check oil BMW M3 2016 F80 Owner's Manual
[x] Cancel search | Manufacturer: BMW, Model Year: 2016, Model line: M3, Model: BMW M3 2016 F80Pages: 226, PDF Size: 4.86 MB
Page 80 of 226

DisplaysVehicle features and optionsThis chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due tothe selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.
Overview, instrument cluster
1Fuel gauge   802Speedometer3Messages, e.g. Check Control4Tachometer   80Shift point indicator   925Engine oil temperature   806Current fuel consumption7Electronic displays  768Reset miles  81
Electronic displays
▷Selection lists, refer to page  86.▷External temperature, refer to page  81.▷Auto Start/Stop function, refer to page  64.▷On-board computer, refer to page  86.▷Date, refer to page  81.▷Digital tachometer, refer to page  81.Seite 76ControlsDisplays76
Online Edition for Part no. 01 40 2 960 759 - II/15 
Page 84 of 226

Display additional information about the
Check Control message in the Integrated
Owner's Manual.▷  "Service request"
Contact your service center.▷  "Roadside Assistance"
Contact Roadside Assistance.
Hiding Check Control messages
Press the onboard computer button on the
turn signal lever.
▷Some Check Control messages are dis‐
played continuously and are not cleared
until the malfunction is eliminated. If sev‐
eral malfunctions occur at once, the mes‐
sages are displayed consecutively.
These messages can be faded for approx.
8 seconds. After this time, they are dis‐
played again automatically.▷Other Check Control messages are faded
automatically after approx. 20 seconds.
They are stored and can be displayed
again later.
Displaying stored Check Control
messages
On the Control Display:
1."Vehicle info"2."Vehicle status"3.  "Check Control"4.Select the text message.Messages after trip completion Special messages displayed while driving are
displayed again after the ignition is switched
off.
Fuel gauge Vehicle tilt position may cause
the display to vary.
Depending on the equipment
version, the arrow beside the
fuel pump symbol shows which
side of the vehicle the fuel filler flap is on.
Hints on refueling, refer to page  168.
Tachometer The yellow and red LEDs displaythe permitted speed range. The
permitted engine speed in‐
creases as the engine oil tem‐
perature increases.
Avoid engine speeds in the yellow warning field.
Always avoid engine speeds in the red warning
field. In this range, the fuel supply is inter‐
rupted to protect the engine.
Engine oil temperature▷Cold engine: the pointer is at
the low temperature end.
Drive at moderate engine
and vehicle speeds.▷Normal operating tempera‐
ture: the pointer is in the
middle or in the left half of
the temperature display.▷Hot engine: the pointer is at the high end of
the temperature range. A Check Control
message is also displayed.Seite 80ControlsDisplays80
Online Edition for Part no. 01 40 2 960 759 - II/15 
Page 159 of 226

Drivetrain
With this vehicle, particular value was placed
on the direct connection from engine to the
drivetrain. Due to the torsionally rigid design of
the drivetrain, as is typical in a sports car, the
transmission of the torque also gives acoustic
feedback.
When there are load changes, this may result
in clicking noises. The do not cause any im‐
pairment of the operation or the service life of
the components.
Driving on racetracks
Requirements
Before driving on a racetrack:▷Participation in BMW Driver Experience
Training.▷Check engine oil fill level and replenish as
necessary.▷Have vehicle checked at a service center.
Hints
Racetrack operation leads to increased wear.
The vehicle is not designed for motorsports
competitive use. This wear is not covered by
the warranty.
The standard brake linings and the wear indi‐
cators are not designed for racetrack opera‐
tion. For more information and advice, contact
your service center.
Seite 155BMW M3 technologyDriving tips155
Online Edition for Part no. 01 40 2 960 759 - II/15 
Page 181 of 226

Retreaded tires
Possibly substantial variations in the de‐
sign and age of the tire casing structures can
limit service life and have a negative impact on
road safety.◀
Winter tires
Winter tires are recommended for operating on
winter roads.
Although so-called all-season M+S tires pro‐
vide better winter traction than summer tires, they do not provide the same level of perform‐
ance as winter tires.
Maximum speed of winter tires If the maximum speed of the vehicle is higher
than the permissible speed for the winter tires,
then a respective symbol is displayed in your
field of vision. You can obtain this sign from the
tire specialist or from your service center.
Maximum speed for winter tires
Do not exceed the maximum speed for
the respective winter tires; otherwise, tire dam‐
age and accidents can occur.◀
Rotating wheels between axles The manufacturer of your vehicle advises
against switching wheels between the front
and rear axles. This can impair the handling
characteristics.
Rotating the tires is not permissible on vehi‐
cles with different tire sizes or rim sizes on the
front and rear axles.
StorageStore wheels and tires in a cool, dry place with
as little exposure to light as possible.
Always protect tires against all contact with oil,
grease and fuels.
Do not exceed the maximum tire inflation pres‐
sure indicated on the side wall of the tire.Mobility System
The concept
With the Mobility System, minor tire damage
can be sealed quickly to enable continued
travel. To accomplish this, sealant is pumped
into the tires, which seals the damage from the
inside.
The compressor can be used to check the tire
inflation pressure.
Hints▷Follow the instructions on using the Mobi‐
lity System found on the compressor and
sealant container.▷Use of the Mobility System may be ineffec‐
tive if the tire puncture measures approx.
1/8 in/4 mm or more.▷Contact the nearest service center if the
tire cannot be made drivable.▷If possible, do not remove foreign bodies
that have penetrated the tire.▷Pull the speed limit sticker off the sealant
container and apply it to the steering
wheel.▷The use of a sealant can damage the TPM
wheel electronics. In this case, have the
electronics checked at the next opportu‐
nity and have them replaced if needed.
Enclosed areas
Do not let the engine run in enclosed
areas, since breathing in exhaust fumes may
lead to loss of consciousness and death. The
exhaust gases contain carbon monoxide, an
odorless and colorless but highly toxic gas.◀
Storage The Mobility System is located under the
cargo floor panel.
Seite 177Wheels and tiresMobility177
Online Edition for Part no. 01 40 2 960 759 - II/15 
Page 187 of 226

Engine oilVehicle features and options
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.
General information The engine oil consumption is dependent on
the driving style and driving conditions.
The engine oil consumption can increase in
case of, for example:▷Sporty driving.▷Break-in the engine.▷Idling of the engine.▷Usage of non-approved engine oil grades.
Therefore, regularly check the engine oil level
after refueling.
When a dynamic driving style is used, such as
when cornering fast, the system is unable to
measure the engine oil level. With this driving
style, measure the engine oil level using a de‐
tailed measurement, refer to page  184.
The vehicle is equipped with electronic oil
measurement.
The electronic oil measurement has two meas‐
uring principles:
▷Status display▷Detailed measurementElectronic oil measurement
Status display
The concept
The engine oil level is monitored electronically
while driving and shown on the Control Dis‐
play.
If the engine oil level reaches the minimum
level, a check control message is displayed.
Requirements
A current measured value is available after ap‐
prox. 30 minutes of driving. During a shorter
trip, the status of the last, sufficiently long trip
is displayed.
With frequent short-distance trips, regularly
perform a detailed measurement.
Displaying the engine oil level
On the Control Display:1."Vehicle info"2."Vehicle status"3.  "Engine oil level"
Engine oil level display messages
Different messages appear on the display de‐
pending on the engine oil level. Pay attention
to these messages.
If the engine oil level is too low, within the next
125 miles/200 km Add engine oil, refer to
page  184.
Engine oil level too low
Add engine oil immediately; otherwise,
an insufficient amount of engine oil could re‐
sult in engine damage.◀
Take care not to add too much engine oil.
Seite 183Engine oilMobility183
Online Edition for Part no. 01 40 2 960 759 - II/15 
Page 188 of 226

Too much engine oil
Have the vehicle checked immediately;
otherwise, surplus engine oil can lead to en‐
gine damage.◀
Detailed measurement
The concept In the detailed measurement the engine oil
level is checked and displayed via a scale.
Gasoline engine:
If the engine oil level reaches the minimum
level, a check control message is displayed.
Diesel engine:
During the measurement, the idle speed is in‐
creased somewhat.
Requirements▷Vehicle is on level road.▷Manual transmission: shift lever in neutral
position, clutch and accelerator pedals not
depressed.▷M Double clutch transmission: selector
lever in selector lever position N and accel‐
erator pedal not depressed.▷Engine is running and is at operating tem‐
perature.
Performing a detailed measurement
In order to perform a detailed measurement of
the engine oil level:
1."Vehicle info"2."Vehicle status"3.  "Measure engine oil level"4."Start measurement"
The engine oil level is checked and displayed
via a scale.
Time: approx. 1 minute.
Adding engine oil
General information
Switch off the ignition and safely park the vehi‐
cle before engine oil is added.
Spilled engine oil can damage carbon parts.
Wipe up spilled motor oil using a lint-free cloth.
Oil filler neck
Only add engine oil when the message is dis‐
played in the instrument cluster. The quantity
to be added is indicated in the message dis‐
played in the instrument cluster.
Adding engine oil
Add oil within the next 125 miles/200 km;
otherwise, this may cause engine damage.◀
Do not add too much engine oil
When too much engine oil is added, im‐
mediately have the vehicle checked, otherwise,
this may cause engine damage.◀
Protect children
Keep oil, grease, etc., out of reach of chil‐
dren and observe the warnings on the contain‐
ers to prevent health risks.◀
Seite 184MobilityEngine oil184
Online Edition for Part no. 01 40 2 960 759 - II/15 
Page 192 of 226

MaintenanceVehicle features and options
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your car, e. g., due to
the selected options or country versions. This
also applies to safety-related functions and
systems. The respectively applicable country
provisions must be observed when using the
respective features and systems.
BMW maintenance system The maintenance system indicates required
maintenance measures, and thereby provides
support in maintaining road safety and the op‐
erational reliability of the vehicle.
In some cases scopes and intervals may vary
according to the country-specific version. Re‐
placement work, spare parts, fuels and lubri‐
cants and wear materials are calculated sepa‐
rately. Additional information is available from
the service center.
Condition Based Service
CBS
Sensors and special algorithms take into ac‐
count the driving conditions of your vehicle.
Based on this, Condition Based Service recog‐
nizes the maintenance requirements.
The system makes it possible to adapt the
amount of maintenance corresponding to your
user profile.
Detailed information on service requirements,
refer to page  83, can be displayed on the Con‐
trol Display.Service data in the remote control
Information on the required maintenance is
continuously stored in the remote control. Your service center will read out this data and
suggest the right array of service procedures for your vehicle.
Therefore, hand your service specialist the re‐
mote control with which the vehicle was driven
most recently.
Storage periods Storage periods during which the vehicle bat‐
tery was disconnected are not taken into ac‐
count.
If this occurs, have a service center update the
time-dependent maintenance procedures,
such as checking brake fluid and, if needed,
changing the engine oil and the microfilter/
activated-charcoal filter.
Service and Warranty
Information Booklet for US
models and Warranty and
Service Guide Booklet for
Canadian models
Please consult your Service and Warranty In‐
formation Booklet for US models and Warranty
and Service Guide Booklet for Canadian mod‐
els for additional information on service re‐
quirements.
Maintenance and repair should be performed
by your service center. Make sure to have reg‐
ular maintenance procedures recorded in the
vehicle's Service and Warranty Information
Booklet for US models, and in the Warranty
and Service Guide Booklet for Canadian mod‐
els. These entries are proof of regular mainte‐
nance.Seite 188MobilityMaintenance188
Online Edition for Part no. 01 40 2 960 759 - II/15 
Page 209 of 226

3.Switch the engine off.4.Switch on the ignition.
M double-clutch transmission:
1.Drive into the car wash.2.Engage selector lever position N.3.Switch the engine off.
In this way, the ignition remains switched
on, and a Check-Control message is dis‐
played.
The vehicle cannot be locked from the outside
when in selector lever position N. A signal
sounds when an attempt is made to lock the
vehicle.
To start the engine with manual transmission:
1.Press on the clutch pedal.2.Press the Start/Stop button.
To start the engine with a M double clutch
transmission:
1.Depress the brake pedal.2.Press the Start/Stop button.
Pressing the Start/Stop button without step‐
ping on the brake turns the ignition off.
Transmission position
Transmission position P is engaged automati‐
cally:
▷When the ignition is switched off.▷After approx. 15 minutes.
Headlights
▷Do not rub dry and do not use abrasive or
acidic cleansers.▷Soak areas that have been dirtied e. g.,
from insects, with shampoo and wash off
with water.▷Thaw ice with de-icing spray; do not use an
ice scraper.After washing the vehicle
After washing the vehicle, apply the brakes
briefly to dry them; otherwise, braking action
can be reduced and corrosion of the brake
discs can occur.
Completely remove all residues on the win‐
dows, to minimize loss of visibility due to
smearing and to reduce wiper noises and
wiper blade wear.
Vehicle care
Car care products BMW recommends using care and cleaning
products from BMW, since these have been
tested and approved.
Car care and cleaning products
Follow the instructions on the container.
When cleaning the interior, open the doors or
windows.
Only use products intended for cleaning vehi‐
cles.
Cleansers can contain substances that are
dangerous and harmful to your health.◀
Vehicle paint
Regular care contributes to driving safety and
value retention. Environmental influences in
areas with elevated air pollution or natural con‐
taminants, such as tree resin or pollen can af‐
fect the vehicle's paintwork. Tailor the fre‐
quency and extent of your car care to these
influences.
Aggressive substances such as spilled fuel, oil,
grease or bird droppings, must be removed im‐
mediately to prevent the finish from being al‐
tered or discolored.
Only use respectively approved cleaning and
care products for vehicles with matte finish.
Suitable care products for matte finishes are
available from the service center.Seite 205CareMobility205
Online Edition for Part no. 01 40 2 960 759 - II/15 
Page 217 of 226

Brightness of Control Dis‐play  90 
Bulb replacement  190 
Bulb replacement, front  191 
Bulb replacement, LED head‐ lights  192 
Bulb replacement, rear  193 
Bulb replacement, xenon headlights  191 
Bulbs and lights  190 
Button, Start/Stop  62 
Bypassing, refer to Jump- starting  199 
C
California Proposition 65 Warning  7 
Camera lenses, care  207 
Camera, rearview cam‐ era  125  
Camera, Side View  127 
Camera, Top View  129 
Can holder, refer to Cuphold‐ ers  149  
Car battery  195 
Carbon ceramic brake M  154 
Car care products  205 
Care, displays  207 
Care, vehicle  205 
Cargo  160 
Cargo area, enlarging  145 
Cargo area, storage compart‐ ments  149 
Cargo, securing  161 
Cargo straps, securing cargo  161 
Car key, refer to Remote con‐ trol  34 
Carpet, care  207 
Car wash  204 
Catalytic converter, refer to Hot exhaust system  157 
CBS Condition Based Serv‐ ice  188  CD/Multimedia, see user's
manual for Navigation, En‐
tertainment and Communi‐
cation 
Center armrest  148 
Center console  16 
Central locking system  39 
Central screen, refer to Con‐ trol Display  18 
Ceramic brake  154 
Changes, technical, refer to Safety  7 
Changing parts  190 
Changing wheels  195 
Changing wheels/tires  176 
Chassis, electronic  117 
Chassis number, see vehicle identification number  9 
Check Control  77 
Checking the engine oil level electronically  183 
Checking the oil level elec‐ tronically  183 
Children, seating position  58 
Children, transporting safely  58 
Child restraint fixing sys‐ tem  58 
Child restraint fixing system LATCH  60 
Child restraint fixing systems, mounting  58 
Child safety locks  61 
Child seat, mounting  58 
Child seats  58 
Chrome parts, care  206 
Cigarette lighter  143 
Cleaning displays  207 
Climate control  134 
Clock  81 
Closing/opening via door lock  39 
Closing/opening with remote control  37 
Clothes hooks  149 
Cockpit  14 Combination reel, refer to
Turn signals  67 
Combination switch, refer to Wiper system  67 
Comfort Access  41 
Compartments in the doors  148 
Compass  141 
Compound brake  154 
Compressor  177 
Computer, refer to On-board computer  86 
Condensation on win‐ dows  136 
Condensation under the vehi‐ cle  158  
Condition Based Service CBS  188 
Confirmation signal  44 
ConnectedDrive, see user's manual for Navigation, En‐
tertainment and Communi‐
cation 
ConnectedDrive Services 
Connecting electrical devi‐ ces  143 
Control Display  18 
Control Display, settings  89 
Controller  18, 19  
Control systems, driving sta‐ bility  114 
Convenient opening with the remote control  37 
Coolant  186 
Coolant temperature  81 
Cooling function  135 
Cooling, maximum  135 
Cooling system  186 
Cornering light  94 
Corrosion on brake discs  158 
Cosmetic mirror  143 
Courtesy lamps during un‐ locking  37 
Courtesy lamps with the vehi‐ cle locked  38 
Cruise control  120 Seite 213Everything from A to ZReference213
Online Edition for Part no. 01 40 2 960 759 - II/15 
Page 218 of 226

Cruising range 82 
Cupholders  149 
Current fuel consumption  82 
D
Damage, tires  175 
Damping control  117 
Data, technical  210 
Date  81 
Daytime running lights  94 
Defrosting, refer to Windows, defrosting  136 
Dehumidifying, air  135 
Deleting personal data  25 
Deletion of personal data  25 
Destination distance  87 
Differential lock  117 
Digital clock  81 
Digital compass  141 
Digital speed  81 
Digital tachometer  81 
Dimensions  210 
Dimmable exterior mirrors  56 
Dimmable interior rearview mirror  56 
Direction indicator, refer to Turn signals  67 
Display EfficientDynamics  83 
Display, electronic, instru‐ ment cluster  76 
Display in windshield  90 
Display lighting, refer to In‐ strument lighting  96 
Displays, cleaning  207 
Disposal, coolant  187 
Disposal, vehicle battery  196 
Distance control, refer to PDC  122 
Distance to destination  87 
Divided screen view, split screen  23 
Door lock  39 
Door lock, refer to Remote control  34 Double-clutch transmis‐
sion  70 
Drivelogic  72 
Drive mode  71 
Drive-off assistant  118 
Drive-off assistant, refer to DSC  115 
Driver assistance, refer to In‐ telligent Safety  104 
Driving Assistant, refer to In‐ telligent Safety  104 
Driving Dynamics Control  74 
Driving instructions, break- in  156  
Driving notes, general  157 
Driving on racetracks  155 
Driving program, refer to Drivelogic  72 
Driving stability control sys‐ tems  114 
Driving tips  157 
DSC Dynamic Stability Con‐ trol  115  
Dynamic driving systems  83 
Dynamic driving, system states  83 
Dynamic Stability Control DSC  115 
E EfficientDynamics  83 
Electronic displays, instru‐ ment cluster  76 
Electronic oil measure‐ ment  183 
Electronic Stability Program ESP, refer to DSC  115 
Emergency detection, remote control  35 
Emergency release, fuel filler flap  168 
Emergency Request  198 
Emergency start function, en‐ gine start  35 Emergency unlocking, trunk
lid  41 
Energy Control  82 
Energy recovery  82 
Engine, automatic Start/Stop function  64 
Engine, automatic switch- off  64 
Engine compartment  181 
Engine compartment, work‐ ing in  181 
Engine coolant  186 
Engine oil  183 
Engine oil, adding  184 
Engine oil additives  185 
Engine oil change  185 
Engine oil filler neck  184 
Engine oil temperature  80 
Engine oil types, alterna‐ tive  185 
Engine oil types, ap‐ proved  185 
Engine start during malfunc‐ tion  35 
Engine start, jump-start‐ ing  199  
Engine start, refer to Starting the engine  63 
Engine stop  63 
Engine temperature  80 
Entering a car wash  204 
Equipment, interior  139 
Error displays, see Check Control  77 
ESP Electronic Stability Pro‐ gram, refer to DSC  115 
Exchanging wheels/tires  176 
Exhaust system  157 
Exterior mirror, automatic dimming feature  56 
Exterior mirrors  55 
External start  199 
External temperature dis‐ play  81 
External temperature warn‐ ing  81 Seite 214ReferenceEverything from A to Z214
Online Edition for Part no. 01 40 2 960 759 - II/15