start AUDI S3 SEDAN 2018 Repair Manual

LL co .... N
" N .... 0 N > co
• Enter your myAudi user data. Or: enter your
e ight-d igit myAudi PIN .
• Confirm your entry with OK.
Then you can open your persona l settings from
your myAudi account in your vehicle .
(D Tips
You can receive your my Aud i PIN if you have
set up a myAudi account. For additional infor ­
mat ion, see www.audiusa .com/myaudi.
Opening Audi connect
(Infotainment)
A ppl ies to veh icles w ith A ud i con nect (Infotainment)
_________ A _o _d _, _c _o _" _" _°"' _ t·_A
_ ,1_ ,_ •_ r_, _ ,_ •_ •_____ _ ,
:· . l : ~
I;;~ .,_lJre,; --· (. '
44 ,6 °F .:;·, .44 6 F
J ;9 O nline dest inations
.,. ,', ': . 37 r-·~·· -1
~ Online traffic information =
Fig. 181 Aud i co nn ect (Infot ainm ent) home p age
• Select : the I M ENU ! button> Audi connect .
• If necessary, confirm the note displayed with
Accept .
A list of all of the available Audi connect Infotain­
ment services is shown in the Infotainment sys­
tem display
r::;, fig. 181 .
You can also filter the Audi connect Infotainment
services by category:
• Select : I MENU I button > Audi connect> left
control button > for example,
Navigation for
the Audi connect Infotainment services in the
navigation menu
r::;, page 193 .
Audi connect
Infotainment services
Basic functions
A pplies to vehicles w ith A ud i con nect (Infota inme nt)
If available, functions specific to certa in services
are in the selection menu of that particular Aud i
l) Not avail able in all lang uag es .
Audi connect (Infotainment)
connect Infotainment service r::;, page 156. The
basic functions are in the corresponding options
menu:
• Select: ! MENU I button> Audi connect> desired
Audi connect Infotainment service>
right con­
trol button .
Depending on the Audi connect Infotainment
service selected, the following basic functions are
available:
Save as preview*
You can also see a preview of the selected Audi
connect Infotainment services on the Aud i con­
nect Infotainment home page
(Dr=;, page 191,
fig . 181.
Show on map
You can show selected contents on the map and
use them for route guidance.
Login
Seer::;, page 190, Logging in to myAudi in the vehi­
cle .
Read out1>
You can allow the MMI to read out the selected
contents .
Call*
If a phone number was assigned to an entry , you
can call the number, for example to reserve tick­
ets.
Start route guidance
If a c ity was added to an entry, such as for City
Events ,
you can use it as a navigation destina­
tion. Route gu idance sta rts immed iate ly .
Change search area
The set search area can be changed at any time .
Additional information on search areas can be
found under
r::;, page 204.
191

Audi connect (Infotainment)
Troubleshooting
Applies to vehicles with Audi connect (Infotainment)
Problem Solution
Audi connect Infotainment serv·
Some Audi connect Infotainment services must be activated/con-
ices: individual Audi connect Info- figured through your personal myAudi account before using
ta inment serv ices are grayed out or them for the first time. You can find deta iled information on line
not available . atwww.audiusa.com/myaudi.
Wi-Fi hotspot : it is not possible to Delete all existing Wi-Fi connections on your mobi le device and
connect through Wi-Fi. restart it.
198

Audi conn ect e-tron ser vic es
Vehicle status report
Applies to: vehicles with Audi connect e-tron services
You can access various vehicle statuses using the
services, such as:
- high-voltage battery charge level ,
- electric range,
- mileage,
- next inspection.
F or additional information, s ee
¢ page 95, Power
meter overview
and ¢ page 97, Range display.
A WARNING
Do not ignore messages and warning or indi­
cator lights that turn on in the vehicle be­
cause of the information in the status report.
Th is could lead to break downs in on the road,
accidents and se rious injuries.
Car Finder
Applies to: vehicles with Audi connect e-tron services
The vehicle collects data under certain conditions
and sends it to a server .
When data is stored, you can access values such
as these us ing the service:
- Vehicle location disp lay,
- Display of one's own location,
- Ro ute to your veh icle.
If your mobile device also has a nav igation func­
tion, you can navigate to your last know n parking
locat ion.
@ Tips
- The new parking location cannot be deter­
mined with this service if the vehicle is
moved after shutt ing the veh icle
off and
wi thout sw itching the ign ition on and
off
again, for example when be ing towed o r if
the vehicle is stolen .
- If the vehicle is moved an d shut
off again
us ing the second key, for example, the new
parking location is t ransmitted to the server
after switching the ignition off .
200
Charging
Applies to: vehicles with Audi connect e-tron services
You can control and access the hig h-voltage bat ­
tery c harging proc ess r emotely using these serv ­
i ces. You have the following options:
- check the battery charge leve l,
- star t/end t he cha rging process,
- prog ram the charging t imer with/w itho ut cl i-
mate cont rol,
- deactivate/activate the cha rg in g timer .
Fo r addi tional information,
see ¢ page 106,
Charging the battery with the Audi e-tron charg­
ing system .
A WARNING
Only perform charging f unctions on the high­
voltage battery if the vehicle is shut
off co r­
rect ly, is connected to a suitable socket and if
the ign ition is swi tched off.
Temperature control
Applies to: vehicles with Audi connect e-tron services
You can contro l the climate control in your vehi­
cle remotely using these services:
- start/end climate control ,
- program the timer,
- deactivate/activate the timer.
For addi tional informa tion, see
¢ page 116, Cli ­
mate control .
A WARNING
Only perform the climate control functions if
your vehicle was shut
off correct ly and the ig­
n ition is switched off.

Navigat ion
-If avai lab le, confirm the input suggestion* to
complete the entry or a word suggestion*. See
¢ page 161 , Letter/number speller.
- Turn the control knob to the rig ht to change
the results list.
- Se lect and confirm a destination from the re -
su lts list .
- Se lect and confirm
Start rout e guidance .
The route d isplays as an ove rview in the map.
Route g uidance is a lready act ive.
Na rrow ing the se arch area
All countr ies/states are se lected at the factory
for the free text search.
- Se lect the right control button >
Country /state
selection
i n the input field (D ¢ page 201,
fig. 182.
- Se lect the country or state ( • ) that shou ld be
searched for in the free text search in order to
narrow the number of results and increase the
search speed. The selected entry in the coun­
try/state se lection is sto red .
Or : select All
countrie s/ state s.
(D Tips
- The MMI input suggest ions depend on the
l ast navigated destinations .
- Up to 50 entries ca n be sto red in the last
dest inat ions list.
- Additional informat io n on free text searches
ca n be found unde r
¢page 162.
Loading previous destinations
App lies to: ve hicles w ith navigation system
Your last destinations are automatically stored
and can be loaded directly as a destination .
Requirement: a destination was already navigat­
ed to.
~ Press the I NAV/MAPI button repeated ly until
the
Enter destination menu is displayed
¢ page 201, fig . 182.
Your last destination is listed direct ly in t he Enter
de stination
menu under the home add ress and
ident ified with the
symbol @¢ page 201,
fig. 182.
202
- Select and confirm one of the last destinations
from the list .
- Select and confirm
Start route guidance.
D eleting previous destinations
- Select one of the last destinations from the list.
- Select: r ight control button>
Delete destina-
tion
> Del ete this last de stination or Delete all
last destinations.
The selected destinat ion or all last dest inat ions
i s/are deleted and no longer d isplayed in the
En­
ter destination
men u.
Entering an address
App lies to: vehicles wit h navigat ion syste m
As an alternative to free text search, you can al­
so enter an address in stages .
~ Press the I NAV/MAPI button repeatedly until
the
Enter destinat ion menu is displayed
¢page 201, fig . 182 .
~ Select: left control button > Enter address .
- Ente ring a destination using a country /state :
select and confirm Country . Select and confirm
a country/state d irectly from the list .
Or :
search for a co unt ry/state us ing the input f ield .
-Entering a de stination u sing the City /ZIP
code :
select and confirm City/ZIP code . Enter a
city or a ZI P code .
Or: select and co nfirm a city
from the list.
- Select and confirm additional details about t he
destination s uch as
Street , Hou se number or
Downtown .
- De stination entry using a street intersection *:
Requirement: you must ente r a street. Select
and co nfirm
Int erse ction . Selec t and confi rm a
s tr eet directly from the list.
Or : search for a
s treet us ing the inp ut fie ld .
- Sele ct and confirm
Start route guidance .

LL co ..... N
" N ..... 0 N > co
Setting a home address/favorite as the
destination
Ap plies to: ve hicles wit h nav igation system
You can quickly and easily start route guidance
to your home address using the home address
function. Favorites allow easier access to fre­
qu ently used destinations .
.. Press the I NAV/MAPI button repeated ly un til
the
Enter de stination menu is displayed
¢ page 201, fig. 182 .
Setting a home address as the destination
Requirement: a home address must be stored
¢page 207 .
Your Home address is shown d irectly in the Enter
de stination
menu @Q page 201, fig . 182 .
-Se lect : Home address > Start route guidan ce .
Setting a favorite as the destination
Req uiremen t: a f avorite must be stored as a des ­
tination
¢ pag e 208 .
- Ente r at leas t the first three lette rs of the de­
s ir ed favorite in the free text search inp ut fie ld.
T he f avorites found are shown in the Info tain­
ment system
display @) ¢pag e 201, fig . 18 2.
- Se lect and co nfirm the desi red en try.
- Se lect and confirm
Start route guidance .
@ Tips
- Additional settings for the home address
can be found un der
¢ pag e 20 7.
- Additional settings for the favorites can be
fo und
u nder ¢ page 208 .
Naviga tion
Transferring a destination from the directory
Applies to: veh icles w it h navigat ion syste m
You can navigate dir ectly to destinations in the
direc tory.
Fig . 18 3 Possible di rec to ry/c onta cts
Requireme nt: an address with navigation data or
a nav iga tion dest inat io n m ust already be as­
s igned to a
contac t¢ page 208, Direc tory con­
tacts.
.. Press the I NAV /MAPI button repeatedly u ntil
t he
Enter destination men u is displayed
¢page 201, fig. 182.
.. Sele ct: left con trol bu tton > Dire ctory > a con-
tact .
The di rectory/con tac ts are shown in a lphabe tical
order and are marked with symbols to indica te
the storage locat ion:
@ B usiness add ress
@ Private add ress
@ Bus iness destination
@ Pr iv a te des tination
- Select and confirm an address or a des tina tion .
W hen you have selected a destination, t he
route guid ance can be sta rted directly.
- Check the address input again when se lecting
an add ress.
- Then select and co nfirm
Start route guidance .
Additional directory functions in the navigation
system can be found unde r¢
page 208.
{!) Tips
-Addresses that have been imported from
your cell phone into the MMI can also be used as a destination.
203

Navigat ion
-If a contact is grayed out in the directory,
this contact has neither a destination nor an
address assigned to them.
Point of interest search
Applies to: ve hicles w ith navigation system
.. Press the I NAV /MAPI bu tton repeatedly until
t he
E nte r d estination menu is displayed
¢page 201 , fig . 1 82 .
.. Select : left cont rol button > Point s of intere st.
-C hanging the search area : select and confirm
Sear ch ar ea > a search area from the list .
The following search categories are avai lab le:
Nearb y: points o f interes t can be sele cted from
different categories . The points o f interest are
list ed starting from the immediate vicinity of the
vehicle up to a radi us of approximate ly 124
miles (200 km).
Along the route: points of inte rest a long the
route can on ly be select ed during active rout e
gu idance. The points of interest are located d i­
rect ly along or in the immediate vicinity of the
calcul ated route. The points of interest can like­
wise be selected from various categor ies . For ex ­
ample, you can search for a hotel or park ing lot
at the destination .
Near destin ation /Near stopo ver : po ints of inter­
est near a destination or a stopover can only be
selected dur ing active route guidance . T he poi nts
of interest can likewise be se lected from va rious
ca tegor ies. For examp le, you ca n search fo r a ho ­
tel or parking lot a t the destination.
In new city : select a country/state or searc h in a
new c ity . Ente r the name of the des ired c ity .
P oints of i nte rest can be selected from var ious
ca tegor ies. Th is f unction allows you to searc h for
points of interes t in any ci ty regardless of the ac ­
tive route guidance or the vehicle position.
-Sea rch for a p oint of inter est name in these­
lec ted search are a:
en ter the name of the po int
of inte rest .
-Sear ching f or a poin t of inter est in a specifi c
ca tegory :
select Select cat egory . Select and
confirm a ca tegory such as
Restaurant s.
204
(D Tips
-Distances to points of interest are displayed
as a stra ight -line d istance from your current
location. The actual d istance from your cur­
rent location to the point of interest is up­
dated automatically. The list of found
points of interest is not resorted when this
happens.
-T here may be entr ies in the l ist that cannot
be displayed comp letely due to t heir length .
Select the cor respond ing ent ry from the
list. Select: r ight cont rol b utton> Show des­
ti na tion det ails. De tailed informa tion fo r
the se lected entry in the list is then dis­
played .
Online point of interest search (online
search)
App lies to: vehicles wit h a navigation system and Audi co n­
nect (Infota inment)
You can search for points of interest on the In ­
t e rnet .
Requirement: the requirements for Aud i connect
(Infotai nment) must be met
¢ page 190 .
.. Press the I NAV/MAPI button repeatedly until
the
Enter des tination me nu is displayed
~ page 201, fig. 182 .
.. Select: left control button > Online sear ch . Th e
searc h area last set is displayed in the inpu t
fie ld .
-C hanging the search area : select: right cont rol
bu tton >
S elect sear ch are a.
-Searching for onlin e destinations in thes e­
l ec ted search ar ea :
ente r a new c ity/state if
necessary. En ter the search term, such as hotel.
Press the contro l knob. Se lect and confirm an
online destination from the list.
-Sea rching for online de stinations in a specific
categor y:
se lect and confirm Sele ct category.
Select and confirm a category such as Re stau­
rants .
Find w hich search areas are avai lab le under
¢ page 204 , Point of interest search .
You can search for online destinations using the
vo ice recog nitio n
sys tem ¢ table on page 173. .,..

LL co ..... N
" N ..... 0 N > co
(D Tips
Always read the chapter¢ page 196, Audi
connect (Infotainment) general information .
Accessing destinations from myAudi
account
Applies to: veh icles with a navigation system and Audi con­
nect (Infotainment)
Import individual destinations from your myAudi
account into the
MMI.
Req uirement:
The requ iremen ts for Aud i connect (Infotain­
ment) must be met
¢ page 190 .
You must have a registered myAudi account at
www .audiusa .com/myaudi . You must have
ave ­
hicle assigned to your myAudi account and yo u
must have sto red one or mo re destinations .
... Press the I NAV/MAPI button repeatedly until
the
Ent er destination menu is displayed
¢ page 201, fig . 182 .
... Select: left cont rol button > myAudi contacts .
... If necessary, enter your myAudi user data o r
yo ur myAud i PIN¢
page 190 . The contacts
stored in myAudi are d isp layed.
- Se lect and confir m a conta ct.
- Se lect and confirm a priva te or b usiness desti-
nation .
- Select and co nfirm
Start route guidance .
(D Tips
-You only need to enter the myAud i user data
one time.
- You can receive your myA udi PIN if you have
set up a myAudi account.
- Fo r additional informat ion, visit
www.audiusa.com .
Entering a destination using geo
coordinates
App lies to: vehicles with navigation system
... Press the I N AV/MAPI but ton repeated ly un til
t h e
Enter de stination menu is dis played
¢page 201 , fig . 182.
Na viga tion
... Sele ct: left control button > Geographi cal coor­
dinates .
-Sele ct Latitude /Longitude .
-Press the cont ro l knob to set the individ ual va l-
ue s.
- Tur n the control knob to the left/ right to
change the selected va lue.
- Select and confirm
Start route guidance .
Adding a stopover
Applies to: vehicles with navigation system
You can enter an additional destination when
route guidance is active .
Fig. 184 Example: act ive route gu ida nce w it h stopover
Requireme nt: route guidance must already be ac ­
t ive.
... Press the ! NAV/MAP I button repeatedly unti l
the
Enter destination menu is displayed
¢ page 201 , fig.182 .
Entering a destination as a stopove r
-Enter a destination in the input line
¢ page 201 .
-Select an d confirm a destinat ion from the re -
sults list .
- Select and confirm
Add as stopover.
Deleting a stopover
- Push the contro l knob up. Fre e tex t sea rc h and
ac tive route g uidance are disp laye d.
Or : turn
t he co ntro l knob to t he left un til the act ive
route guid ance is shown.
- Sele ct and confirm
Delete stopover @
¢ fig. 184 .
-The stopove r is deleted .
205

u. 00 .-< N l'­ N .-< 0 N > 00
~ Press the I NAV/MAPI button repeated ly until
the
Enter de sti na tion menu is displayed
¢page 201, fig. 182 .
~ Select : right contro l button > Per son al rout e
a ss is tance .
When the function is switched on~, the MMI re ­
cords the frequently-driven routes regardless of
whether a destination was entered and reached
or not .
As long as route guidance is not active, your per ­
sonal routes are listed in the
Enter destination
menu under the home address and indicated with
the
symbol ~@ ¢ fig. 185 . When persona l
route assistance is sw itched on, th is symbol is
d isplayed in the Navigation menu a nd in the Info­
tainment system d isp lay stat us line at the same
time.
The distance to the destination and the calculat ­
ed arr ival t ime are also displayed for you r person­
a l routes. W ithout sta rt ing route gu idance, you r
MMI mo nitors the t raff ic condi tions fo r you r pe r­
sona l routes a nd s hows possib le t raff ic incidents
for the possible routes to be driven in the Info­
tainment system
disp lay @ ¢ fig. 185 .
A message will be d isp layed if the re is a large
traffic inc iden t (more than 12 m inute de lay) re ­
gardless of which menu is se lected
¢ fig. 186.
Select and confirm one of the following options :
-Start route guidance : the MMI starts the route
guida nce for the persona l route displayed and
searches for a fas ter route i f available.
- Ignor e this rout e and this m essage: the d is ­
played destination with a ll app licab le personal
routes is no longer factored into the current
trip. No more messages are shown for the dis­
played destination. The displayed destination
with all applicable personal routes w ill be fac­
tored into the trip again only after stopp ing the
vehicle and switching the ignition on aga in .
- Igno re all mes sages : all persona l routes are no
longer factored into the current trip . No more
messages are d isplayed . Messages for personal
r outes when there is increased traffic will ap­
pear aga in afte r the vehicle is stopped and t he
i gnition is sw itched on aga in.
Na vigation
As soon as you switch off personal route assis­
tance, the symbol in the status line turns off and
your trips are no longer recorded. Trips that were
already stored remain stored.
Deleting per sonal routes :
-Select the desired pe rsonal route in the Enter
de stination
menu @¢ fig. 185.
-Select: r ight control button > Delete d estina ­
tion .
D elet ing all per sonal rout es:
-Select: !MENU I button> Settings > left control
button >
MMI set tings > Factory setting s.
-Select: Navigation and online memory > Re­
store fa ctory
sett ing s¢ page 244.
(D Tips
- Persona l routes are learned based on the ve ­
hicle position. The ro ute is p rioritized ac ­
cording to how freq uent ly you drive to a
destination.
- A maximum of three personal ro utes are
displayed in the
Enter dest ination menu.
Based o n the current vehicle position, the
traff ic situat ion for the route that is most
likely to be drive n out of the three routes
w ill always be monitored .
- Please note that personal routes that have
already been stored will rema in stored after
the ignition is sw itched off and they must
be deleted ma nually.
Home address
App lies to : vehicles wit h navigat ion syste m
~ Press the INAV/MAPI button repeatedly unti l
the
Enter de stination menu is disp layed
¢ page 201, fig.182 .
Storing a home address
-Select and confirm Home address @
¢ page 201, fig. 182 . After opening the home
add ress fo r th e fi rst time, you will be as ked to
create a home add ress.
- Select and confirm
Creat e now .
-Enter a dest ination or select a destination from
the l ist .
Or : .,.
207

Navigation
-Select: a destination> right control button>
Store as home address.
Editing the home address
-Select the Home address@¢ page 201,
fig. 182.
-Se lect: right contro l button > Edit home ad ­
dress .
-Select and confirm a new desti nat io n as the
home address.
The selected destination is stored as the new home address .
Favorites
Applies to: veh icles with navigation system
.,. Press the I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
t::> page201 , fig .182 .
-Storing a destinat ion as a favorite: search for
the desired destination us ing the input field.
Or: select and confirm a destination from the
list . Se lect: right control button >
Store as fa­
vorite .
-Renaming a favorite : select the left control
button >
Favorites > a favorite from the list >
right control button >
Rename favorite .
-Move favorite: select a favorite from the list >
right control button>
Move favorite . Select
and confirm the location of the selected favor­
ite .
-Deleting a favorite : select a favorite from the
list>
r ight control button > Delete favorite >
Delete this favorite or Delete all favorites.
Directory contacts
Applies to: vehicles with navigation system
Two addresses (private/business) con be as­
signed as destinations for each contact in the di­ rectory .
.. Press the I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
¢page 201, fig . 182.
208
Storing a destination as a contact in the
directory
Requirement: a cell phone must be connected to
the MMI
¢page 177 .
-Select: o destination > right contro l button >
Add destination to contact.
-Select and confirm Add business destination or
Add private destination.
-Enter a name. Or: select and confirm a directo­
ry contact from the list .
- Select and confirm
Save business card.
Alternative routes
Applies to: vehicles with navigat ion system
Fig. 187 Diagram: d isp lay of a lternat ive routes in t he ove r­
view map
Requirement: a destination must be entered and
the route guidance must be started .
.. Press the I NAV/MAPI button repeatedly until
the
Enter destination menu is displayed
¢page 201, fig. 182 .
.. Select: right control button> Nav igation set-
tings
> Show alternative routes.
Three routes will be displayed in the overview
map after you enter a
dest ination ¢ fig. 187 .
.. Select and confirm the des ired route that you
would like to use for route guidance.
Up to three route suggestions and their proper­
ties are d isplayed on the overview map when the
function is switched
on~¢ fig. 187.
If available, the fo llow ing information will ap­
pear on the route suggestions :
-Route type (fast(!), fast alternative @, eco­
nomic route @)
- Distance to the destination and the calculated
arrival time
...

u. 00 .-< N l'­ N .-< 0 N > 00
- Traffic congestion along the ro ute including
time delays
The route that was calcu lated acco rding to the
ro ute criter ia you sele cted is shown on the over ­
view map . The special propert ies of the route are
a lso
displayed @~ fig. 187 and given as a spo­
k en message.
Using the contro l knob , you can se lect t he possi ­
b le routing for the alternative routes and show
them on map Select and confirm the desired ro ute that you would like to use for route guid­
ance.
Additional settings
Navigation settings
Applies to: vehicles with navigation system
.,. Press the I NAV /MAPI but ton repe ated ly un til
the
Enter de stination menu is displayed
¢ page 201, fig.182 .
.,. Select : rig ht contro l button > Navigation set-
tings .
Depending on the se lected function, the follow ·
ing settings can be se lected :
Show alternative routes
Up to three suggested ro utes are shown on the
map whe n this funct ion is switched
on~
~ page 208, Alternative routes.
Low fuel warning
A message is disp layed if the fuel gauge goes be ­
l ow the reserve mar king when this funct ion is
sw itched
on~-Co nfirm ing th is m essage displays
a lis t of gas stations in the area. When a gas sta ­
t ion is selec ted, route g uidance from the c urren t
ve hicl e position is calc ulated .
Trailer mode*
Tra iler mode is sw itched off at the factory .
When the function is switched
on~. the maxi­
mum permitted speed for vehicles with trailers is
i ncorporated into the route guidance and the cal­
culated arr ival time is adjusted acco rding ly . T rail­
e r mode is d isp layed using symbols
-Pe' in the side
menu on the m ap .
Na vigation
Personal route as sistance*
Persona l rou te ass istance is swi tched off at the
f actory.
You r trips a re recorded and dest inations a re s ug­
gested by the M MI w hen th is fu nction is sw itched
o n ~¢ page 206.
Notification when nearby*
The not ification when nearby is switched off at
the factory .
The MM I not ifies you when you are approaching
selected points of interest when t his function is
switched
on~ -You can also have a Notification
tone .
Presentation mode
The Presentation mode he lps you to effectively
plan a tr ip and fo llow the planned route without
moving the vehicle . You can use
Select starting
point
when you wou ld like to calculate a ro ute
sta rt ing from a location othe r than the ve hicle
pos it ion, for examp le. Sta rt
Presentation mode
to s imula te rou te g uidance .
Route criteria
Applies to: vehicles with navigation system
Jl
Fig. 18 8 Possible ro ute c rit e ri a
.,. Press the INAV/MAPI button repeatedly unti l
the
Enter destination men u is displayed
¢page 201, fig . 182 .
.,. Select: r ight cont rol b utton> Route criteria .
209