wheel AUDI Q7 2008 4L / 1.G Infotainment MMI Operating Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2008, Model line: Q7, Model: AUDI Q7 2008 4L / 1.GPages: 193, PDF Size: 6.18 MB
Page 111 of 193
Navigation109
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Start the route guidance by turning the rotary push-
button to Start route guidance and then pressing the
rotary pushbutton. The route criteria and subsequently
the map page 110 will be shown on the MMI display.
An arrow will appear in the display of the driver informa-
tion system.
Applies to vehicles: with navigation system
Setting a destination from the map
A point on the map can be set as a destination or stop-
over, stored in the directory and called up on the tele-
phone.
Important: The route guidance function must be activated
page 105.
Activating the map legend menu
– Press the Map control button. A map will appear on the
MMI display.
– Press the rotary pushbutton. The map legend menu will
now be activated, and the crosshairs will appear in the
map display fig. 97.
Changing the map scale
– Turn the rotary pushbutton to position and press the
rotary pushbutton. You can now zoom out of or zoom in
on the map by turning the rotary pushbutton.
– Press the rotary pushbutton again to leave position .
Moving the crosshairs
– Turn the rotary pushbutton to position .
– Press the rotary pushbutton. Using the rotary push-
button, you can now move the crosshairs horizontally.
– Press the rotary pushbutton again. Using the rotary
pushbutton, you can now move the crosshairs vertically.
– To deactivate the moving crosshairs function, press the
rotary pushbutton again.
Setting a destination
– To set a selected point in the map as the destination, turn
the rotary pushbutton to position .
Fig. 97 Changing a
destination with the
crosshairs
Fig. 98 Calling a posi-
tion on the map
A1
A1
A3
A2
Page 113 of 193
Navigation111
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control You can exit the legend menu by pressing .
Orientation. The map is displayed either facing north or facing
the direction of travel page 118. If you select the orientation
option in the activated legend menu and press the rotary push-
button, the orientation switches from the direction of travel to
the direction facing north and vice versa. This setting is not
stored.
Scale. Turn the rotary pushbutton clockwise/anti-clockwise to
zoom in or out. You can also change the scale via the activated
legend menu. The setting that was last activated is stored.
Distance to the destination
Estimated time of arrival
Examples of selected map contents
Depiction of motorway exits on a scale of 50 m to 500 m. On a
scale of 750 m to 8 km the exits are displayed as dots.
Location of the vehicle
Destination control button. To switch to entry space
page 105, fig. 91 or the route plan page 108, fig. 96.
If you use the crosshairs to select map contents, any existing
information on the contents (e.g. address, phone number) will
be displayed. If you select a traffic jam symbol and press the
rotary pushbutton, the corresponding TMC traffic report will be
displayed. On a scale of 1 km upwards, the map contents will
not be displayed.
Display of position coordinates of the crosshairs (longitude and
latitude).
Map position menu. The point on the map selected with the
crosshairs can be set as a destination or stopover, stored in the
directory and called up on the telephone page 109.
The crosshairs can be moved horizontally and vertically by
turning and pressing the rotary pushbutton. Press the rotary
pushbutton to switch between the horizontal and vertical cross-
hair bars or deactivate this option. Using this option, you can,
for example, select a new destination page 109.Moving along the route. This function can be used while route
guidance is activated. Turn the rotary pushbutton clock-
wise/anti-clockwise to move the map along the current route.
Altitude display
Note
Did you know that you can choose from four different map types
page 118?
Applies to vehicles: with navigation system
In the driver information system
RETURN
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
Fig. 101 Display when
a lane change is
required
Fig. 102 Display when
a turn-off is required
Page 114 of 193
Navigation 112
After you have entered a destination or a route and have started the
route guidance, the navigation information is displayed in the driver
information system. If you select another function (e.g. radio) using
the multi-function steering wheel, the navigation will briefly be
replaced by the function selected page 128.
Distance to turn-off
Estimated time of arrival
Total distance to destination/next stopover
Name of motorway, major road or street you are driving on. An
arrow in front of the street name indicates that you are
supposed to turn into the street.
Arrow indicating a turn-off. A necessary lane change before the
turn is also displayed.
Bar graph. If an arrow is displayed, a bar graph will also appear.
The fewer bars are displayed, the shorter the distance to the
turn-off point.
WARNING
The route calculated by the navigation system is a recommenda-
tion of how best to reach a destination. Pay attention to traffic
lights, no stopping signs, lane change restrictions, one-way
streets, etc.
Note
An exclamation mark “!” in front of the street name indicates that
the navigation DVD does not contain all the information on this
street or street section. Pay attention to traffic rules such as one-way
streets or pedestrian zones.
Storing a destination
Applies to vehicles: with navigation system
In the directory (single destination)
A single destination can either be stored as a new entry or
added to an existing entry.
Important: You must have entered a single destination
page 107.
Storing a destination as a new entry
– Press the Memory control button.
– Turn the rotary pushbutton to Store in directory and
press to confirm.
– Turn the rotary pushbutton and select New entry.
– Press the rotary pushbutton. An entry space will now
appear fig. 103.
– Turn the rotary pushbutton to Surname and press the
rotary pushbutton. The speller will appear on the MMI
display page 43.
– Enter the surname using the speller.
A1
A2
A3
A4
A5
A6
Fig. 103 Address card
Page 115 of 193
Navigation113
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Enter additional information.
– For quick access to a destination, place a tick next to
Display as top destination by turning and pressing the
rotary pushbutton. Top destinations are listed in the
destination entry screen page 105, fig. 91 and can be
selected directly.
– Turn the rotary pushbutton to Store entry and press to
confirm.
Storing a destination in an existing entry
– Press the Memory control button.
– Turn the rotary pushbutton to Store in directory and
press to confirm.
– Turn the rotary pushbutton to Find entry and press to
confirm. The speller will appear on the MMI display
page 43.
– Enter the name of the entry you are searching for, or
– Turn the rotary pushbutton to LIST and press to confirm.
A list of all stored directory entries will appear.
– Turn the rotary pushbutton to the entry you wish to select
and press the rotary pushbutton.
– For quick access to a destination, place a tick next to
Display as top destination by turning and pressing the
rotary pushbutton. Top destinations are listed in the
destination entry screen page 105, fig. 91 and can be
selected directly.
– Turn the rotary pushbutton to Store entry and press to
confirm.If a navigation destination is already stored in an existing address
card, the new destination will automatically overwrite the old one.
Note
•You can call up the address card to make further entries via the
function Edit directory.
•For information on how to manage the directory, please see
page 80.
Applies to vehicles: with navigation system
Route
Calculated routes with specific criteria can be stored and
loaded later as a new navigation destination
Important: You must have entered a route plan page 108.
– Press the Memory control button.
– Turn the rotary pushbutton to Store route.
– Press the rotary pushbutton. The speller will appear on
the MMI display page 43.
– Use the speller to enter a name for the route plan you
want to store.
–Turn the speller to OK and press the rotary pushbutton.
The route plan you entered will be stored.
If the function Store route appears in grey lettering, the route
memory is full. In this case, delete any obsolete routes from the
memory page 117.
Page 117 of 193
Navigation115
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Press the rotary pushbutton. The top category destina-
tion will be set as the final destination or as a stopover.
– Start the route guidance by turning the rotary push-
button to Start route guidance and then pressing the
rotary pushbutton. The route criteria and subsequently
the map page 110 will be shown on the MMI display.
An arrow will appear in the display of the driver informa-
tion system.
Note
To update the list of top categories, exit the list by pressing the
button and select the same category again.
Applies to vehicles: with navigation system
Loading from the directory
Important: The navigation mode must be activated
page 105, and a navigation destination must be stored in
the directory page 84.
– Press the Memory control button.
– Turn the rotary pushbutton to Load from directory.– Press the rotary pushbutton. A list of entries fig. 105
will appear in the MMI display.
– To select a destination from the list turn the rotary push-
button to mark the entry and press to confirm, or
– To find an entry, turn the rotary pushbutton to Find entry
and press to confirm. You can now search for a name
using the speller.
– Start the route guidance by turning the rotary push-
button to Start route guidance and then pressing the
rotary pushbutton. The route criteria and subsequently
the map page 110 will be shown on the MMI display.
An arrow will appear in the display of the driver informa-
tion system.
Applies to vehicles: with navigation system
Route
Routes that have been stored previously can be loaded as
a new navigation destination.
Important: The navigation mode must be activated
page 105, a route must have been stored page 113,
and the system must be set to Route with stopover
page 105.
– Press the Memory control button.
– Turn the rotary pushbutton to Load route.
– Press the rotary pushbutton. A list of entries will appear
in the MMI display.
– To select a route from the list turn the rotary pushbutton
to mark a route and press to confirm.
RETURN
Fig. 105 Loading desti-
nation from directory
Page 119 of 193
Navigation117
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Applies to vehicles: with navigation system
Deleting a route
– Select: Function selector button > control button
Memory > Delete route.
Stored route plans (routes with stopovers) will now be deleted.
Applies to vehicles: with navigation system
Changing a route plan
A route plan (Route with stopover) can be changed, moved, deleted
or set as a destination again. Simply use the rotary pushbutton to
select the destination or a stopover on the route plan and then press
the rotary pushbutton. Then select one of the options displayed.
If you delete the destination, the last stopover will automatically be
set as the new destination.
Applies to vehicles: with navigation system
Route list
– Select: Function selector button > control button
Route > Route list.
The route list is only visible when the route guidance is active and
contains the following information:
•Details of the route
•Distances
•Street names
•Town and place names
Applies to vehicles: with navigation system
Route criteria
– Select: Function selector button > control button
Route > Route criteria.
The route will be calculated according to various criteria.
Dynamic navigation
The dynamic navigation function optimises a route plan by using
the most current traffic reports to automatically recalculate routes
and avoid traffic jams.
If the navigation does not display a detour route, although the
dynamic navigation function is ON and a traffic jam has been
reported on the planned route, this is because the estimated time
required for the detour is longer than the estimated time required
for remaining on the route with the traffic jam.
Route options
The navigation system selects the faster or shorter route.
Motorway / ferry / toll road
If you do not want the navigation system to include motorways,
ferries or toll roads in the route calculation, you can set the option
avoid. However, there can be situations in which you will not be able
to avoid them.
Note
If one of the selected criteria is unavoidable (i.e. the route must
contain the undesired criterion), the system will automatically
calculate the route accordingly.
NAV
NAV
NAV
Page 121 of 193
Navigation119
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control Direction of travel
The map is set to face the direction of travel. If the map scale is
between 50 m and 50 km, the map will rotate according to the direc-
tion of travel.
Auto
If the scale is less than 2.5 km, the map is set to face the direction
of travel. If the scale is more than 2.5 km, the map is set to face
north.
Applies to vehicles: with navigation system
Intersection zoom
– Select: Function selector button > function
selector button > Intersect. zoom.
When the intersection zoom function is activated, any intersection
will be zoomed in on automatically. This provides a detailed view,
giving you a better perspective of the road layout. When zooming,
the map will automatically be set to face the direction of travel.
Applies to vehicles: with navigation system
Map type
– Select: Function selector button > function
selector button > Map type.
Destination
The map shows you the destination. The destination is marked with
a chequered flag. The map is set to face north.
Position
The map depicts the vehicle's current location. The map scale and
map orientation settings are not changed.Overview
The entire route from the starting point to the final destination is
displayed on the map. The map scale varies according to the length
of the route. The map is set to face north.
Current position 3D
The map is shown in a 3D perspective (as seen from the current loca-
tion). The map is set automatically to face the direction of travel
page 118.
Applies to vehicles: with navigation system
Map content
– Select: Function selector button > function
selector button > Map content.
The display of map contents such as motorway exits or restaurants
can be switched on () and off.
Applies to vehicles: with navigation system
Voice guidance
– Select: Function selector button > function
selector button > Voice guidance.
You can switch the voice guidance cues on and off as desired.
Select the setting off (phone) to deactivate the spoken navigation
information only for the duration of a telephone call.
Applies to vehicles: with navigation system
Altitude display
– Select: Function selector button > function
selector button > Altitude display.
NAV
SETUP
NAV
SETUP
NAV
SETUP
NAV
SETUP
NAV
SETUP
Page 123 of 193
Calling up traffic information121
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Calling up traffic information
Introduction
If desired, your MMI system will inform you about the current traffic
situation both on the screen and audibly.
You are probably familiar with the traffic reports that most radio
stations transmit at regular intervals. Your MMI system automati-
cally records these reports page 121 for up to an hour after the
MMI has been switched off. The Traffic Programme reception is indi-
cated by the TP symbol when the radio, the CD player or the Audi
music interface*
21) is switched on page 58.
In addition, more and more radio stations transmit traffic messages
that are received automatically and inaudibly by your MMI system.
You can set the system to display these messages on your MMI
display. Another even more convenient function is that the MMI
system uses these reports when the dynamic navigation function is
activated to guide you around traffic obstructions such as conges-
tions whenever possible page 117.
The reception of traffic messages is indicated by the TMC symbol at
the top of the display when the navigation mode is activated:
Calling up traffic reports (TP memo)
Traffic reports are stored along with the station name and
the time of transmission.
Important: The Traffic Programme function must be
switched on page 58.
– Press the function selector button marked .
21)Still under development at the time of printing.
TMC symbolsExplanation
TMC symbol litTMC stations are available and the dynamic
navigation is switched on page 117.
TMC symbol not
litTMC stations are available; the dynamic navi-
gation is switched off.
TMC symbol
crossed outTMC stations are not available; the dynamic
navigation is switched on.
TMC symbol
is not displayedTMC stations are not available; the dynamic
navigation is switched off.
Fig. 106 List of traffic
reports
INFO
Page 125 of 193
Calling up traffic information123
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Important: The system must be tuned to a traffic station
page 122, and a navigation DVD must be inserted in the
drive page 14.
– Press the function selector button marked .
– If the list of traffic messages page 122, fig. 108 does
not appear in the MMI display, press the function
selector button again. A list of traffic messages
page 122, fig. 108 will now appear in the MMI display.
– Turn the rotary pushbutton to mark an entry.
– Press the rotary pushbutton. Traffic information on the
entry will now be displayed.
– To display the next traffic message in the detail view, turn
the rotary pushbutton to Display next report and press to
confirm.
– To display the selected message on the map in the detail
view, turn the rotary pushbutton to Show report on map.
– Press the rotary pushbutton. The red hatched line shows
the stretch of road affected by the traffic obstruction
fig. 109.– To display the next traffic message on the map, press the
rotary pushbutton again.
When the route guidance is active, the TMC traffic messages which
are relevant for your route are shown with a red warning symbol and
are sorted by distance to your current location page 122,
fig. 108. A traffic obstruction in the immediate vicinity will be shown
at the top of the list.
All other traffic messages are then shown with greyed-out warning
symbols and are sorted according to road category (motorways,
major roads, other roads) and road number.
Urgent traffic messages such as a car travelling in the wrong direc-
tion on the motorway are automatically displayed in the MMI
display. To cancel the report, simply press the button or
the rotary pushbutton.
When the route guidance is active, traffic messages are shown with
red warning symbols and are sorted according to road category
(motorways, major roads, other roads) and road number.
Other settings
Applies to vehicles: with TP memo timer
TP memo timer
– Select: Function selector button > function
selector button > TP memo timer.
You can set two times of day at which you want the MMI system to
record traffic reports. Use the Timer status option to activate and
deactivate the timers individually or together. You can set the time
by turning the rotary pushbutton to mark the timer and pressing to
confirm. Then turn the rotary pushbutton to change the time.
Switch from hours to minutes by pressing the rotary pushbutton.
Fig. 109 Displaying a
TMC traffic message
on the map
INFO
INFO
A1
RETURN
INFO
SETUP
Page 127 of 193
Calling up traffic information125
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control