AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual

AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual S4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1287/w960_1287-0.png AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual
Trending: ECU, engine, brake

Page 1 of 27

AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual 30-1
 
     
Clutch mechanism, servicing 
     
Note:  
     
For vehicles with coded radio, obtain and note 
the radio code. 
     Disconnect battery Ground strap with the 
ignition switched off.

Page 2 of 27

AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual 30-2
 
  
Pedal cluster, assembly overview
 
 Repair Manual, Brake System, Repair Group 46
 
  1 - 
Mounting bracket 
Detach steering column from steering box 
before removing 
2 - 
Pivot pin 
For clu

Page 3 of 27

AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual 30-3
 
  
6 - 
Clutch pedal 
Removing and installing   Page 30
-5
7 - 
Pin 
Clip onto clutch pedal
8 - 
Locking clip 
9 - 
Master cylinder Removing and installing   Page 30
-17
Do not operate clutch p

Page 4 of 27

AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual 30-4
 
  
 Parts catalog    12 - 
Over-center spring 
AllocationRemove and install with clutch pedal   
Page 30
-5 
13 - 
Hex socket head bolt, 5 Nm 
Secures clutch and brake pedal pivot pin
14 - 
Sea

Page 5 of 27

AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual 30-5
      
Clutch pedal and over-center spring, 
removing and installing
 
     
Removing  
     
-  Remove drivers side storage compartment:
     
       Repair Manual, Body Interior, Repair Group

Page 6 of 27

AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual 30-6
 
    
-  Unscrew bolt (arrow). 
-  Press clutch and brake pedal pivot pin out to the right, until the clutch 
pedal can be removed. 
-  If necessary press brake pedal securing clip off pivot pin

Page 7 of 27

AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual 30-7
      
Installing  
      Installation is carried out in the reverse order, 
when doing this note the following:  
    
-  Align clutch pedal/brake pedal pivot pin so that it protrudes out of 
mo

Page 8 of 27

AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual 30-8
 
    
Note:  
To ensure proper securing, the switch may only be installed once.  -  Check adjustment of switch -1- via clutch pedal as follows:
 
Switch -1- must sit completely against clutch pe

Page 9 of 27

AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual 30-9
 
  
Clutch Pedal Position (CPP) switch -F 194-, 
removing and installing
 
Note  
The clutch pedal position (CPP) switch -F194- 
ensures that the engine can only be started with the 
clutch peda

Page 10 of 27

AUDI S4 1998 B5 / 1.G 01E Transmission Clutch Mechanism Service Workshop Manual 30-10
 
  
6 - 
Clip 
7 - 
Harness connector bracket 
8 - 
Clutch Pedal Position (CPP) Switch -F 
194- 
Adjusting  Page 30
-11
9 - 
Clip 
10 - 
Screw and washer assembly 
8 Nm
11 - 
Securing plate 
Pa
Page:   1-10 11-20 21-30 next >
Trending: ECU, brake, engine