wheel bolts AUDI R8 SPYDER 2011 Owners Manual

52 Convertible top
• Pull the convertible top all the way out in
the direction indicated @. Position the fins
upward at the same time.
• Press the convert ible top as far forward to­
ward the windshield frame as possible
c>fig . 55.
Have a second person assist when positioning
the convertible top. That person should stand
on the oppos ite side of the veh icle and per­
form the same steps.
A WARNING
-When positioning the conve rtible top,
avoid contact with the supports or other
moving parts. Otherw ise you could pinch
yo ur hands.
- When pressing the convert ible top down
onto the windshield frame, make sure
that you do not pinch yourself or anyone
else.
Step 6: Secure the convertible top
-
Fig. 56 Co nve rtible top storage bay: install ing the driv ­
e r
Fig. 57 Securing the conve rt ible top
The convertible top must be under tension to
secure it to the windshield frame . The wheel
wrench, dr iver and bolts from the vehicle tool
kit are required for this. Have a second person assist with this step
.
Tha t person should stand on the opposite side
of the vehicle and perform the same steps.
• Posit ion the driver @ on the bolt @ in the
front section of the convert ible top storage
bay and rotate clockwise to install in the
threads
c> fig. 56.
• Posit ion the wheel wrench © with the long
end on the driver @.
• Press the convertible top as far forward as
possible toward the windsh ield frame @
with one hand
c> fig. 57 . At the same time,
pull the fins upward @ for support with the
other hand.
• Now, grasp the fins with the hand that you
used to move the convertib le top forward
and hold the fins in this position . With the
other hand, turn the wheel wrench upward
until it stops @.
(0 Tips
-When pressing the convertible top for­
ward, make sure the locking pins are
seated in the latch on the windshield
frame and not on the frame itself.
- When pressing the convert ible top for­
ward, make sure the locking pins are
seated exactly in the latch on the wind­
shield frame and not on the frame itself
This is the only way that the convertib le
top can be latched correctly .

Step 7: Lock the convertible top

Fig. 58 Inner s ide of the conve rtible top: remov ing the
cap
Fig. 59 Inner s ide of the co nvertible top : pos ition ing
the Allen wrench
.. Remove the cap in the center of the conver­
tib le top using the screwdriver from the ve ­
hicle tool kit¢
fig. 58. The emergency lock­
ing mechanism is located behind it.
.. Insert the Allen wrench
(D and turn the bolt
to the left@ until it is tight and the conver­
t ibl e top is locked securely ¢
fig. 59.
.,. Remove the Allen w rench from the open ing
and cover the opening with the cap.
.,. Remove the wheel wrench from the conver­
tible top storage bay .
.. Close the convertible top storage bay lid.
A WARNING
Make sure the convert ible top is locked
correctly. Otherwise the wind from driving
could cause the convertible top to open.
This can result in injuries and damage to
the vehicle.
-
Convertible top 53
Step 8 : Secure the fins on the body
Fig . 60 Co nvert ible top: pressing t he fins downward
Fig. 61 Interior: t ighten ing the bolt
The following steps must be performed on
both sides of the vehicle .
.. Press the fin downward firmly
¢fig . 60.
.. Ho ld the fin in this position and tighten the
bolt above the seat belt -arrow-using the
Allen wrench from the veh icle tool k it at the
same time¢
fig. 61.
A second person should assist when securing
the fins to the body. Tightening the bolts is
much easier if a second person presses the
fins down.
A WARNING
-Make sure the fins lie on the body . Other-
wise the convert ible top will not lock se­
cure ly and it could open while dr iving. This
can resul t in injuries and damage to the
vehicle.
-

stickers on the inside of the rear window
over the wires.
- To he lp prevent dirt from scratching the
window, always scrape in a forward di­
rection -pus hing the scraper away from
you -never back and forth.
Weatherstrips
To seal properly, the weatherstrips around the
front lid, doors, eng ine compartment lid, etc .
must remain pliable . Spray the weatherstrips
with silicone or coat them with talcum pow­
de r or glyce rine to retain the flexibility of t he
r u bber and to protect them against free zing
in the winte r.
A WARNING
Always read and heed a ll WARNINGS and
the information
¢page 161.
@ Tips
Keep silicone sprays off the windsh ield to
avoid wiper smear in rain.
Wheels
Regular care is required to preserve the deco­
rative appearance of the wheels . Road sa lt
and brake dust must be washed off regularly
or the wheels w ill be damaged .
Use only special acid-free cleaning agents. Yo u
can find proper wheel cleaner at authorized
Aud i dea lers and specialty stores. Do not leave
the cleaner on the wheels longer than speci­
fied. Wheel cleaners containing acid can dam­
age the surface of the wheel bolts .
Paint polish or other abras ive materials must
not be used when caring for wheels. If the
protective coating has been damaged, from
stones for example, touch up the damage as
soon as possible .
A WARNING
-Moisture and ice on brakes may affect
braking efficiency-
¢page 153, Braking.
-
Cleaning and protec tion 165
Test the brakes carefully after each vehi­
cle wash.
- Always read and heed all WARNINGS and
the information
c:;, page 161.
Exhaust tail pipes
Road salt and other corrosive materials wi ll
damage the material in the exhaust tail pipes
if they are not cleaned regularly. Do not clean
the tail pipes with wheel cleaner, pa int polish,
ch rome polish or other ab ras ive cleaners.
Clean the tail pipes with car ca re p roducts
that are suitable fo r sta inless steel.
Your authorized Audi dea ler can provide clean­
ing products that have been tested and ap­
proved for your vehicle.
Care of interior
· Radio and navigation display
The display may be cleaned with a soft cloth
and commercially-ava ilable "LCD cleaner".
The cloth should be coated lightly when the clean ing solution when cleaning the display .
(D Note
To prevent scratches, only clean the dis­
play when it is dry.
Plastic parts and imitation leather
You can clean p lastic parts and imitation
leather with a damp cloth. If this does not re­
move the d irt, you can t reat these parts only
with special
so lvent-fr ee pl astic cl eaning and
care produ ct s.
A WARNING
""' ~
Solvents can change the properties of
some p lastics and make it harder for the
a irbag to deploy.
- Never clean the instrument panel or the
surface of Airbag modu les with cleaning
products that conta in solvents.
- Products containing solvents will make
the surface of this part poro us.
•
•

the wheel bolts. These are available from au­
thorized Audi dealers.
A WARNING
Using the wrong snow chains for your vehi­
cle or installing them incorrectly can in­
crease the risk of loss of control leading to
serious personal injury.
- Snow chains are available in different
sizes. Always make sure to follow the in­
structions provided by the snow chain
manufacturer .
- When driving with snow chains, never
drive faster than the speed permitted for
your specific snow chains.
- Always observe local regulations.
- Remove snow chains before driving on
roads not covered with snow to avoid
damaging tires and wearing the snow
chains down unnecessarily.
- Snow chains, which come into direct con­
tact with the wheel rim, can scratch or
damage it. Therefore, make sure that the
snow chains are suitably covered . Check
the position of the snow chains after
driving a few yards and correct if neces­
sary. Follow the instructions from the
snow chain manufacturer when doing so.
(D Tips
Where snow chains are mandatory oncer­
tain roads, this normally also applies to ve­
hicles with all-wheel drive.
Wheel bolts
Wheel bolts must always be tightened to the
correct torque.
The design of wheel bolts is matched to the
factory installed rims. If different rims are fit­
ted, the correct wheel bolts with the right
length and correctly shaped bolt heads must
be used. This ensures that wheels are fitted
securely and that the brake system functions
correctly .
Tires and wheels 205
In certain circumstances, you may not use
wheel bolts from a different vehicle -even if it
is the same model
r:!> page 211.
A WARNING
Improperly tightened or maintained wheel
bolts can become loose causing loss of
control, a collision and serious personal in­
jury.
- Always keep the wheel bolts and the
threads in the wheel hubs clean so the
wheel bolts can turn easily and be prop­ erly tightened.
- Never grease or oil the wheel bolts and
the threads in the wheel hubs. They can
become loose while driving if greased or
oiled, even if tightened to the specified
torque.
- Only use wheel bolts that belong to the
rim being installed.
- Never use different wheels bolts on your
vehicle.
-Always maintain the correct tightening
torque for the wheel bolts to reduce the
risk of a wheel loss. If the tightening tor­
que of the wheel bolts is too low, they
can loosen and come out when the vehi­
cle is moving.
If the tightening torque is
too high, the wheel bolts and threads
can be damaged and the wheel can be­
come loose.
(D Note
The specified torque for the wheel bolts is
90 ft lb (120 Nm) with a tolerance of ± 7 .4
ft lb( ± 10 Nm). Torque wheel bolts diago­
nally. After changing a wheel, the torque
must be checked as soon as possible with a
torque wrench -preferably by an author­
ized Audi dealer or qualified workshop.
Low aspect ratio tires
Your Audi is factory-equipped with low aspect
ratio tires. These tires have been thoroughly
tested and been selected specifically for your model for their superb performance, road feel
and handling under a variety of driving
IJ>,
•
•

What do I do now? Trunk escape handle
Appl ies to vehicles: with trunk escape handle
In case of an emergency, the front lid can be
opened from the inside using the trunk es­
cape handle.
.. To open the front lid pull the handle.
The trunk escape handle inside the luggage
compartment is made of fluorescent mate ria l
to g low in the dark.
.&_ WARNING
The trunk escape handle is to be used only
in an emergency.
Breakdown kit
The breakdown kit consists of vehicle tool kit
and tire mobility system.
Fig. 154 Breakdown kit in luggage compartment
@ Vehicle too l kit
@ Tire mobility system¢ page 213
The breakdown kit is located in the luggage
compartment unde r the cargo floor .
The tool kit consists of the following items :
- Hook for removing hub cap
- Lug wrench
- Alignment pin for changing wheels
- Screwdriver w ith reversible blade
- T owing eye
- Jack* (not a vehicle component; contact your
authorized Aud i dealer if needed)
Before returning the jack* to its place, retract
the jack arm fully .
What do I do now ? 213
Note: some of the items listed above are pro­
vided on certain mode ls only or are optional
extras.
.&_ WARNING
- Never use the hexagonal socket in the
handle of the screwdriver to loosen or
tighten the whee l bolts .
- The jack* (available as a replacement
pa rt) is intended only for your vehicle
model. Under no circumstances use it to
lift heavy v ehicles o r other loads; yo u risk
inju ring yourse lf.
- Never start or r un the eng ine while the
veh icle is supported by the jac k*.
- If you must work unde r the vehicle, al­
ways use saf ety stands specifically de­
signed fo r th is purpose.
- Using a bumpe r jac k to ra ise the vehicle
wi ll damage the b umpe r system. The
jack may slip, ca using injury.
Tire repair
General and safety pointers
Tire repair is intended only for temporary,
short-term use .
Fig. 155 Ti re damage for which the Tire Mob ility Sys ­
tem is not suited
-
Your vehicle is equipped wi th a tire repa ir k it,
the
Tire M obility Sy ste m (TMS ).
In the event of a t ire failure, the TMS is in the
luggage compartment under the floor.
It con ­
s ists of the tire sealan t an d a n elec tric air
pump.

216 What do I do now?
• Switch the electric air pump off - switch in
position
0. If the required tire pressure of at
l east 1.8 bar has not been reached, it is not
poss ible to make a repa ir with the tire seal­
ant. Seek professional ass istance.
Di sas sembling T ire Mobilit y Sy stem
• Remove the hose from the valve and pull the
plug out of the socket.
• Screw the dust cap onto the valve.
• Place the empty sealant bottle back in the
original packaging and clip it in place under
the floor so that no tire sealant can run out into the vehicle .
• Start driving right away so that the sealant
is d istr ibuted in the tire.
.&_ WARNING
- Follow the manufacturer's safety instruc­
tions on the deca l for the air pump and
the sea lant bott le .
- If a tire pressure of 1.8 bar cannot be
achieved after pumping for S minutes,
the tire is too severely damaged. Do not continue to drive.
- Seek professional assistance if it is not
poss ible to repair the tire with the tire
sealant.
(D Tips
- Do not operate the electric ai r pump for
more than 8 min utes without stopping,
otherwise it can overheat. When the air
pump has cooled down, you can continue
to use it.
- If sealant has escaped, allow it to dry, then you can peel it off.
Final check
After driving for a short distance, t ire pressure
must be checked .
• After driving for about 10 minutes, stop and
check the t ire pressure.
• If tire pressure is still at least 1.3 bar, in ­
flate the t ire to specified pressure (see driv­
er's side B-pillar), dr ive to the next repair shop and have the tire and the sealant bot
­
tle replaced.
• If tire pressure is less than 1.3 bar, the t ire
is too severely damaged. Do not continue to
drive . Seek professional assistance.
.&_ WARNING
If t ire pressure is less than 1.3 bar after
d riving for 10 minutes, the t ire is too se­
ve rely damaged. Do not cont inue to drive.
See k professional ass istance.
(D Tips
After a tire repair, have the sealant bottle
r eplaced at a dealership. This restores full
funct ionality to the T ire Mobility System .
What should I be
aware of when
changing a tire?
Tires with unidirectional tread design
-
Tires with unidirectional tread design mu.st be
mounted with their tread pattern pointed the
right direction.
A un idirectional tire can be identified by ar­
row s on the sid ewall , which point in the di rec­
t ion of the rota tion. Yo u m ust follow the
speci fied direction o f rotation. This is necessa­
ry in order for these tires to develop t heir op ­
timum characteristics regarding grip, road
noise, wear, and hydrop lan ing .
· Anti-theft wheel bolts
A special adopter is needed to turn the anti­
theft wheel bolts.
Fi g. 158 Anti-theft wheel bolts w it h adapte r

218 What do I do n ow ?
-On hard, slippery sur face (such as tiles)
use a rubber mat or similar to prevent
the jack from slipping.
- To help prevent injury to yourself and
your passenge rs:
- Do not raise the vehicle unti l you a re
sure the ja ck is sec urely engaged.
- Passenge rs must not rema in i n the ve­
h icl e when it is ja cked up.
- Make sure t hat passengers wait in a
safe p lace away from the vehicle and
well away from the road and traffi c.
- Make sure jack position is correct , ad­
just as necessary and then continue to ra ise the jack.
CD Note
A floo r jack or the pads on the hoist arms
m ust
n ot be posit ioned at the points
shown
-arrows-.
Remov ing the wheel
Follow these instructions step-by-step for
changing the wheel.
F ig . 161 Wh eel ch an ge : alignment pin in side the t op
hole
After you have loosened all wheel bolts and
ra ised the vehicle off the ground, perform the
following steps to remove and rep lace the
wheel :
Removing the wheel
" Use the
hexagon al socke t in the screwdri v­
e r handle
to comp letely turn out the top­
most wheel bolt and set it as ide on a
clean
surface . "
Sc rew the threaded end of the
al ignment
pin
from t he tool kit hand-tight into the
now vacant bolt ho le
c::> fig . 161.
" Then completely unscrew the other wheel
bolts as described above.
" Take off the whee l leaving the a lignment pin
in the bolt hole
c::> (D .
Putting on the wheel
"Lift the spare whee l and carefully s lide it
over the alignment p in to guide it in place
c::> (D .
" Use the hexagonal socket in the screwdriver
ha ndle to screw in and tighten a ll whee l
bolts
slightly .
"Unscrew the alignment p in and inse rt and
tighten the rema ining wheel bolt slightly
like the rest.
" Turn the jack hand le counter-clockwise to
lower the vehicle until the jack is fully re­
leased.
T he wheel bo lts must be clean and turn easily.
Check the contact s urfaces of whee l and hub .
Remove contaminants on these surfaces be ­
fore insta lling the wheel.
T he hexagonal socket in the screwdriver han­
dle makes it easier to handle the w heel bo lts.
The reversible blade shou ld be removed .
When mounting
u nidire ctional ti res, observe
the d irection o f rotation
c::> page 216.
CD Note
When remov ing or inst alling the whee l,
t he r im cou ld hi t the b ra ke ro tor and dam­
age the rotor . Work caref ully an have a
second person help you.
(D Tips
Never use the he xagonal socket in the han­
dle of t he screwdriver to loosen or tighten
the wheel bo lts .

Tightening wheel bolts
.,. Fit the wh eel b olt wrench ove r the wheel
bolt and push it down as far as it will go
1l.
.,. Close your grip around the
end of the
wrenc h handle fo r maximum torque and
turn each wheel bolt
clockwi se u nti l it sits
t ight.
H ave the
tightening torque of the whee l bolts
checked as soon as possible with a torque
wrench . It shou ld be 120 Nm.
Chec k the
tire pre ssure as soon as possible.
Return the vehicle tool kit to its proper place.
A WARNING
Loose ning t he wheel bo lts is prohib ited;
da nger of an accident!
@ Tips
- Never try and use the hexagona l socke t
i n the handle of the screwdr iver to loos­
en or tighten the w heel bolts.
- If yo u have dete rm ined t hat wheel bolts
a re cor roded and difficult to t urn, the
bo lts must be rep laced befo re checking
the to rque.
- Unti l the tig hte ning torque is checked,
d rive at redu ced speeds as a pre caution.
Notes on wheel change
Pl ease read the information¢ page 199, New
tires and replacing tires and wheels,
if you are
going to use a spare tire which is different
from the tires on your veh icle.
Afte r you change a tire:
- Check the tire pressure on the spare imme­
dia tely after mounting.
- Have the whee l bolt t ightening torque
chec ked w ith a torq ue wrench as soon as
poss ible by your author ized A udi dealer or a
qu alified service sta tion.
1 ) You need th e appropr iate adapter to tighte n the a nti­
t h eft wheel bolts
c:, page 216.
What do I do now? 219
- With stee l and alloy whee l rims, the whee l
bolts are correctly tightened at a torque of
90 ft lb (120 Nm) .
- If you notice while changing a tire that the
wheel bo lts are corroded and difficu lt to
turn, then they should be rep laced before
you check the tightening torque.
- Replace the flat tire with a new one and
have it installed on your vehicle as soon as
possible. Remount the wheel cover.
Until then , d riv e with e xtra care and at re­
duced speeds.
A WARNING
- If you are going to equ ip your vehicle
with tires or rims which differ from those
which were facto ry installed, then be
sure to read the information ¢
page 199,
New tires and replacing tir es and
wheels.
- Always sto re the tools secu rely in lug­
gage compartment. Othe rwise, in a n ac­
cident o r su dden maneuver they cou ld fly
forwdrd, CciU5ing injury to pd55enger5 in
the vehicle.
(D Note
Do not use comme rcially avai lab le tire
sea lants. Otherwise, the e le ctr ic al com po­
nen ts of t he tire p ressu re monitoring sys­
tem * wi ll no longe r work proper ly an d the
sensor fo r the tire pressure mon itor ing
system will have to be rep laced by a quali­
fied wor kshop.
Jump-starting
General
If necessary, the engine can be started by
connecting it ta the battery of another vehi­
cle.
If the engi ne should fail to start because of a
discharged or weak battery, the battery ca n be.,.. •
•

230 Index
A
A/C operation ................. .... .. 75
ABS
refer to Anti-Lock Brake System . .. .. . 150
A cces sories . . . . . . . . . . . . . . . . . . . . . . . . 211
Active rollover protection system . .. ... 107
Retracting rollover protection ... .. ... 107
Adding
Eng ine coolant ... ..... ... .. .. .. .. .
183
Eng ine oil .. .. . ... ... .. .. .. .. .. .. . 180
Addit ional accessories .. .... .... .. .. . 211
Additives .................. ... .... . 180
Adjustable steering column ...... .. .... 77
Adju sting front sea ts ....... .. .. .. .. . .
66
Advanced Airbag System
Children ... ............... .. .... .
139
Compon ents ................ ..... . 124
Front ai rbags . . . . . . . . . . . . . . . . . . . . . 122
How the component s work togethe r .. 125
Mon ito ring . .... .. ... .. .. .. .. .. .. . 128
Weight-sen sing mat .. .... .. .. .. .. . 139
Airbag system . . . . . . . . . . . . . . . . . 117, 136
Car e ... .. .. ................ ..... . 130
Child restraints .. .. ... ...... .. .. .. .
140
Components (fron t air bags) .. .. .... . 124
Danger of fitting a child safety seat on
the front passenger seat . . . . . . . . . . . .
119
Disposal ............. ........ .... 130
Front airbags ... .. ... .... .. .. .. .. . 121
H ow do the front airbags work? . .... . 126
How many airbags does my vehicle
have? .................... .. .... .
124
Important safety instructions on the
knee airbag system ....... .. .. .. .. .
134
Important things to know . . . . . . . . . . . 117
Indica tor ligh t .... .... ..... .. .. .. . 128
Knee airbags ... ... .... ..... .. .. .. . 132
Monitoring ................. ... ... 128
PASSENGER AIR BAG OFF light . . . . . . . 128
Service .. ...... .. ... .... .. .. .. .. . 130
Side airbags ..... .. .. .... .. .. .. .. . 135
Warning/indicator light ..... ... .... .. 17
When must the system be inspected? . 128
Air cond itioning
A/C operation . .... .... ..... .. .. .. .. 75
A ir distribution .... ....... .. .. .. .. ..
74
Air recirculation mode ......... .... .. 75 Automatic mode
.............. .... . 75
Controls . . . . . . . . . . . . . . . . . . . . . . . . . .
72
Defrost ..... .. .. .. .............. .. 75
E conomi cal use .. ....... ..... ..... .
76
Fan .. .... .. .. .. ...... ... .... .... . 74
Rear window defogger . . . . . . . . . . . . . . . 76
Switching on and off .... ......... .. . 74
Temperature ... ............ ........ 73
Air d istribution . . . . . . . . . . . . . . . . . . . . . . 7 4
Air recirculation mode Air condit ioning . ................. .. 75
All-wheel drive .. ............ .......
155
Winter tires . .. .. ... .. ..... ... .... 203
Anti-free ze
refer to Engine cool ant system ... .. .. 181
Anti-Lock Brake System .......... .... 150
Warning/indicator light ............ .. 18
Anti-Slip Regulation System .. .... .... 150
Anti- theft alarm system ... .... ... .... . 43
Anti-theft whee l bolts .............. . 216
Ashtray ........... .... ........... .. 69
ASR
refer to An ti-Slip Regulation System .. 150
Asterisk .... .. .. .. .. ................ . 6
Audi magnetic ride ................. ..
82
Description . . . . . . . . . . . . . . . . . . . . . . . . 82
Wa rning/ind icator light ... .. .. .. .. .. . 15
Aud i Servi ce Repa ir Manuals and Li te ra-
ture ........ ... .. .. ... ....... .... .
209
Automated manua l transmission
ref er to R tronic . ................. .. 85
Automat ic be lt retractor ...... .. ... .. 112
Autom atic car w ash
refer to Washing ........... ....... 16 1
Automatic headlight ................. 55
Automat ic headl ight control ...... .. .. .
62
Automatic headlight s
Defective . . . . . . . . . . . . . . . . . . . . . . . . . 3 5
Auto Safety Hotline ............. ....
105
Average fuel mileage . . . . . . . . . . . . . . . . . 23
Aver age speed . .. .. .. ..... .. .. .. .... . 23
B
Battery ..... ..... .. ............... 184
Cha rging .. .. .. .. ...... .. .. ... .... 186
Checking . . . . . . . . . . . . . . . . . . . . . . . . . 184

238 Index
Tire pressure monitoring system ...... . 206
Loss of air pressure . . . . . . . . . . . . . . . . . 34
Malfunctions . . . . . . . . . . . . . . . . . . . . . . 34
Sensors .. ............... .. .. .... . 201
Tires and wheels ......... .... .... . 201
Valves ... .. ................ ... ... 201
Warning/ indicator light .... .. .. .. .. . . 15
Tire repair kit .............. ... .... . 213
T ires .. .. ...... ........... .. .. .... . 189
Pressure ... ............. .... .. .. . 206
Replacing . . . . . . . . . . . . . . . . . . . 199, 201
Service life ............... ... .... . 198
Speed rating letter code ........... . 200
Tire manufacturing date ... .. .. .. .. . 200
Tire pressure monitoring system ..... 206
Tire specifications ......... ... .. .. . 200
Tread depth .. .. ...... .... ... .. .. . 198
Uniform tire quality grading .. .. .. ... 203
W inter t ires ............. .. .. .. .. . 203
Tires/Wheels Low aspect ratio t ires .... .. .. .. .... . 205
Tires and vehicle load limits ... ..... .. . 196
Tires and wheels Check ing tire pressure ......... .. ... 195
Cold t ire inflation pressure . .. .. .. .. . 193
Dimensions ............... ... .... . 199
General notes .............. .. .... . 189
Glossary of tire and loading termino lo-
gy .. .. .. ................. .. .... . 190
New tires and wheels ...... .. .. .... . 199
Replacing ............... ........ . 200
Snow chains .............. ... .. ... 204
T ire pressure monitor ing system .. .. . 201
Tires and vehicle load limits .. .. .. .. . 196
Wheel bolts ............. .... .... . 205
W inter t ires .. ........... .. .. .. .. . 203
Tire service life ................ .. .. . 198
Tool kit ..... ................ ..... . 213
Touch-up paint ............ .. .. .. .. . 164
Towing Tow truck procedures ...... .. .. .. .. . 222
T . l owing oop ................. .. .... .
222
Transport Canada ... ..... .. .. .. .. .. . 106
Tread Wear Indicator (TWI) .. .. .. .. .. .
198
Trip computer . . . . . . . . . . . . . . . . . . . . . . . 22
Trip odometer .............. ... .. ... . 12
Turn signals . ................. ..... .. 58 Turn
Signals
Warning/indicator lights ............. 16
u
Unfastening safety belts
Unidirectional tires ........ ...... .. . .
Uniform tire quality grading ....... .. . 114
189
203
Universal Radio-Frequency Remote Control
(HomeLink®) .... .. ............. .... . 95
Unlocking .. ... ... .. .............. .. 40
Power locking system ........... ... . 40
V
Vanity mirror . . . . . . . . . . . . . . . . . . . . . . . . 59
Vehicle-care products ................ 161
Vehicle electrical system . . . . . . . . . . . . . . 17
Vehicle Identification Number (VIN) .. .. 226
Vehicle jack . ...... ............. .... 217
Vehicle literature .. ................ ...
5
Vehicle tool kit .... ................ . 213
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . 72
Voltmeter display . . . . . . . . . . . . . . . . . . . . 13
w
Warning/indicator lights ......... .... . 10
Airbag system . . . . . . . . . . . . . . . . . . . . . 17
Anti-Lock Brake System . . . . . . . . . . . . . . 18
Audi magnetic ride .............. ... . 15
Brake system . . . . . . . . . . . . . . . . . . . . . . 17
Cruise control . . . . . . . . . . . . . . . . . . . . . . 17
Electronic differential lock (ED L) .. .. .. . 18
Electronic power control (EPC) . . . . . . . . 15
Electronic stabilization program (ESP) .. 16
Generator . . . . . . . . . . . . . . . . . . . . . . . . . 17
High beam . ..... ................ .. 16
Rear spoi ler ..... ............. ..... 16
Safety belts . . . . . . . . . . . . . . . . . . . . . . . 17
Tire pressure monitoring system . .. .. . lS
Turn signals . .. .. ..... ......... ... . 16
Warning lights . . . . . . . . . . . . . . . . . . . . . . 14
Red symbols in the center display . .... . 30
Yellow symbols in the center display .. . 30
Warranty coverages ................ . 209
Washing ...... ... ................ . 161
Folding top cleaning ... .. .. .. .. .. .. 163