display BMW X2 2023 Owner's Manual

The status is displayed.
Initialization required An initialization must be performed in the fol

tem reduces the speed to the set value, within
the physical limits.
Only use Hill Descent Control in low gears or in selector lever position D or R.
Overview Button in the vehicle
Hill Descent Control
Activate Hill Descent Control Press the button. The LED above the
button lights up.
Speeds between approx. 2 mph/3 km/h and approx. 20 mph/30 km/h are adopted as theset speed.
Display in the instrument cluster An icon and the selected desired
speed are displayed.

The indicator lights in the instrument clusterlight up and the mark in the speedometer is set
to the current speed.
Cruise control is active and maintains the set
speed.
If necessary, the Dynamic Stability Control will be turned on.
Turning off
To switch off the system while standing, step on brake pedal at the same time.
Press the button on the steering
wheel.
The displays turn off. The stored set speed is
deleted.
Interrupting manually Press the button on the steering
wheel.
If interrupting the system while stationary,
press on the brake pedal at the same time.
Interrupting automatically The system is automatically interrupted in thefollowing situations:

is being pressed; a vehicle was detected.
Displays in the Head

The rearview camera image is displayed if the
reverse gear is engaged when pressing the
park assistance button.
Depending on the equipment version, the sys

3Air flow4Air flow display5Air recirculation mode6Temperature7Seat heating, right 828Rear window defroster9Seat heating, left 82Climate control functions in detail
Switching the system on/off Turning on
Press any button except for the following:

LED displaysColorMeaningBlueThe mobile phone is charging.
Depending on the model and the ve

General information
The system includes the following
EfficientDynamics functions and
EfficientDynamics displays:

Displaying consumption history
The average consumption can be displayed on the Control Display.
Via iDrive:1."My Vehicle"2."Technology in action"3."EfficientDynamics"4. Select the icon.
Vertical bars show consumption for the se

Activating/deactivating coasting via
shift paddles1.Shift to the highest gear by pulling the right
shift paddle.2.To activate Coasting mode, actuate the right shift paddle again.
To deactivate, actuate the left shift paddle.
Display
Display in the instrument cluster
The tachometer shows the idle speed. The mark in the efficiency display is backlit inblue and is located at the zero point. The
coasting point indicator is illuminated at the zero point during coasting.
Indications on the Control Display The Coasting mode is displayed in
EfficientDynamics while driving.
The distance traveled in Coasting mode is shown in the consumption history. The meterreading is reset prior to every departure.
Displaying EfficientDynamics
information
Via iDrive:
1."My Vehicle"2."Technology in action"3."EfficientDynamics"4. Select the icon.
System limits
The function is not available if one of the fol