tow bar BMW 3 SERIES 1991 E30 Workshop Manual

BMW 3 SERIES 1991 E30 Workshop Manual 3 SERIES 1991 E30 BMW BMW https://www.carmanualsonline.info/img/1/2759/w960_2759-0.png BMW 3 SERIES 1991 E30 Workshop Manual

Page 52 of 228

BMW 3 SERIES 1991 E30 Workshop Manual 15The remainder of refitting is the reverse of
removal. Fit a new gasket to the lower sump
section on models with the M40 engine.
16On completion refill the engine with oil
(Chapter 1). Run the engine

Page 62 of 228

BMW 3 SERIES 1991 E30 Workshop Manual detach them. Pieces of masking tape with
numbers or letters written on them work well
(see illustration).
6Label and detach all coolant hoses from the
engine (see Chapter 3).
7Remove the cooling fan,

Page 79 of 228

BMW 3 SERIES 1991 E30 Workshop Manual 3General
Coolant capacity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Chapter 1
Thermostat rating
Opening temperature  . . . . . . . . . . . . . . . . .

Page 153 of 228

BMW 3 SERIES 1991 E30 Workshop Manual the longer side of the sleeve facing towards
the centre of the vehicle.
Refitting
12Refitting is the reverse of removal. Refit
the inner pivot bolt first. Don’t fully tighten the
nuts on the pivot b