ABS BMW 5 SERIES 2001 E39 Model Yar Changes
[x] Cancel search | Manufacturer: BMW, Model Year: 2001, Model line: 5 SERIES, Model: BMW 5 SERIES 2001 E39Pages: 22, PDF Size: 1.05 MB
Page 3 of 22
3
2001 model year changes
Diagnostics via the OBD II Connector
-+UNLEADED GASOLINE ONLY01220km/hMPH1/min
x1000
40 6080100120
140
160
180
200
220
2401
023
4
5
6
75030
20
15
1220406080
100
120
14011milesBRAKE ABS
1698 7541
DME
DME
AGS
I/K-BUS
IKE/KOMBI
DSC
KL 15 KL 30
TD (RPM)
TXDTXDI
I
OBD II
CONNECTOR DIS/MoDiC
CONNECTOR
KL 31
BMWDISBMW
DIS
BMWDISB
M
WD
I
S
DSC III
kjhsdfkhsdflkhsdlkfjhlkjghkg
lkdkfljdflkjdsfljdslfjldskjflkjdflk
ldsflsdfklhdsfhsdfhsdkhfkhsdf
kldjfkljdfkjdskfkjdskfjkljdfkldsfk
kjsdfkljsdfkdsfkjdsfkljsdfkjds
ldjsfklkjsdfkldsjfkdsjfkdsfkdfklk
Page 4 of 22
4
2001 model year changes
INSTRUMENT CLUSTER SIA RESET
Model: E38,E39,E46,E52,E53
Production Date: E46 from 9/99
E38,E39,E53 from 9/00
On 2001 vehicles without the diagnostic connector in the engine compartment, the use of
the SIA reset tool is not possible. The service indicator may be reset using the reset mode
in the instrument cluster.
Reset procedure for high and low clusters with SIA III using the Reset Mode:
• Ignition key must be “off”
Press and hold the trip odometer reset button in the instrument cluster (left button), and
turn the ignition key to the first position.
Keep the button pressed for approximately 5 seconds until one of the following words
appear in the display: “OIL SERVICE, or “INSPECTION”, with “RESET”.
The service due is shown with “reset” if the coded minimum consumption limit has been
reached and resetting is possible. If “reset” is not shown, the minimum limit has not been
reached and resetting is not possible.
Press and hold the reset button again until the word “RESET” begins to flash.
½
P
1
20406080100
120
1400234
5
6
7
!ABS
miles
0
10
15 20 40
+
TURN THE KEY TO
POSITION 1 (KL R)PRESS AND HOLD
LEFT BUTTON.
KEEP PRESSED FOR
5 SECONDS AFTER
KEY IS SWITCHED
ON.
TAP BUTTON TO
RESET DISPLAY.
12
Service interval reset: high cluster