ente rs a forbidden
zone, you will be notified by a push not ificat ion
and/or an e -mai l. You can set up to five zones
and a lso assign time limits .
Requirement
-You must be ver ified as the pr imary use r of your
vehicle on myAudi.
0) Tips
You can set o n myAudi if you would like to be
notified via push not ificat io ns a nd/or e-ma il.
Speed Alert
Applies to vehicles with Audi connect vehicle control
You can set up to two speed limits for your veh i­
cle us ing th is serv ice. If your vehicle exceeds a set
speed limit, you will be notified by a push not ifi­
cation and/or e -mail.
Requirement
- You must be ver ified as the pr imary user of your
vehicle on myAudi .
(D Tips
You ca n set o n myAudi if you would like to be
notified via push not ificat ions and/or e-ma il.
Audi c onn ect ve hicl e co ntr ol
Valet Alert
Applies to vehicles with Audi connect vehicle control
If you give your vehicle over to a parking service,
you can s et a zone and a sp eed limit using the
Audi MMI conne ct app . If the vehicle leaves the
z one or the exceeds the speed lim it, you will be
noti fied by a push notification and/or e-mail.
Requirem ent
- You must be verified as the primary user of your
vehicle on myAudi.
(D Tips
You can set on myAud i if you would like to be
notified via pus h notifications and/or e -mail.
Stolen Vehicle Locator
Applies to vehicles with Audi connect vehicle control
This serv ice helps yo u to track yo ur veh icle if it is
stolen.
Proceed as fo llows if there is a theft:
"" Contact the police . You receive a Case ID .
"" Call the service hotline and give your Case ID .
The serv ice hotline will forward the estab lished
data to the police .
{!) Tips
You rece ive the Audi Service hot line number
when you purchase your vehicle .
Online Audi service
request
Applies to vehicles with Audi connect vehicle control
Requirement: to be able to use on l ine Aud i serv­
ice request , you must activate the service at
www .aud iusa.com/myaud i and se lect an aut hor­
ized Audi dea ler or author ized Audi serv ice facili­
ty .
Online Audi serv ice request transmits service- re l­
evant data to your se lected autho rized Aud i dea l­
er or autho rized Aud i service fac il ity. They w ill
contact you before your next service appoint ­
ment .
199

Radio text is availab le for the selected station .
See
¢ page 221.
@ Screen view
Display Cover art or Station logo. See
¢ page 224, Preferred picture view *.
Displaying the station list:
Turn the control knob. Or : press the I BACK ! but­
ton .
Radio menu
Fig. 203 Example: Ra dio menu
~ Se lect : I RADIO ! button > left control button.
Setting the frequency band : select and confirm
the desired frequency band in the radio menu
¢ fig. 203 . Or: press the I RADIO I button repeat­
edly until the desired frequency band is set . The
station list is displayed.
@ Presets
The presets list is displayed q page 223, Pre­
sets .
@SiriusXM alerts
App lies to: ve hicles with SiriusXM alerts
After you have sto red a SiriusXM alert for your fa­
vorite tracks or artists
page 222, an overview
of your favorite tracks or artists currently being
received on SiriusXM is displayed .
@SiriusXM
App lies to: ve hicles with SiriusXM alerts
The SiriusXM* station list is disp layed.
Additional frequency bands
u co ~ Depending on the vehicle equ ipme nt, you may al-
:::. so be able to se lect additional frequency bands ......
~ @ /@ ¢ fig. 203 in the selection menu. 0 co
Radio
Presets
You can store your favorite stations from every
frequency band in the presets list.
~ Select: the I RADIO I button > l eft control button
> Presets.
Requirement: the presets list must be displayed.
-Storing presets : select and confirm a free pre­
set space.
Follow the system instr uctions.
- Select and confirm
a station from the list if
necessary.
Requirement: a station list must be d isplayed .
-Storing presets : select: an entry from the list>
right control button > Store as preset. Or:
press and hold the contro l knob for several sec­
onds .
T he shortcut keys are automatically assigned to
the presets 1 to 8. You can select the stations di­
rectly using the preset buttons
page 155.
-Displaying the presets list : select: I RADIO I but­
ton
> Presets .
Requirement: the presets list must be displayed .
-Listening to presets: select and confirm a pre­
set from the list.
- Move favorite : select a favorite from the list >
right control button > Move favorite. Or : press
and hold the control knob for several seconds.
Select and confirm the location of the selected
preset.
- Deleting presets: select a preset from the list >
right control button > Delete preset > Delete
this preset or Delete all p resets .
Additional settings
Radio settings
~ Select: I RADIO I button > rig ht control button >
Radio settings.
The following se ttings can be selected , depend-
in g on the band that is selected :
..,.
223

System settings
wait for the sig nal t one (bee p) to say a new
command.
Volume : you can a djust th e vol ume of th e
p romp ts by turning the con tro l k no b.
Individual speech training (on ly when the v ehi­
cle is s ta ti onary): yo u ca n ad apt the vo ice recog­
ni tion sy ste m to your voic e or pro nunciati on in
or der to im prove the sys tem's a bili ty to re co gni ze
your speec h. Indivi dua l speech train ing is com ­
p rised of 20 s peech ent ries t hat consist o f com ­
mands and sequences of numbers . You can de­
lete the p rogrammed voice t rain ing with the
Re­
set individual speech training
function.
Display brightness
You can a djust the brigh tness o f the Info tain ­
ment system disp lay by t urning the cont ro l knob.
Factory settings
D epe ndi ng on t he ve hicle eq uipme nt, th e fo llow­
i ng fu nctio ns ca n b e rese t to factory se ttings :
-Sound settings
- Radio
- Media settings
- Jukebox *
- Directory
-Telephone
- Bluetooth and Wi-Fi*
- Navigation settings*
- Navigation and online memory *
- Speech dialog system*
- Shortcut keys
- Message settings *
-Apps *
- Tool tips
- Audi connect *
- Audi smartphone interface *
You can select the desi red functio ns i nd ividua lly
or all at once with the option
Select all entries .
Select and confirm Restore factory settings .
(D Tips
Make sure that not o nly the sett ings were de­
leted but a lso the sto red data, if ap plicable.
246
Connection manager
Introduction
The connection manager gives you an overview
of your conn ected devic es and th eir network sta ­
tus .
Settings Conne -ction manager I
-====- ,.· • Prima hone: MyPhone .,.
c M yPhone
• Second ary phone :
• Data conn ection :
• MM I
connect App :
• Audi smartphone:
Fig. 216 Co nnec tion man ag er
Ii'!
Not connected
Not
conn.,ct.,d
Not connected
Not
conn..cted
"' Select : !ME NUI bu tton> Settings > left con trol
bu tton >
MMI settings > Connection manager .
"'Sele ct a nd confirm a menu item.
If a mobile device was already connected and you
select and co nfirm the co rresponding menu item,
t h e dev ice name and co nnect ion mode a re dis­
p layed under the menu i tem
r:!;> fig. 216.
Yo u can indiv id ually connect (~) or disconnect
(0) a pa ired device .
Requirement:
- The ve hicl e m ust be statio na ry and the ignit io n
m ust be switc hed on .
- Th e Bluetooth sett ings will open on yo ur mo ­
bi le device dur ing the connection setup .
- T he Blue tooth func tion and v is ibili ty of the MMI
c:!;> page 24 8 and mobile device must be switc h­
ed on.
- T he mo bile device to be con nected m ust not be
connected to any othe r Bluetoot h dev ice .
Primary phone
App lies to: vehicles wit h telepho ne
- Connect new device: search for and connect a
cell p hone.
- List of devices already paired : select yo ur cell
phone from the list of all the dev ices that a re
already paired.