alternator belt BMW 645Ci COUPE 2005 E63 N62B44 Engine Workshop Manual

Downloaded from www.Manualslib.com manuals search engine Table of Contents
SubjectPage
N62B44 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Objectives of the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Purpose of the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Engine Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Components
Fresh Air System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
- Air Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
- Throttle Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
- Intake Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
- Crankcase Venting System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Exhaust System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
- Exhaust Manifold with Catalytic Converter . . . . . . . . . . . . . . . . . . . . . . . 13
- Silencers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
- Secondary Air System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Ancillary Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
- Belt Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
- Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
- Air Conditioning Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
- Starter Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
- Power Steering Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cylinder Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
- Engine Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
- Valve Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
- Valvetronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
- Bi-VANOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
- Vacuum Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
- Chain Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Downloaded from www.Manualslib.com manuals search engine Ancillary Components and Drive Belts
Drive Belts
The belt drive has two components and is subdivided into the main and A/C drives. Both
belts are driven by the crankshaft pulley.
A 4 rib belt is used to drive the air conditioning compressor and a 6 rib belt is used for the
main drive. Each drive belt has a maintenance free tensioning unit with tensioning pulley
and torsioner.
T To
o
r
re
em
mo
ov
ve
e
t
th
he
e
d
dr
ri
iv
ve
e
b
be
el
lt
t:
:
The tensioning pulley is pushed back using a
Torx tool in the recess provided (1) and fixed in
this position by inserting a locking pin as shown
(2).
16
N62 Engine
42-02-15 Ancillary Components and
Drive Belts
1. Air Conditioning Compressor
2. 4 Rib A/C Drive Belt
3. Crankshaft Pulley
4. Water Pump
5. Tensioning Unit Main Drive Belt
6. Alternator
7. Deflection Pulley
8. Power Steering Pump
9. 6 Rib Drive Belt
10. Tensioner Unit A/C Drive Belt
42-02-16

Downloaded from www.Manualslib.com manuals search engine The ECM takes on the following functions:
• Activation/deactivation of the alternator.
• Informing the alternator regulator of the nominal voltage value to be set.
• Controlling the alternator's response to load.
• Diagnosing the data line between the alternator and the ECM.
• Storing alternator fault codes.
• Activating the charge indicator lamp in the instrument cluster.
The connection with the ECM makes it possible to equalize the alternator load torque for
nearly all operating conditions. This supports the engine idling speed control and the bat-
tery load balance. In addition, the ECM receives information from the Power Module about
the battery's calculated temperature and charge status. This means that alternator output
can be adapted precisely to the temperature and load status of the battery which increas-
es the battery service life.
The charge indicator display strategy has not changed in comparison with the alternators
currently in use. Regulating the alternator output is particularly important when activating
Valvetronic operating motors.
A temperature protection function is implemented in the voltage regulator. If the alternator
overheats, the alternator voltage is reduced until an appropriate temperature has been
reached.
T Th
he
e
E
EC
CM
M
c
ca
an
n
r
re
ec
co
og
gn
ni
iz
ze
e
t
th
he
e
f
fo
ol
ll
lo
ow
wi
in
ng
g
f
fa
au
ul
lt
ts
s:
:
• Mechanical faults such as blockages or belt drive failure.
• Electrical faults such as exciter diode defects or over/under voltage caused by regula-
tion defects.
• Connection defects between the ECM and the alternator.
C Co
oi
il
l
b
br
re
ea
ak
ks
s
a
an
nd
d
s
sh
ho
or
rt
t-
-c
ci
ir
rc
cu
ui
it
ts
s
c
ca
an
nn
no
ot
t
b
be
e
r
re
ec
co
og
gn
ni
iz
ze
ed
d.
.
T
Th
he
e
b
ba
as
si
ic
c
a
al
lt
te
er
rn
na
at
to
or
r
f
fu
un
nc
ct
ti
io
on
n
i
is
s
i
in
n
o op
pe
er
ra
at
ti
io
on
n
e
ev
ve
en
n
i
if
f
t
th
he
e
B
BS
SD
D
i
in
nt
te
er
rf
fa
ac
ce
e
f
fa
ai
il
ls
s.
.
18
N62 Engine