beam BMW 1M 2011 E82 Owner's Manual

9
Dashboard
At a glance
The description of features without spe-
cific page references can be found in the
Owner's Manual for Vehicle under the respec-
tive keyword. <
2 Exterior mirrors fo lding in and out
3 Adjusting exterior mirrors, automatic curb
monitor
6 Instrument cluster 10
9 Ignition lock 10
Buttons on the steering wheel
11 Horn, entire surface
12 Adjusting the steering wheel
14 Releasing the hood
1
Opening and closing windows
4 Parking lamps/low beams
Low-beam headlamps
Automatic
headlamp control
Adaptive Light Control
High-Beam Assistant
5 Turn signal indicators
High beams, headlamp flasher
Roadside parking lamps
Computer
Settings and information about the
vehicle
7 Windshield wipers
Rain sensor
8 Switching the ignition on/off and
starting/stopping the engine
Telephone:
Accepting and ending a call; dial-
ing selected phone number. Redi-
aling if no phone number is
selected
Volume
Voice commands
for telephone
Changing the radio station
Interrupting a traffic bulletin
Selecting a music track
Scrolling through the redial list
M Engine Dynamics Control 16
Next entertainment source
13 Cruise control
Online Edition for Part no. 01 40 2 609 935 - \251 08/11 BMW AG

10
At a glanceDashboard
Instrument cluster
The description of features without spe-
cific page references can be found in the
Owner's Manual for Vehicle under the respec-
tive keyword. <
1 Speedometer
2 Indicator lamps for turn signals
3 Indicator and warning lamps 11
4 Tachometer 17
5 Engine oil temperature 17
6 Display for
>Clock
> Outside temperature
> Indicator and warning lamps 7
Display for
>Computer
> Date of next scheduled service, and
remaining distance to be driven
> Odometer and trip odometer
> High-beam Assistant
> Initializing Flat Tire Monitor
> Resetting the Tire Pressure Monitor
> Checking oil level
> Settings and information
> There is a Check Control message
> SPORT M Engine Dynamics
Control 16
8 Fuel gauge 17
9 Resetting the trip odometer
Online Edition for Part no. 01 40 2 609 935 - \251 08/11 BMW AG

25
Things to remember when driving
Driving tips
Corrosion on brake rotors
When the vehicle is driv
en only occasionally,
during extended periods when the vehicle is not
used at all, and in operating conditions where
brake applications are le ss frequent, there is an
increased tendency for corrosion to form on
rotors, while contaminan ts accumulate on the
brake pads. This occurs because the minimum
pressure which must be exerted by the pads
during brake applications to clean the rotors is
not reached.
This can also lead to a permanent loss in ride
comfort and to squealing noises during braking.
A loss in comfort can also be caused by
extended braking with little pressure on the
pedal.
Should corrosion form on the brake rotors, the
brakes will tend to respond with a pulsating
effect that even extended application will fail to
cure.
For information on brake system technology,
refer to Compound brake on page 26.
Right-hand/left-hand traffic
When crossing the border into countries in
which one drives on the other side of the road
than in the country of registration, it is neces-
sary to take steps to avoid blinding oncoming
traffic with the headlamps.
Your BMW center stocks adhesive film. Follow
the accompanying instructions for applying the
film.
When the headlamps have been covered with
the adhesive film, rotate the light switch to
position 2, refer to the Owner's Manual for the
vehicle to switch on the low beams, even with
automatic headlamp control.
Online Edition for Part no. 01 40 2 609 935 - \251 08/11 BMW AG