instrument cluster BMW MOTORRAD G 650 XCOUNTRY 2007 Rider's Manual (in English)

Table of ContentsYou can also consult the index at
the end of this Rider's Manual if
you want to find a particular topic
or item of information.
1 General instructions . . . . . 5
Overview ...................... 6
Abbreviations and symbols . . . . 6
Equipment . . . . . . .............. 6
Technical data . . .............. 7
Currency . ..................... 7
2 General views . . . . . . . . . . . . . 9
General view, left side . . . . . . . . 11
General view, right side . . . . . . 13
Underneath the seat ......... 14
Handlebar fitting, left ......... 15
Handlebar fitting, right . . . . . . . . 16
Instrument cluster . . . ......... 17
3 Status indicators . . . . . . . 19
Status indicators ............. 20
Standard warnings . . ......... 20
ABS warnings
OE
............. 23 4 Operation . . . . . . . . . . . . . . . . 27
Ignition switch and steering
lock . . . . . .
.................... 28
Multifunction display ......... 28
Lights . . . . .................... 31
Turn indicators . . ............. 32
Emergency off switch (kill
switch) . . . .................... 32
BMW Motorrad ABS
OE
...... 33
Mirrors . . . .................... 33
Spring preload . . ............. 34
Damping . .................... 35
Tyres . . . . . .................... 36
Headlight . .................... 36
Seat . . . . . . .................... 37
5 Riding . . . . . . . . . . . . . . . . . . . . 39
Safety instructions . . ......... 40
Checklist . .................... 42
Starting . . . .................... 42
Running in . . . . . . ............. 44
Brakes . . . .................... 45
Parking your motorcycle . . . . . 47
Refuelling .................... 48 6 Engineering details . . . . . 49
Brake system with BMW Mo-
torrad ABS
OE
................ 50
7 Accessories . . . . . . . . . . . . . 53
General instructions . ......... 54
Power socketOE.............. 54
Luggage . .................... 55
8 Maintenance . . . . . . . . . . . . 57
Notes ........................ 58
Toolkit ........................ 58
Engine oil .................... 59
Brake system . . . ............. 61
Brake pads . . . . . . ............. 62
Brake fluid .................... 63
Coolant . . . .................... 65
Clutch . . . . .................... 67
Tyres . . . . . .................... 68
Rims . ........................ 68
Chain . . . . . .................... 68
Wheels . . . .................... 70
BMW Motorrad auxiliary
stand . . . . . .................... 76

General views
General views
General view, left side................ 11
General view, right side . . ............ 13
Underneath the seat ................. 14
Handlebar fitting, left ................. 15
Handlebar fitting, right . . . ............ 16
Instrument cluster . . ................. 17
29zGeneral views

Instrument cluster1Set the clock ( 29)
Reset the tripmeter ( 29)
2 Telltale lights ( 20)
3 Multifunction display
( 20)
4 Select readings ( 28)
217zGeneral views

with OE BMW Motorrad ABS:Switch on the ignition.
Pre-ride check is performed.
( 43)
ABS self-diagnosis is
performed. ( 44)
Wait until the warning light for
the coolant temperature stops
flashing.
The idle actuator is posi-
tioned after you switch on
the ignition. The coolant-tem-
perature warning light flashes
if the idle actuator has not cor-
rectly positioned before the pre-
ride check completes. In order
to avoid subsequent problems,
wait for this process to complete
before proceeding. Press starter button
1.
If ambient temperatures are
very low, you might find it
necessary to open the throttle
slightly when starting the engine.
At ambient temperatures below
0 °C, disengage the clutch after
switching on the ignition.
If the engine fails to start
even though the starter
turns, insufficient battery voltage
might be causing the problem.
Recharge the battery before you
start the engine, or use jump
leads and a donor battery to
start. The engine starts.
Consult the troubleshooting
chart below if the engine re-
fuses to start. ( 98)
Pre-ride checkThe instrument cluster runs a
test of the instruments and the
warning lights and telltale lights
and the display when the igni-
tion is switched on. This test is
known as the "Pre-Ride-Check".
Phase 1
All the telltale and warning lights
are switched on briefly, along
with all the segments of the mul-
tifunction display.
Phase 2
The tyre parameters stored in
the memory of the instrument
cluster appear briefly on the dis-
play.
The instrument cluster then
reverts to its normal operating
mode.
543zRiding

Care productsBMW Motorrad recommends
that you use the cleaning and
care products you can obtain
from your authorised BMW Mo-
torrad dealer. The substances in
BMW Care Products have been
tested in laboratories and in prac-
tice; they provide optimised care
and protection for the materials
used in your vehicle.The use of unsuitable
cleaning and care products
can damage vehicle components.
Do not use solvents such as cel-
lulose thinners, cold cleaners,
fuel or the like, and do not use
cleaning products that contain
alcohol.Washing motorcycleBMW Motorrad recommends
that you use BMW insect re-
mover to soften and wash off
insects and stubborn dirt on painted parts prior to washing
the motorcycle.
To prevent stains, do not wash
the motorcycle immediately after
it has been exposed to strong
sunlight and do not wash it in the
sun.
Make sure that the motorcycle
is washed frequently, especially
during the winter months.
To remove road salt, clean the
motorcycle with cold water im-
mediately after every trip.
After the motorcycle has
been washed, ridden
through water or ridden in
the rain, the brake discs and
pads might be wet and the
brakes might not take effect
immediately.
Apply the brakes in good time
until the brakes have dried out.
Warm water intensifies the
effect of salt. Use only cold water to wash off
road salt.
The high pressure of steam
cleaners can damage seals,
the hydraulic brake system, the
electrical system, and the seat.
Do not use a steam jet or high-
pressure cleaning equipment.
Cleaning easily
damaged componentsPlasticsClean plastic parts with water
and BMW plastic care emulsion.
This includes in particular:
Windscreen and slipstream de-
flectors
Headlight lens made of plastic
Glass cover of the instrument
cluster
Black, unpainted parts
If plastic parts are cleaned
using unsuitable cleaning
994zCare

Display, 28Overview, 20
Selecting readings, 17, 28
E
Electrics Technical data, 105
Emergency off switch (kill switch), 16, 32
Engine Starting, 16, 42
Technical data, 100
Engine oil Checking level, 59
Filler neck, 14
Oil dipstick, 14
Technical data, 101
Topping up, 61
Engine oil pressure Warning, 22
Equipment, 6
F
Frame Technical data, 107
Front-wheel stand, 77 Fuel
Filler neck, 13
Refuelling, 48
Technical data, 4, 101
Warning, 22
Fuses, 14, 79 ABS, 79
G
General views Display, 20
Instrument cluster, 17
Left handlebar fitting, 15
Left side, 11
Right handlebar fitting, 16
Right side, 13
Status indicators, 20
Telltale lights, 20
Underneath the seat, 14
Warnings, 20
H
Handlebar fitting, left Overview, 15
Handlebar fitting, right Overview, 16 Headlight
Beam throw, 37
Driving on right/driving on
left, 36
Replacing low-beam headlight
bulb, 81
Replacing side-light bulb, 83
Headlight flasher, 15, 31
High-beam headlight Switch, 15
Telltale light, 20
Horn, 15
I
Idle Telltale light, 20
Ignition Switching on and off, 28
Ignition switch, 28
Instrument cluster Overview, 17
J
Jump starting, 87
12120zIndex