phone BMW 3 SERIES 2002 E46 Bluetooth Hadsfree Kit Upgrade Installation Instruction Manual

Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
Universal BMW Bluetooth Hands-Free Kit Upgrade
BMW 3 Series Coupé and Saloon (E


46/2/4) from 03/02
These installation instructions are only valid for cars with SA 640 (telephone preparation).
Important information
This upgrade kit is for use within the BMW dealership organisation only.
Subject to technical modifications.
Target group
The target group for these installation instructions is specialist personnel trained on BMW cars with the
appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and
work instructions in a rational order using the prescribed tools (special tools) and observing current health and
safety regulations.
Installation information
Ensure that the cables/lines are not kinked or damaged as you install them in the car.
The installed cables are to be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
Ordering instructions
Telephone console insert
The black telephone console insert is supplied in the upgrade kit.
An insert for the centre console in other colours for cars with different interior colours can be ordered if
required. See the EPC for all further ordering information.
The snap-in adapter is not supplied with the upgrade kit and must be ordered separately for the various
telephones.
List of special equipment
The following special equipment must be taken into consideration when installing the upgrade kit.
The various sections contain corresponding information.
SA 401
Tilt and slide sunroof
SA 602
On-board monitor
SA 606
Radio navigation system
SA 609
Navigation system
SA 660
BMW Reverse radio
SA 661
BMW Business radio
SA 662
BMW Business CD radio
Parts and Accessories
Installation Instructions

EN/3
Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
Contents
SectionPage
1. Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. To install and connect the universal charger/hands-free electronic control unit
(cars with SA 660/661/662 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. To install and connect the universal charger/hands-free electronic control unit
(cars with SA 602/606/609 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6. To install and connect the eject box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7. To install the hands-free microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
8. Concluding work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

EN/5
Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
2. Parts list
0
Legend
0
A Eject box
B Telephone console insert
C Holder for WDCT aerial
D WDCT aerial
E Hands-free microphone
F ULF (universal charger/hands-free electronic control unit)
G ULF holder (cars with SA 660/661/662 only)
H ULF holder (cars with SA 602/606/609 only)
I Speed nut St 4.2 (2x)
J Hexagonal nut M5 (5x)
K Hexagonal screw M5 x 14 (6x)
L Speed nut M5 (6x)
ACBD
FE
IJKL
GH
046 0979 Z

EN/6
Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
3. Installation and cabling diagram
0
Legend
A Eject box
D WDCT aerial
E Hands-free microphone
F ULF (universal charger/hands-free electronic control unit)
AE
F
D
046 0961 Z

EN/11
Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
6. To install and connect the eject box
0
0
0
00
Put the WDCT aerial
D
onto the holder
C
and screw it on
using hexagonal nuts
J
.
Connect the white FAKRA plug (1) to the WDCT aerial
D
.
0
Insert the WDCT aerial and holder
C
into the mounting in
the centre console (1).
Push on the speed nuts
I
.
0
0
Clip the eject box
A
into the telephone console insert
B
.
0
Clip the telephone console insert and eject box
A
into the
oddments box (1).
J
C
1D
046 0966 Z
IC
1
046 0967 Z
A
B
046 0774 Z0460774Z046 0968 Z
A
1
046 0969 Z

EN/13
Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
7. To install the hands-free microphone
0
00
Cars with SA 401 only
Release the tied back plug
X4221
from the standard
wiring harness and connect it to the hands-free
microphone
E
.
The arrow on the hands-free microphone
E
must
point to the front of the car.

Clip the hands-free microphone
E
into the trim (1).
0
Cars without SA 401 only
Release the tied back plug
X4221
from the standard
wiring harness and connect it to the hands-free
microphone
E
.
The arrow on the hands-free microphone
E
must
point to the front of the car.

Clip the hands-free microphone
E
into the trim (1).
E
1
X4221
046 0971 Z
E
1
X4221
046 0972 Z

EN/14
Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
8. Concluding work
0
This upgrade system does not require coding.

- Connect battery
- Conduct a brief test with DISPlus/MoDiC III/GT1.
- Synchronize the mobile phone and the universal charger/hands-free electronic control unit
- Activate the Bluetooth function of the mobile phone (see the mobile phone owner's manual)
- Press and hold the push-to-talk button for about 1 second whilst switching on terminal R
- Release the push-to-talk button. The radio display shows
"BT CONNECTION"
and the MID or on-board
monitor displays
"BLUETOOTH CONNECTION"
.
The checklamps on the MID or on-board monitor flash during the connection phase.

- Activate the "Locate Bluetooth Devices" menu on the mobile phone (see the mobile phone owner's
manual). This process may take a few minutes.
- Work through additional menus in accordance with the instructions displayed on the mobile phone
- When prompted to do so, enter the 4 digit
"BLUETOOTH PASSKEY"
(see the sticker on the owner's
manual) using the mobile phone keypad
- The radio, MID or on-board monitor displays
"SUCCESSFUL"
to confirm that synchronisation has been
carried out correctly
- Switch off the ignition – the connection is terminated
- Conduct a function test
- Assemble the car again following the instructions to dismantle it in reverse order
Refer the DIS (Diagnostic Information System) for the circuit diagram of the telephone preparation
(SA 640), if required.