brakes BMW 7 SERIES LONG 2008 E66 Service and warranty information
[x] Cancel search | Manufacturer: BMW, Model Year: 2008, Model line: 7 SERIES LONG, Model: BMW 7 SERIES LONG 2008 E66Pages: 54, PDF Size: 2.07 MB
Page 6 of 54
Oil changes performed outside the recom-
mended maintenance intervals as indicated
by the Service Interval Display
Maintenance Upgrade Option
Please contact your authorized BMW center for
information and availability on the optional Main-
tenance Program Upgrade for coverage up to
6 years and 100,000 miles
Intervals
Time intervals should be followed using the
maintenance intervals as indicated by the BMW
Service Interval Display.
Maintenance intervals on motor vehicles have
conventionally been specified based upon accu-
mulated mileage. However, driving conditions
have a major influence on routine maintenance
requirements; distance traveled is only one of
the significant factors. A vehicle driven for
50,000 miles of short trips in the city with
numerous cold starts, prolonged periods of
idling, stop-and-go driving, and high engine
speeds during acceleration requires more fre-
quent maintenance intervals than a vehicle
driven for 50,000 miles for long distances at low
engine speeds primarily at operating tempera-
ture.
The advanced technologies at BMW have led to
the development of the unique BMW Condition
Based Service (CBS) system which computes
the actual optimum maintenance requirements
based not only upon the accumulated mileage,
but taking into account important factors such
as high or low engine speeds, short or long trip
driving, and condition of the engine oil and
brake pads.
Condition Based Service (CBS)
CBS is a further development of the Service
Interval Indicator System. Sensors and sophisti-
cated algorithms take even more detailed
account of the various conditions of vehicle use. The remaining times for selected maintenance
tasks as well as any legally prescribed dates are
displayed to you individually:
Engine oil
Brakes - front and rear separately
Microfilter
Brake fluid
Spark plugs
Vehicle check
Required State Inspection(s)
CBS thus determines the current and future
maintenance requirements. This data can also
be read from the vehicle key by your BMW Ser-
vice Advisor and used to propose the optimum
scope of maintenance.
Disconnecting the battery during periods
of long-term storage will interrupt the
calculation of time-based services. Have all
items requiring time-based maintenance, such
as brake fluid and coolant, and possibly also the
engine oil and microfilter, brought up to date by
your BMW center. Also see the section on bat-
tery care on page 15 of this statement.
Service Interval Display
Info Display screen contents
The distance remaining until your next service
briefly appears when you switch on the ignition.
The Info Display immediately switches to
its compute mode when you press one of
the two buttons in the turn signal indicator
lever.
2
Page 9 of 54
Standard operations
Maintenance work:
Brief diagnostic test
Verify Check Control messages
Check indicator and warning lights
Reset CBS display
Engine oil
Maintenance work:
Change the engine oil and oil filter. We rec-
ommend BMW High Performance 5W-30
Synthetic Oil P/N 07 51 0 017 866.
After every 3rd engine oil change: Intake air
cleaner: replace air filter element (reduce
replacement interval in dusty operating
conditions).
Parking brake: check function
Microfilter
Maintenance work:
Automatic air conditioning: Replace microfilter
Front brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
Rear brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
Parking brake: Check condition, brake lining
thickness and function, if necessary replace
at extra charge.*
*Unless covered by Maintenance Program
Vehicle Check
Maintenance work:
Check operation of horn, headlight flasher
and hazard warning flashers.
Check instrument and control lighting and
heater/air-conditioning blower.
Check lighting system: turn signals, back-up,
license plate, interior (incl. map, reading
lights), glovebox, flashlight, luggage area
lights.
Safety belts: check condition and function.
Check windshield wiper and washer jet
positions.
Body: check for corrosion (except cavities).
Tires: check tread depth, wear pattern, outer
condition, inflation pressure (also spare tire). If
necessary, correct pressure (also spare).
Reset tire pressure monitor.
Battery: check state of charge (magic eye)
and charge if required.
Power steering reservoir: Check fluid level.
Visually inspect all SRS airbag units for torn
covers, obvious damage or attachment of
stickers.
Rear-view mirrors
Coolant: check fluid level and concentration.
Windshield washer and intensive cleaning
system: check protection level, fluid level, top
if necessary.
Brake system connections and lines: check
for leaks, damage and correct positioning.
Underbody, incl. all visible parts (i.e. transmis-
sion, rear axle, fuel lines, exhaust system),
check for damage, leaks and corrosion.
Steering components: check for clearance,
leaks, damage and wear.
Final Inspection: Road test with check of
–Brakes
– Steering
– Shock absorbers (visual)
– Gearbox
5