light BMW M ROADSTER COUPE 2001 Owner's Guide

120n
Caring for your vehicleWindow careYou can use window and glass cleaner
to clean inside window surfaces and
mirrors without smearing and streaking.
Never use polishing pastes or abrasive
(quartz) cleansers on mirror lenses!
Clean the wiper blades with soapy
water. The wiper blades should be
replaced twice a year, before and after
the cold season.
Use only wiper blades which have
been approved by BMW.<
Caring for other vehicle
components and materialsLight-alloy wheels should be treated
with alloy wheel cleaner, particularly
during the winter months. Do not use
aggressive products containing acids,
strong alkalis or abrasives. Alloy wheels
should not be cleaned with a steam jet
operating at temperatures in excess of
+140 7 (+60 6). Follow the manufac-
turer's instructions.
If your vehicle is equipped with chromed
parts
* such as window frames, door
handles, etc., clean these parts thor-
oughly with plenty of water and, if they
are exposed to the effects of salt, also
with a shampoo additive. Use chrome
polish for additional treatment.
Plastic components, vinyl upholstery,
the headliners, lamp lenses, the clear
cover of the instrument cluster and
components with a sprayed dull black
surface can be cleaned with water (add
plastic shampoo as required). Do not
allow moisture to soak through the
seats or headliner. Never use solvents
such as lacquer thinner, heavy-duty
grease remover, fuels, etc.
Rubber components should be cleaned
with water only; a rubber treatment or
silicone spray may also be applied.The safety belts should be cleaned with
a mild soap and water solution without
being removed from the vehicle. Never
attempt chemical or dry cleaning, since
this could cause damage to the belt
fabric.
After cleaning, never allow the inertia
reels to retract the belts until they are
completely dry. Dirty safety belts
prevent the inertia reel mechanism from
retracting the strap properly, and thus
constitute a safety hazard.
Heavily soiled floor carpets and mats
*
can be cleaned with an interior cleaner.
The floor mats can be removed from
the vehicle for cleaning.
Please use only a damp cloth to clean
wooden fascia panels and components.
Follow up by drying with a soft cloth.
Use the cleaning and car-care
products that you can obtain at
your BMW center.<
ProCarManuals.com

121n
IndexDataTechnologyRepairsCar careControlsOverview
Caring for your vehicleCare of upholstery materials Depressions formed in the upholstered
materials in the course of everyday use
can be brushed up working with a
lightly dampened brush "against the
nap."
The tendency of the pile to lie in a
particular direction on velour upholstery
is not a quality defect, and, just as on
home textiles or clothing, cannot be
avoided.
Fuzz on upholstery materials, rubbed-in
fabric or suede residues can be
removed with a fuzz or Velcro® brush. A
cleaning glove is available for particu-
larly "stubborn" lint. Remove spots and
larger soiled areas immediately with
luke-warm water, an interior cleaner, a
spot remover or appropriate cleaning
fluid. Brush the fabric afterwards to
restore its appearance.
If the vehicle will be stored for an
extended period or if it is exposed to
intense sunlight, cover all the seats or
the windows to prevent fading (road-
ster: convertible top closed).
Use the cleaning and car-care
products that you can obtain at
your BMW center.<
The buildup of an electrostatic charge
on the seat covers, particularly if atmo-
spheric humidity is low, can give the
occupants an unpleasant electric shock
if they touch metal body parts after
leaving the vehicle. Although this is
not dangerous in any way, it can be
avoided by touching a bare or polished
metal part of the vehicle while getting
out.
Leather careThe leather
* upholstery used by BMW
is a natural product of the highest
quality, processed using state-of-the-
art methods to ensure that it will main-
tain its high quality for years to come,
provided that it is properly cared for.
As this product is manufactured using
natural materials, you must make allow-
ances for special characteristics and
possible surface irregularities. You
should also bear in mind that this kind
of material requires special care and
attention.
Regular cleaning and care are essen-
tial, since dust and road dirt act as
abrasives in the pores and creases of
the material. This leads to wear spots
and premature brittleness on the
surface of the leather. We therefore
suggest that you clean the leather with
a vacuum cleaner or dust cloth at
frequent intervals.
For cleaning, use BMW leather cleaning
foam.
Since dirt and grease gradually attack
the protective layer of the leather, the
cleaned surfaces should be treated
with BMW leather care agent. This also
acts as an antistatic agent.
ProCarManuals.com

122n
Caring for your vehicle AirbagsTo protect the leather from dampness
or moisture, you can treat it with a
BMW impregnating agent.
We recommend that you perform this
procedure twice a year on leather
exposed to normal use.
Spilled liquids should be wiped up
immediately, and greasy and oily stains
dabbed with a stain remover.
If the upholstery is to be exposed to
intense sunlight or if the vehicle is to be
stored for an extended period, cover all
leather surfaces (or, better yet, the
windows) to prevent fading.
Use the cleaning and car-care
products that you can obtain at
your BMW center.<
Cleaning agents can contain
substances which are dangerous
or which pose health risks. Therefore,
always comply with the warnings and
danger notices on the package.
Open the doors or windows on your
vehicle when cleaning the interior
(when the roadster's convertible top is
closed). Never clean your vehicle with
solvents or other materials not specifi-
cally intended for this application.<
1 Front airbags on the driver and
passenger side
2 Side airbags on the driver and
passenger sideImportant safety notices
Do not attempt to remove the gas
generators of the airbag restraint
system from the vehicle or to disas-
semble them.
Have inspection and service proce-
dures performed by specially-trained
personnel only.
If the airbag restraint system malfunc-
tions, is deactivated or triggered as a
response to an accident, have the
system repaired or disassembled by a
BMW center only.
36mde786
Do not make modifications of any kind
to the individual components or system
wiring. These include the upholstered
covers on the steering wheel hub, in the
instrument panel and in the side trim
panels of the doors. Never apply adhe-
sive materials to these components or
cover or modify them in any way. Do
not attempt to disassemble the steering
wheel itself.
To ensure compliance with applicable
safety regulations, have the airbag
generators disposed of by an BMW
center only.
Unprofessional attempts to service the
system could lead to failure in an emer-
gency or undesired airbag activation,
either of which could result in personal
injury.<
ProCarManuals.com

124n
Any BMW center will be happy to
advise you concerning the advisability,
legal implications and factory recom-
mendations for technical modifications
to the vehicle. For this purpose, the
BMW center will require the Vehicle
Identification Number. The engine
number is also required in some
instances.
Light-Emitting Diodes (LEDs)Light-emitting diodes installed behind
translucent lenses serve as the light
source for many of the controls and
displays in your vehicle. These LEDs
are similar to laser technology.
Do not remove the protective lens
and avoid staring directly at the
unfiltered beam for extended periods
(several hours), since inflammation of
the iris could result.<
California laws require us to state the
following warning:
Engine exhaust, some of its
constituents, and certain vehicle
components contain or emit chemicals
known to the State of California to
cause cancer and birth defects or other
reproductive harm.<
Technical modifications California Proposition 65 Warning
ProCarManuals.com

125n
IndexDataTechnologyRepairsCar careControlsOverview
OBD connectorThe connector for the Onboard Diag-
nostic system (OBD) is located in the
center console under a cover on the
passenger's side (arrow).
The purpose of the OBD system is to
ensure proper operation of the emis-
sion control system throughout the
vehicle's lifetime by monitoring emis-
sion-related components and systems
for deterioration and malfunction.367us235
An illuminated indicator informs
you of the need for service,
but not of the need to stop the
vehicle. However, the systems should
be checked by your BMW center at the
earliest possible opportunity.
Under certain conditions, the indicator
will blink or flash. This indicates a rather
severe level of engine misfire. When
this occurs, you should reduce speed
and consult the nearest BMW center as
soon as possible. Severe engine misfire
over only a short period of time can
seriously damage emission control
components, especially the catalytic
converter.
Service Engine Soon warning
lamp for Canadian models.
When the filler cap is not properly
tightened, the OBD system can
detect the vapor leak and the indicator
will light up. If the filler cap is subse-
quently tightened, the indicator should
go out within a few days.<
ProCarManuals.com

130n
Lamps and bulbsPosition lamps5 watt bulb
1 Using your fingertip, press forward on
the rear edge of the lamp's cover
(arrow) and remove.
2 Turn the bulb holder with the bulb to
the right and remove it from the lamp.
3 Pull the bulb out of the socket and
replace.
4 Install in the reverse order.367de737
Front turn signal indicators21 watt bulb
1 Turn the bulb holder with the bulb to
the left and remove toward the rear.
2 Applying light pressure, turn the bulb
to the left. Remove and exchange the
bulb.
3 Insert the bulb holder and turn to the
right as far as possible.367de068
Side turn signals5 watt bulb
1 Using your fingertip, press toward the
rear on the front edge of the lamp's
cover (arrow) and remove.
2 Turn the bulb holder with the bulb to
the right and remove it from the lamp.
3 Pull the bulb out of the socket and
replace.
4 Install in the reverse order.36mde776
ProCarManuals.com

134n
Lamps and bulbs Master key with battery-powered lampInterior lamps – M coupeFront:
15 watt bulb
1 Use a screwdriver to press out the
lamp at the left recess.
2 Press back the plastic tab on the
reflector, open the reflector and
replace the bulb.
Rear:
10 watt bulb
1 Use a screwdriver to press out the
lamp at the side recess.
2 Press back the plastic tab on the
reflector, open the reflector and
replace the bulb.Reading lamps – M coupe10 watt bulbs
1 Use a screwdriver to press out the
lamp at the left recess.
2 Press gently while turning the defec-
tive bulb to the left. Remove the bulb
and replace it.If light intensity drops, renew the
battery to safeguard against acid
escaping.
Battery change1 Remove the cover on the back of the
key with a screwdriver.
2 Insert a new battery (refer to the illus-
tration) of the same type (CR 2025)
so that it touches the contacts.
3 Snap the cover into place and apply
uniform pressure to seat it.365de132
Return used batteries to a
recycling point or to your BMW
center.<
ProCarManuals.com

136n
Repairing a flat tireThe M Mobility system is located in the
luggage compartment at the rear right,
on the M coupe also under a cover.36mde778
M roadster
Release the cover on the M coupe:
1 Fold the luggage compartment floor
mat up.
2 To release, turn the four mounting
clips (arrows) of the right-hand trim
panel on the rear wall of the luggage
compartment approx. f turn with a
coin or screwdriver.
3 Pull out the clips and remove the trim
panel.
Note that the fluid bottle in the
system's sealant container must
be replaced every 3 years by your BMW
center if the system is not used.<367de322
M coupe
The components of the M Mobility
system1 On/Off switch
2 Connection hose with pressure
gauge for connecting the compressor
with the sealant container or to
connect the compressor to the wheel
3 Pressure gauge for indicating the tire
pressure
4 Connector hose from the sealant
container to the wheel
5 Sticker for maximum speed
6 Plug and cable for the cigarette
lighter socket
7 Protective gloves (not shown)39mde106
ProCarManuals.com

137n
IndexDataTechnologyRepairsCar careControlsOverview
Repairing a flat tireUsing the M Mobility system Release the securing device of the
M Mobility system and remove the
system from the luggage compartment.
If possible, leave the foreign
object in the tire.<
Do not exceed the maximum
speed limits described below,
otherwise accidents could result.
Before you use the M Mobility system,
read the warnings and danger notices
on the device carefully.<
1 Pull sticker 5 off for maximum speed
and affix it to the steering wheel.
2 Remove the round cover and take out
hose 4. Unscrew the valve stem
cover from the defective wheel and
screw the hose to the valve.39mde105
3 Flip open the cover and pull out the
enclosed protective gloves. Take out
hose 2 with the pressure gauge and
screw it to the terminal for the sealant
container as shown in the illustration.
4 Make sure that the system has been
switched off (position 0).
Take out the plug 6 and insert it into
the cigarette lighter socket in the
passenger compartment (refer to
page 80).39mde107
ProCarManuals.com

138n
Repairing a flat tire5 Make sure that the screw on the rear
of pressure gauge 3 is tightened
down. Turn on the M Mobility system
(position I, refer to illustration) and
allow three minutes to elapse to let
the sealant flow in. It does not matter
afterward what the tire's inflation
pressure is.
6 Turn the device off.
Disconnect the connector hose from
the sealant container and the tire
valve. Stow the M Mobility system in
the luggage compartment.39mde108
7 Then immediately drive at least
1.2 miles (2 km), so that the liquid
sealant distributes evenly throughout
the inside of the tire.
Do not exceed 40 mph (60 km/h), and
if possible, do not drop below
15 mph (20 km/h).
Stop at an appropriate spot.
8 Take out the hose with the pressure
gauge and screw it onto the valve.
Take out the plug and plug it into the
cigarette lighter socket in the
passenger compartment.
9 Reset the inflation pressure to 29 psi
(200 kPa):
>To increase the tire pressure: turn
on the M Mobility system
(position I). To check the current
setting for the tire pressure briefly
turn off the device.
>To reduce the tire pressure: turn
the screw on the back of the pres-
sure gauge; a valve located there
will open.
39mde109
ProCarManuals.com