ECU AUDI TT COUPE 2017 Owner's Guide

Child safety
-If a seat heater has been retrof itted or oth­
erwise added to the front passenger seat,
never install any child restraint system on
this seat .
- Make sure that there are no wet objects
(such as a wet towe l) and no water or other
liquids on the front passenger seat cushion .
- Never place objects on the seat (such as a
laptop, CD player, electronic games device,
power inverter or seat heater for child
seats) . These may influence the e lectr ica l
capacitan ce measured by the capacitive pas­
senger detection system and can also fly
around in an acc ident and ca use serio us pe r­
sonal injury .
- Make s ure tha t the
PASSENGER AIR BAG
OFF ~;
light comes on and stays on a ll the
time whenever the ignition is switched on.
- If the PASSENGER AIR BAG OFF 1i; light
does not come on and stay on, immediate ly
insta ll the forward-facing child seat at a
seating position on the rear seat and have
the a irbag system inspected by your author­
ized Audi dealer.
- Take the ch ild restraint off the front passen­
ger seat and install it properly at one of the
rear seat positions if the
PASSEN GER AIR
BAG OFF ~;
light does not stay on whenever
the ignition is switched on .
Booster seats and safety belts
Properly used booster sea ts can help protect
children weighing between about 40 lbs and
80 lbs (18 kg and 36 kg) who are less than 4 ft 9
in (57 in/1 .45 m) tall.
F ig . 17 4 Rea r seat: chi ld p roper ly restra ined in a booster
seat
230
The vehicle's safety belts alone wi ll not fit most
children until they are at least 4
ft 9 in (57 in/
1.45 m) tall and weigh about 80 lbs (36 kg) .
Booster seats raise these children up so that the
safety be lt will pass properly over the stronger
parts of their bodies and the safety belt can help
protect them in a crash.
.. Do not use the convertib le locking retractor
when us ing the ve hicle's safety belt to restra in
a child on a booster seat .
.., The shoulder belt must lie as close to the cen­
ter of the child's collar bon e as possib le and
must l ie flat and snug on the uppe r body.
It
must never lie across the throat or neck. The
lap belt must lie ac ross the pelvis and never
across t he stomach or abdomen . Make sure the
belt lies flat and snug. Pu ll on the belt to tight­
en if necessary.
.. Secure unused safety belts on the rear seat
¢page 227.
Children up to at least 8 years o ld (over 40 lbs or
18 kg) are best protected in child safety seats de ­
s igned for their age and weight. Experts say that
the skeletal structure, part icu larly the pelvis, of
these children is not fully developed, and they must not use the vehicle safety belts without a
su itab le child restra int.
It is usually best to put these children in appro­
pr iate booster seats . Be sure the booster seat
meets a ll applicab le safety standards .
Booster seats raise the seating position of the
c hi ld and reposition both the lap and shoulder
parts of the safety belt so that they pass across
the chi ld's body in the right places . The rou ting of
the be lt over the ch ild's body is very important
fo r the child's protection, whet he r or not a boos ­
ter seat is used. C hildren age 12 and under m ust
a lways ride in the rear seat.
Never use the lap belt port ion of the vehicle's
safety belt alone to restra in any child, regard less
of how b ig the child is. A lways remember that
c hi ldre n do not have the pronounced pe lvic struc ­
ture requ ired for the proper function of lap belt
portion of the vehicle 's three point lap and
shou lder belts. The chi ld's safety absolutely re­
quires that a lap belt port ion of the safety belt be ...,

Child safet y
use the available th ree -point lap and shoulder
safety belts .
A WARNING
-The rear seat area is too small to safe ly
transport passengers taller than 4 ft 9 in
(57 in/1.45 m).
-
- Persons taller than 4 ft 9 in (57 in/1.45 m) as well as children in booster seats who are
too close to the rear window and roof can
suffer severe head and neck injur ies when
the rear lid is closed o r in a crash.
- The m inimum clearance betwee n the pas­
sengers' heads and the rear window must
never - under any circumstances - be less
than 1 in ( 2.5 cm) whe n the passenge rs s its
f ully up right .
- Always make sure tha t the rear seat passen­
gers canno t be str uck when the rear lid is
cl osed.
Booster seats on the front seat
Ch ild ren aged about 7 years and older and weigh ­
ing more than 55 lbs (25 kg) who are between
4 ft 3 in (5 1 in/1.30 m) and 4 ft 9 in (57 in/
1.45 m) tall may in exceptional circumstances
ride on the front passenger's seat. Children less
than 4 ft 9 in (57 in/1.45 m) tall must s it on a
certified booster seat and properly wear the vehi ­
cle 's three-poin t lap and shoulder safety be lt .
Always securely latch the passenger seat at t he
very rear of its fore and aft adjustment range.
The bac krest must be adjusted to an upr ight po­
sition .
A WARNING
If you must insta ll a booster seat ch ild re­
st raint o n the fro nt passenger sea t:
- Make s ure the booster seat has been de­
s igned and certified by its manufa ctu rer for
use on a front seat wit h a pas senge r fr ont
and side air bag.
- Alw ays follow the m anuf act urer's instruc­
ti on s prov ided with the boos ter sea t.
232
- Always move the passenger seat to the very
rear o f its fore and aft adjustment range, as
far away from the airbag as possib le.
- Always make sure that the passenger seat is
secure ly latched in place before instal ling
the booster seat. The backrest must be ad­
justed to an upr ight position .
- If the passenger seat cannot be secu rely
latched in the very rear of its fore and aft
ad justment range , then t he passenger front
airbag must be turned off with the ON / OFF
s w itch.
Securing child seats
Securing a child safety seat using a safety
belt
Safety belts for the rear seats and the front pas­
senger can be locked with the convertible locking
retractor to properly secure child safety seats.
The safety belts emergency lock ing retractors for
the rear seats safety be lts and for the front pas­
senger's seat safety be lt have a convert ible lock­
i ng retractor for child restra ints. The safety belt
must be locked so t hat be lt webb ing ca nnot un­
r eel. The retractor ca n be act ivated to lock the
safe ty belt and prevent the safety belt webbing
from loosening up dur ing no rm al driv ing. A chi ld
s a fe ty se at can on ly be prope rly insta lled when
the safety be lt is locked so that the ch ild and
c hi ld safety seat will stay in place .
Always remembe r: E ven thoug h your veh icle is
equipped wi th an Advan ced Airba g system, all
c hi ldren, especially those 12 yea rs and younger,
shou ld always ride in the back seat proper ly re ­
strained for their age and size .
A WARNING
Improperly installed child safety seats in­
crease the r isk of serious personal injury and
death in a co llision .
-
-Always make sure that the safety be lt re­
tractor is locked when installing a c hild
safety seat. An unlocked safety be lt retrac­
to r cannot hold the ch ild safety seat in place
during normal d riving or in a c rash.

co
co
.... N
" N .... 0
0
Vl c:o
-Always buckle the child safety seat firmly in
place even if a child is not sitting in it. A
loose child safety seat can fly around during
a sudden stop or in a collision.
- Always make sure that the rear seat back­
rest is securely latched whenever the rear
safety belt is being used to secure a child re­
straint .
- If the backrest is not securely latched, the
child and the child restraint will be thrown
forward together w ith the backrest and will
st rike parts of the vehicle interior. The ch ild
can be se riously inj ured or killed.
- Never install rear-facing chi ld safety seats
o r infant carriers on the front passenger
seat. A child will be serious ly inju red and
can be killed when the passenger airbag in­
flates .
- The inflating a irbag will hit the child safety
seat or infant carrier with great force and
will smash the chi ld safety seat and chi ld
against the backrest, center armrest, door
or roof.
- Always install rear-facing child s;:ifety seats
or infant carriers on the rear seat.
- Forward-facing ch ild safety seats or infant
carriers installed on the front passenger's
seat may interfere with the deployment of
the a irbag and cause serious injury to the
child .
- It is safer to install a forward-fac ing ch ild
safety seat on the rear seat.
-Always read and heed all WARNINGS when­ ever using a child restrained in a veh icle is
being used
¢ page 221. Spec ial precaut ions
apply when installing a child safety seat on
the front passenger seat
¢ page 198, Child
restraints on the front seat -some impor­
tant things to know .
A WARNING
Always take spec ial precaut ions if you must
install a forward or rearward-fac ing ch ild re­
straint on the front passenger 's seat in excep ­
tional situations:
- Whenever a forward or rea rward-facing
child restraint is installed on the front pas-
-
Ch ild safety
senger seat, the PASSENGER AIR BAG OFF
,r; light must come on and stay on whenev­
er the ign ition is switched on.
- If the
PASS ENGER AIR BAG OF F ,r; light
does not come on and stay on, perform the
checks described
¢ page 209, Monitoring
the Advanced Airbag System .
-Take the child restra int off the front passen­
ger seat and install it properly at one of the
rear seat positions if the
PA SSENGER AIR
BAG OFF
,r; light does not stay on whenever
the ignition is switched on.
- Improper installat ion of child restraints can
reduce the ir effectiveness or even prevent
them from providing any protect ion.
- An improperly installed child restra int can
interfere with the airbag as it deploys and
serio usly injure or even kil l the chi ld.
- Always carefully follow the manufacturer's
instr uctions provided wi th the child safety
seat o r ca rr ie r.
- After checking to make su re that the ch ild
rest raint is properly ins talled , make cer tain
that the child restrain t is correctly recog­
n ized by the capacitive passenger detection
system in the front passenger seat and that
the
PASSENGER AIR BAG OFF ,r; li ght sig­
na ls the correct front passenger fronta l air­
bag status.
A WARNING
Forward-facing child restra ints:
- Always make sure the forward-facing seat
has been des igned and certified by its man­
ufacturer for use on a front seat with a pas­
senger front and side airbag .
- Never put the forward-facing child restraint
up, against or very near the instrument pan­
el.
- Always move the passenger seat into its
rearmost posit ion in the seat's fore and aft
ad justment range, as far away from the a ir­
bag as possible before installing the fo r­
ward-facing ch ild restraint. The backrest
m ust be adjus ted to an upr igh t position .
233

Child safety
-Make sure that the PASSENGER AIR BAG
OFF 11;; light comes on and stays on all the
time whenever the ignition is switched on.
_&. WARNING
Rearward-facing child restraints:
-A child in a rearward-facing child safety seat installed on the front passenger seat will be
seriously injured and can be killed if the
front airbag inflates - even with an Ad­
vanced Airbag System.
- The inflating airbag will hit the child safety
seat or infant carrier with great force and
will smash the child safety seat and child
against the backrest, center armrest, door
or roof.
-Always be especially careful if you must in­
stall a rearward facing child safety seat on
the front passenger seat in exceptional cir­
cumstances.
- Make sure that the
PASSENGER AIR BAG
OFF 11;; light comes on and stays on all the
time whenever the ignition is switched on.
-If the PASSENGER AIR BAG OFF~; light
does not come on and stay on, immediately
install the rear-facing child safety seat in a
rear seating position and have the airbag
system inspected by your Audi dealer.
Activating the convertible locking retractor
Use the convertible locking retractor to secure a
child restraint.
Always heed the child safety seat manufacturer's
instructions when installing a child restraint in
your vehicle. To activate the convertible locking
retractor:
.,. Place the child restraint on a seat, preferably
on the rear seat.
.,. Slowly pull the belt
all the way out.
.,. Route it around or through the child restraint
belt path
¢ _A .
.,. Push the child safety seat down with your full
weight to get the safety belt really tight .
.,. Insert the belt tongue into the buckle for that
seating position .
234
.,. Guide the safety belt back into the retractor un­
til the belt lies flat and snug on the child safety
seat.
.,. You should hear a "clicking" noise as the belt
winds back into the inertia reel. Test the con­
vertible locking retractor by pulling on the belt .
You should no longer be able to pull the belt
out of the retractor. The convertible locking re­
tractor is now activated.
.,. Make sure that the red release button is facing
away from the child restraint so that it can be
unbuckled quickly.
.,. Pull on the belt to make sure the safety belt is
properly tight and fastened so that the seat
cannot move forward and sideways more than
1 in (2.5 cm).
_&. WARNING
Using the wrong child restraint or an improp­
erly installed child restraint can cause serious
personal injury or death in a crash.
- Always make sure that the safety belt re­
tractor is locked when installing a child
safety seat. An unlocked safety belt retrac­
tor cannot hold the child safety seat in place
during normal driving or in a crash.
-Always buckle the child safety seat firmly in
place even if a child is not sitting in it. A
loose child safety seat can fly around during
a sudden stop or in a crash.
- Always make sure the seat backrest to which
the child restraint is installed is in an up­
right position and securely latched into
place and cannot fold forward. Otherwise,
the seatback with the child safety seat at­
tached to it could fly forward in the event of
an accident or other emergency situation .
- Always read and heed all WARNINGS when­
ever using a child restrained in a vehicle is
being used
¢ page 221. Special precautions
apply when installing a child safety seat on
the front passenger seat
¢ page 198, Child
restraints on the front seat -some impor­
tant things to know.

Child safety
-Always follow the instructions provided by
the manufacturer of the child restra int you
intend to install in your vehicle.
- Never install a child restraint without a
properly attached top tether strap if the
child restraint manufacturer's instruct ions
requ ire the top tether strap to be used.
- Improper use of child restraint LATCH lower
anchorage points can lead to injury in a colli­
sion. The LATCH lower anchorage points a re
designed to withstand only those loads im­
posed by correct ly fitted child rest raints.
- Never mount two ch ild restraint systems on
one LATCH lower a nchorage point.
- Never secure or attach any luggage or other
item to the LATCH lower anchorages .
(D Tips
-In Canada, the terms "top tether" with
"lower u niversal anchorages" (or "lower uni­
ve rsal anchorage bars") are used to describe
the system.
- In other countries, the term "ISOFIX" is
u sed to describe the lower anchorages.
Location
F ig. 175 Schemat ic overv iew: LA TCH anc horage point loca­
tions
The illustration shows the seating locat io n s in
your veh icle which are equipped with the lower
universal anchorages system.
236
Description
The lower anchorage positions are marked for
quick locating .
Fig. 176 Lower anchorages, covers marked
F ig . 177 Rear seats: lowe r anchorage bracket locations
L o wer anch orag es
The circular markings on t he rear seat help you to
identify the location of lower anc horages for the
two outboard seating positions ¢
fig. 176 . The
LATCH lower universal anchorage attachment
points are between the rear seatback and rear
seat cushion .
Remove the covers ¢
fig. 176 to access the lower
anchorage attachment points.
The lower ancho rage attac hment po ints are v is i­
ble ¢
fig. 177.
Lowe r anchorages secure the child restra int in
the seat wi thou t usi ng the vehicle's safety belts.
Anchorages p rov ide a secure and easy-to- use at ­
tachment and minimize the possibility o f improp­
er child restraint installation.
All child restra ints man ufact ured after Septem­
ber 1, 2002, must have lower anchorage attach -
ments for the
LATCH system. ..,.

co
co
.... N
" N .... 0
0
Vl c:o
Please remember that the lower anchorage
points are only intended for installation and at­
tachment of child restraints specifically cert ified
for use with
LATCH lower anchorages. Child re­
straints that are not equipped with the lower an­
chorage attachments can still be installed in
compliance w ith the child restra int manufactur­
er 's instructions on using vehicle safety belts .
.8, WARNING
Improper use of LATCH lower anchorages can
cause serious personal injury in an accident.
- Always caref ully follow the child restra ints
man ufactu rer's inst ructions for proper in­
sta llation of the child restr aint and proper
u se of the lower anchorages or safety be lts
in your vehicle.
- Never secure or attach any luggage or other
items to the
LATCH lower anchorages.
- Always read and heed t he important infor­
mation about child restraints in this chapter
and WARNINGS
¢ page 221, Child safety .
Installing a child restraint with LATCH
lower anchorages
Whenever you install a child restraint always fol­
low the child restraint manufacturer's instruc­
tions.
F ig . 178 Lower anchorages: proper mounting
Mounting
.,. Make sure the seatback of the rear seat bench
is in the upr ight position and sec urely latched
i n place.
.,. Remove the covers to access the lowe r anchor­
age brackets.
Ch ild safety
.. Attach both hook-on connectors with the spring
catch release on the child safety seat onto the
LATCH lower anchorage so that the connectors
lock into place ¢
fig. 178 .
.. Pull on the connector attachments to make
sure they are properly attached to the LATCH
lower anchorage .
.. Pull straps tight following the ch ild rest raint
manufacturer 's instructions .
Releas ing
.. Loosen the tension on the straps fo llow ing the
child restra int manufacturer's instructions.
.. Depress the spr ing catches to release the an­
chorage hooks from the lower anchorages.
Remember: Use tether straps to help keep the
child restraint firmly in place .
.8, WARNING
--Improper use of the LATCH system can in­
crease the risk of se rious persona l injury and
death in an accident .
-
-These anchors were developed only for chi ld
safety sea ts using the "LATCH" system.
- Never attach othe r ch ild safety seats, be lts
or other objects to these anchors.
- Always make sure that you hear a click whe n
latching the seat in place.
If you do not hear
a cl ic k the seat is not se cure and co uld fly
forward and hi t the inter ior of the vehicle,
or be ejected from the vehicle .
.8, WARNING ~ -
I mp roper insta llation of child restra ints w ill
increase the risk of injury in an accident.
- Always fo llow the ch ild restraint system
manufacturer's instructions fo r proper in ­
stallation of the chi ld restraint system and
proper use of tether straps as well as the
lowe r anchorages or safety belts in yo ur ve­
h icle .
-Always read and heed the important infor­
mat ion and WARNINGS about ch ild safety
and the installation of child restraint sys­
tems¢
page 221, Child safety .
237

Child safety
Tether anchors and tether straps
Fig. 179 Tether anchors: attachm ent hook locatio ns be­
hind the rear seatbacks
The tether anchors fo r the rear seating positions
are located on the backside of the rear seat­
backs .
A tether is a stra ight or V-shaped strap tha t at­
taches the top part of a child restra int to speci al
anchorage points in the vehicle.
The purpose of the tether is to red uce the for­
ward movement of the child restraint in a crash,
in order to help red uce the risk of head injury
that could be caused by strik ing the vehicle inte­
rior.
Forward fac ing child restraints manufactured af ­
ter September 1, 1999, are required by U.S. fed­
eral regulations to comply with new child head
movement performance requirements. These
new perfo rmance requirements make a tethe r
necessary on most new child safety seats.
A WARNING
Improper installation of ch ild restraints will
increase the r isk of injury and death in a
crash.
- Always follow the instructions provided by
the manufacturer of the child restra int you
intend to install in your Audi .
- Improper use of child restra int anchors (in­
clud ing tether anchors) can lead to inj ury in
a collision . The ancho rs are designed to
withs tand only those loads imposed by cor­
rectly fitted child restra ints.
- Never mount two chi ld restraint systems on
one LATCH lower a nchor po int.
238
- Never attach two child restraint systems to
one tether strap or tether anchorage.
- Never attach a tether strap to a tie-down
hook in the luggage compartment .
- Never use child restraint tether anchorages
to secure safety be lts or other kinds of occu­
pant restraints.
- Never secure or attach any luggage or othe r
items to the LATCH lower anchorages or to
the tether anchors.
- If you must install a rearward facing child
safety seat on the front passenger seat be­
cause of exceptional circumstances and the
PASSEN GER AIR BAG OFF fj,;; light does not
come on and stay on, immediately install
the rea r-facing child safety seat in a rear
seating position and have the ai rbag system
inspected by yo ur Audi dea ler.
Installing the upper tether strap on the
anchorage
F ig. 180 Tether strap: p rope r rout ing and mount ing
F ig. 1 8 1 Tethe r strap: p roper rout ing and mounti ng
Installing the tether strap
.,. Re lease or deploy the tether strap on the ch ild
restraint accord ing to the ch ild restrain t manu­
facture r's instructions.

CD
CD
.... N
" N .... 0
0
Ill co
-Engine exhaust, some of its constituents,
and certain vehicle components contain or
emit chemicals known to the State of Cali­
fornia to cause cancer and birth defects and
reproductive harm. In addition, certain flu­
ids contained in vehicles and certain prod­
ucts of component wear contain or emit
chemicals known to the State of California
to cause cancer and birth defects or other
reproductive harm.
- Battery posts , terminals and related acces­
sories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harms.
Wash hands after handling.
(D Note
When filling fluids, be sure not to mix the flu­
ids up. Otherwise severe ma lfunctions and en­
gine damage will occur.
@ For the sake of the environment
You shou ld regularly check the ground under
your vehicle in order to detect leaks quickly. If
there are visible spots from oil or other fluids, bring your vehicle to an authorized Audi deal­
er or author ized Audi Service Facility to be
checked.
Opening/closing the hood
The hood is released from inside the vehicle.
Fig. 187 Sect ion from the driver 's side footwell: release
lever
Checking and Filling
Fig. 188 Unlocked hood : lever
Make sure the wiper arms are not raised up from
the windshield. Otherwise the paint could be
damaged .
Opening the engine compartment lid
"With the driver's doo r open, pull the lever be-
low the instrument panel in the direction of the
arrow
q fig. 187.
" Raise the hood slightly ¢.&_ .
" Press the lever
qfig. 188 in the direct ion of the
arrow. This releases the hooks .
"O pen the hood .
Closing the engine compartment lid
" Push the hood down until you override the
force of the struts.
" Let the hood fall lightly into the latch .
Do not
press it in. ¢.&_ .
A WARNING ,..___
-Never open the hood when there is steam or
coo lant escaping from the engine compart ­
ment, because there is a risk that you could
be burned. Wait until no steam or coolant is
escaping.
- For safety reasons, the hood must always be
closed securely while driving. Because of
this, always check the hood after closing it
to make sure it is latched correctly. The
hood is latched if the front corners cannot
be lifted.
- If you notice that the hood is not latched
while you are driving, stop immediately and
close it, because this increases the risk of an
accident .
245

CD co .... N
" N .... 0
0
Ill co
Emergency assistance
General information
"' Park the vehicle as far as poss ible from moving
traffic in the event of a breakdown. In the event
of a flat tire, park the vehicle on a leve l surface .
It you are on a steep h ill, be especially careful.
"' Set the parking brake.
"' Place the selector lever in the P position .
"' Switch the emergency flashers on .
"' Have the passengers exit the veh icle . They
shou ld move to a safe place, for example be­
hind a guard rail.
_& WARNING
Follow the steps given above. This is for your
protection and the for the safety of other d riv­
ers .
Equipment
Vehicle tool kit/tire mobility kit/
compressor
F ig . 200 Luggage co mpa rtment : ca rgo floo r closed
The vehicle tool kit, tire mobility kit and com­
p ressor are sto red in the luggage compartment
u nder the ca rgo floor cover.
"' Push on the plast ic handle and lift up the cargo
floor .
"' Open the cargo floor .
Completely ret ract the vehicle jack arm before
storing the vehicle jack* .
_& WARNING
Improper use of the vehicle jac k can ca use se­
r ious personal inju ries .
Em ergen cy a ssis tanc e
-Never use the screw driver hex head to
tighten wheel bolts, since the bolts cannot
attain the necessary tightening torque if you
use the hex head, potentially causing an ac­
cident .
- The factory-supplied jack is intended only
for your veh icle model. Under no circum ­
stances shou ld it be used to lift heavy
veh icles or othe r loads; you risk injuring
yourself.
- Never start the engine when the vehicle is
raised, which co uld cause an a ccident.
- Support the vehicle securely with a ppropri­
ate stands if wo rk is to be pe rformed under­
nea th the vehicle; otherwise, there is a po­
tential risk fo r injury.
- Never use the ja ck supp lied with your Aud i
on ano ther veh icle, p articularly on a heavier
one. The jack is only s uitab le for use on the
veh icle it came with.
(D Tips
The vehicle ja ck* in your vehicle is ma inte­
nan ce-free.
Tire mobility kit
Preparation
App lies to : vehicles wi th tire mo bility kit
"' Read and follow the important safety precau-
tions <=>
page 281 , General information .
"'Set the park ing brake .
"' Select the P selector lever posit ion .
"' Check if a repair wi th the tire mob ility kit is pos­
sible
<=> page 282.
281

Emergency assistance
_& WARNING
You or your passengers could be injured while
changing a wheel if you do not follow these
safety precautions :
- If you have a flat tire, move a safe distance
off the road. Turn off the engine, turn the
emergency flashers on and use other warn­
ing devices to alert other motorists.
- Make sure that passengers wait in a safe
place away from the vehicle and well away
from the road and traffic.
- To help prevent the vehicle from moving
suddenly and possibly slipp ing off the jack,
always fully set the parking brake and block
the wheel diagona lly opposite the wheel be­
ing changed . When one front wheel is lifted
off the ground, placing the Automatic
Transmission in P (Park) will
not prevent the
vehicle from moving.
- Before you change a wheel, be sure the
ground is level and firm. If necessary, use a
sturdy board under the jack.
- Always store the vehicle tool kit, the jack
and the replaced tire in the luggage com­
partment
c:> page 185.
@ Tips
Obey all laws.
Removing the cover
Fig. 204 Whee l: wheel hub cover
284
Fig. 20S Wheel: wheel bolts with caps
Wheel hub covers*
.. Insert the hook (from the vehicle tool kit) into
the hole on the whee l hub cover
c:> fig . 204.
.. Remove the wheel hub cover.
Wheel bolts with caps*
.. Slide the plastic clip (from the vehicle tool kit)
onto the cap until it engages
c:> fig. 205.
.. Remove the cap with the plastic clip.
Loosening the wheel bolts
Fig. 206 Changing a tire: loosen the wheel bo lts
.. Slide the wheel wrench (from the vehicle tool
kit) all the way onto the wheel bolt .
.,. Turn the wheel bolt approximately one turn to
the left -arrow- . To reach the required torque,
hold the end of the wheel w rench. If the wheel
bolt will not loosen, press carefu lly on the
wheel wrenc h with your foot. Hold on to the ve­
hicle securely while during this and make sure
your stance is stable.
&_ WARNING
To reduce the risk of an accident, only loosen
the wheel bolts gently (one turn) before rais­
ing the vehicle with the vehicle jack* .