BMW X5 4.4I 2006 E53 Workshop Manual

51n
OverviewControlsMaintenanceRepairsDataIndex
Seat, mirror and steering wheel memory
*
Calling up a stored setting
Do not call up a position from the
memory while the vehicle is mov-
ing. There is a risk of accident from
unexpected movement of the seat or
steering wheel.<
Convenience function:
1. Open the driver's door after unlock-
ing the vehicle or place the ignition
key in position 1
2. Briefly press memory button 1, 2
or 3, as desired.
Movement stops immediately when
one of the seat-adjustment or mem-
ory buttons is activated during the
adjustment process.
Security function:
1. With the driver's door closed and the
ignition key either removed or in
position 0 or 2
2. Maintain pressure on the desired
memory button 1, 2 or 3 until the
adjustment process is completed.
If you press the
M
EMORY button
accidentally: press the button
again – the LED goes out.<
You can have your vehicle pro-
grammed to automatically dial in
your own individual adjustment settings
for the seat, mirrors and steering wheel
whenever you use your personal
remote control to unlock the vehicle.<
If you make use of this function,
be sure that the footwell behind
the driver's seat is unobstructed before
unlocking the vehicle. If you fail to do
so, any persons or objects behind the
seat could be injured or damaged by a
rearward movement of the seat.<
Passenger-side exterior mirror
tilt function Automatic curb monitor
Activating:
1. Select the driver's mirror with the
mirror selection switch
2. When you engage reverse gear or
selector-lever position R, the exterior
mirror glass on the front passenger
side tilts downward slightly. This
allows the driver to see the area
immediately adjacent to the vehicle –
such as a curb – when parking, etc.
Deactivating:
Slide the mirror selection switch to the
passenger's side position.530us214

52n
Heated seats
*
Steering wheel
Front The seat cushion and backrest can be
heated when the ignition key is in posi-
tion 2.
You can call up different heating modes
by repeatedly pressing the button.
You can also switch off the higher heat-
ing modes directly:
Press the button and hold it slightly
longer.530de417
Rear The operating concept is the same as
for the front heated seats. You can
select between two heating modes.530de234
Adjustments The steering wheel can be moved in
any of four directions. Adjust the steer-
ing wheel by moving the control lever in
the desired direction.
Do not adjust the steering wheel
while the vehicle is moving. There
is a risk of accident from unexpected
movement.<
To store the steering wheel setting,
refer to Seat, mirror and steering wheel
memory on page50. 530de255

53n
OverviewControlsMaintenanceRepairsDataIndex
Steering wheel Steering wheel heater
*
Mirrors
Automatic steering wheel
adjustmentonly in conjunction with seat, mirror and
steering wheel memory
In or der to m a ke it e asie r t o get in to an d
out of the vehicle, the steering wheel
automatically moves into the top posi-
tion and returns to the driving or mem-
ory position.
This automatic feature is influenced by
the position of the ignition key and by
the driver's door.
The steering wheel heater functions in
ignition key position 2.
Press the button to activate or deacti-
vate this system.
The LED in the button lights up when
the steering wheel heater is switched
on.
If your vehicle is not equipped with
steering wheel heater, the button for
the recirculated-air mode is located
here, refer to page23.
530de428
Exterior mirrors
The mirror on the passenger's
side is more curved than the
driver's mirror. Objects reflected in the
mirror are closer than they appear. Do
not attempt to estimate the distance to
following traffic based on the view in
the mirrors, as otherwise an increased
accident risk will result.<

54n
Mirrors1 Adjustments
2 Switching to the other mirror or to the
automatic parking function
*
3 Folding mirrors in and out
*
To store the mirror settings, refer to
Seat, mirror and steering wheel memory
on page50.Adjusting manuallyThe mirrors can also be adjusted manu-
ally by pressing the edges of the mirror
glass.530de256
Folding mirrors in and out Pressing button 3 allows you to fold
mirrors in and out up to a speed of
6 mph/10 km/h. This is advantageous,
for example, in narrow streets or for
bringing mirrors that have been manu-
ally folded-in back into the correct posi-
tion.
Before going through a car wash,
fold the exterior mirrors inward
manually or using button 3; otherwise
they could be damaged, depending on
the width of the car wash system. both exterior mirrors are automatically
heated when the motor is running or the
ignition is switched on.
Interior rearview mirror To reduce glare from vehicles behind
you when you are driving at night, tilt
the mirror by turning the button.530us244

55n
OverviewControlsMaintenanceRepairsDataIndex
Airbags1 Front airbags
2 Head airbags
3 Side airbags for front and rear
*
Protective action
Comply with the instructions on
page43. Failure to do so could
result in diminished personal safety.<
The front airbags supplement the safety
belts by helping to provide additional
protection for the front-seat occupants
in the event of a severe frontal impact in
which the protection afforded by the
safety belts alone may no longer be suf-
ficient. The head airbag and side airbag
help provide protection in the event of a
side impact. The respective side airbag
is designed to help support the body at
530us035
the side of the chest region. The Side
Impact Head Protection System pro-
tects the head.
The airbags are intentionally not trig-
gered in every impact situation, e.g. not
in minor accidents or rear-end colli-
sions.
Stickers on the rear door frame
indicate the status of the rear side
airbags. If the status cannot be clearly
recognized, or if you want to have the
airbags activated/deactivated, please
contact your BMW Sports Activity Vehi-
cle center.<
For information on the correct sitting
position, refer to page43.
Do not apply adhesive materials to
the cover panels of the airbags,
cover them or modify them in any other
way.
Do not attempt to remove the airbag
restraint system from the vehicle. Do
not modify or tamper with either the
wiring or the individual components in
the airbag system. These include the
padded steering wheel hub, the instru-
ment cluster, the side trim panels, the
doors and the roof pillars or the sides of
the headliner. Do not remove or dis-
mantle the steering wheel yourself.
Do not touch the individual components
directly after the system has been trig-
gered, otherwise there is a danger of
burns. If the airbag restraint system
malfunctions, needs to be decommis-
sioned, or has been triggered, only
entrust the necessary repair work to a
BMW Sports Activity Vehicle center or a
workshop that works according to
BMW repair procedures with corre-
spondingly trained personnel and has
the required explosives permits for test-
ing, repair, dismantling or scrapping of
the airbag generators. Unprofessional
attempts to service the system could
lead to failure in an emergency or
undesired airbag activation, either of
which could result in personal injury.<
Warnings and information on the air-
bags is also provided on the sun visors.

56n
AirbagsAutomatically deactivating front
passenger airbagsThe occupation of the seat is detected
by evaluating the imprint on the occu-
pied seat surface of the front passenger
seat. The front and side airbag on the
front passenger side are activated or
deactivated accordingly by the system.
The current status of the front
passenger airbag, i.e. deactivated
or activated, is indicated by the indica-
tor lamp over the interior rearview mir-
ror, refer to Status of front passenger
airbags in the following.<
Before transporting a child on the
front passenger seat, observe the
safety information and handling instruc-
tions under Transporting children
safely, refer to page57.
The front and side airbag on the front
passenger side can be deactivated for
teenagers and adults in certain seat
positions; then the indicator lamp for
the front passenger airbags lights up. In
these cases, change the seat position
so that the front passenger airbags are
activated and the indicator lamp goes
out. If the desired status cannot be pro-
duced by changing the seat position,
transport the corresponding person on
the rear seat. Do not install protective
covers, seat cushions, ball mats or
other objects on the front passenger
seat which are not specially recom-
mended by BMW. Do not lay objects
under the seat which could press
against the seat from below. Otherwise
a correct evaluation of the occupied
seat surface cannot be ensured.<
Status of front passenger airbagOne of the illustrated indicator lamps is
located above the interior rearview mir-
ror.
The indicator lamp for the front passen-
ger airbags indicates the operating sta-
tus of the front and side airbag on the
front passenger side depending on the
seat occupation. The indicator lamp
shows whether the front passenger air-
bags are activated or deactivated.
>The indicator lamp lights up when a
child in a child restraint system
intended for the purpose is properly
detected on the seat.
The front and side airbag on the front
passenger side are not activated530ue260

57n
OverviewControlsMaintenanceRepairsDataIndex
Airbags Transporting children safely >The indicator lamp does not light up
when, for example, a correctly seated
person of sufficient height is detected
on the seat. The front and side airbag
on the front passenger side are acti-
vated
>The indicator lamp does not light up
when the seat is empty.
The front and side airbag on the front
passenger side are not activated.Operational readiness of airbag
system
As of ignition key position 1, the
warning lamp in the instrument
cluster lights up for a short time,
thus indicating the operational readi-
ness of the entire airbag system and the
safety belt tensioners.
Airbag system malfunction:
>Warning lamp does not light up as of
ignition key position 1
>Warning lamp lights up continuously.
Have the airbag system checked
immediately if a malfunction
occurs, as otherwise there is a danger
of the system failing to respond in the
expected manner in an accident of cor-
responding severity.<
The right place for children
Do not leave children unattended
in the vehicle, as otherwise they
could endanger themselves and other
persons, e.g. by opening the doors.<
In principle, all seats in your BMW
except the driver's seat are suitable for
mounting universal child restraint sys-
tems for all ages which are approved
for the respective age group.
Children always in the rear:
Accident research shows that the saf-
est place for children is on the back
seat.
Only transport children under
13 years of age or less than 5 ft/
150 cm tall in the rear in child restraint
systems intended for the respective
age, weight and height of the child.
Otherwise there is an increased danger
of injury in an accident.<
Children 13 years of age or older must
wear a safety belt as soon as a suitable
child restraint system can no longer be
used due to their age, size and weight.
All rear seat positions in your vehicle
comply with the recommendations of
the standard SAE J1819 for the safe
securing of child restraint systems in
motor vehicles.
Exception for front passenger seat:
Should it be necessary to use a
child-restraint system on the front
passenger seat, the front and side air-
bags must be deactivated. Otherwise,
there is an increased risk of injury for
the child when the airbags are trig-
gered, even with a child-restraint sys-
tem. Your BMW Sports Activity Vehicle
center will be happy to advise you.<
More information on automatic deacti-
vation of the front passenger airbags,
refer to page56.

58n
Transporting children safelyInstalling child-restraint systems
Follow the child-restraint system
manufacturer's instructions when
selecting, installing and using child-
restraint systems. Otherwise the degree
of protection can be reduced.<
Commercially available child restraint
systems are designed for securing with
a lap belt or with the lap belt section
of a three-point belt. Incorrectly or
improperly installed child restraint sys-
tems can increase the risk of injury for
children. Always follow the instructions
for installing the system exactly.
On front passenger seat:
Before mounting a child restraint
system on the front passenger
seat, make sure that the front and side
airbag on the front passenger side are
deactivated, as otherwise there is an
increased risk of injury if the airbags are
triggered.<
Before mounting a universal child-
restraint system, move the front pas-
senger seat into the highest position to
achieve the best possible belt routing.
Do not change this seat height.
Child-restraint system securityAll rear safety belts and the safety belt
for the front passenger can be locked to
prevent them from being pulled out,
enabling them to be used for securing
child restraint systems.
Locking safety belt:
1. Secure child restraint system with
the belt
2. Pull out belt webbing completely
3. Allow belt webbing to be pulled in
and pull taut against child restraint
system. The safety belt is locked.
Unlocking safety belt:
1. Open belt buckle
2. Remove child restraint system
3. Allow belt webbing to be pulled in
completely530us104
Child restraint system with tether
strapThere are three additional mounting
points for child restraint systems with a
tether strap, refer to arrows.530us037

59n
OverviewControlsMaintenanceRepairsDataIndex
Transporting children safelyThe illustration shows the fastening of
the tether strap for the outer seats.530ue257
The illustration shows the fastening of
the tether strap for the middle seat.
Routing of the tether strap:
1. Push head restraint upward
2. Guide securing strap through head
restraint bracket
3. Slide the head restraint into the bot-
tom position.
When using the cargo area roll-up
cover, also route the tether strap
between the rear backrest and the cas-
ing of the roll-up cover.530ue256
LATCH child-restraint fixing
systemLATCH: Lower Anchor and Tethers for
CHildren.
To attach a LATCH child's seat,
follow the operating and safety
instructions of the system manufac-
turer.<
The rear outer seating positions are
provided with anchors for a LATCH
child-restraint fixing system.
The illustration shows the left rear seat
as an example. The mounts for attach-
ment of the LATCH child-restraint fixing
system are located behind the cover
panels. 530us255

60n
Transporting children safelyRemove cover panels by pulling them
toward the front.
To remount, simply slide into place.On trips
If the rear is equipped with side
airbags, make sure that children
do not lean out of the child's seat
towards the door panels. Otherwise
severe injuries can be caused if the side
airbags are triggered.<
Child-safety locks of rear doors:
Slide down the safety lever on the rear
doors:
The door can now be opened from the
outside only.
Safety switch for power windows:
Always press the safety switch for the
power windows, refer to page40, when
children are riding in the rear of the
vehicle.530de226