light BUICK LACROSSE 2005 Get To Know Guide
[x] Cancel search | Manufacturer: BUICK, Model Year: 2005, Model line: LACROSSE, Model: BUICK LACROSSE 2005Pages: 20, PDF Size: 1.4 MB
Page 3 of 20
3
See Section 3 of your Owner Manual.
B
C
E
F
G
H
J
K
L
W
V
D
NM
P
Y
O
A
Q
R
T
U
X
S
I
Instrument Panel ClusterYour vehicle’s instrument
panel is equipped with thiscluster or one very similar to it. The instrument panel
cluster includes these key
gauges and lights/lamps.
A.Trunk Ajar
B.Door Ajar
C.Antilock Brake System
(ABS)
D.Cruise Engaged
E.TachometerF.Security
G.Seat Belt – Driver
H.Driver Air Bag
I.Service Vehicle Soon
J.Speedometer
K.Headlamp Suggested
L.Fuel Gauge
M.Washer Fluid Level
N.Battery
O.Temperature Gauge
P.KilometersperHour(KMH)Q.Miles per Hour (MPH)
R.High Beam
S.Reduced Engine Power
T.Service Traction Control
U.Check Gas Cap
V.Oil Level/ChangeOilSoon
W.Service Engine Soon
X.Oil Pressure
Y.Brake
IMPORTANT:
Theinstrument
panel cluster is designed tolet you know about manyimportant aspects of yourvehicle’s operation. It is
important to read your OwnerManual and become familiarwith the information beingrelayed to you by the lights,gauges, DIC messages andindicators, as well as whataction can be taken to ensuresafety and to prevent damage.
Page 5 of 20
5
5. Press the button to change the
setting of each feature.
Your ignition key identifies you to the
vehicle.Two keys can be programmed
for certain features that correspond to
each driver. To personalize a key:
1. From the Personal Program menu,
press the (Option) button until“PERSONALIZE KEY” is displayed.
2. Press the (Set/Reset) button until
“YES” is displayed.
3. Press the button.
Personalization Features include:
•
Delayed Locking— Delays locking
of the vehicle doors for up to five seconds after the last door is closed.
Two chimes will sound when thepower door lock switch or the Lockbutton on the Remote Keyless Entrytransmitter is pressed when a door is
open. To program:
1. From the Personal Program menu,
press the (Option) button until
“DELAYED LOCKING” is displayed.
2. Press the (Set/Reset) button until
“ON” or “OFF” appears.
3. Press the button to select it. The ignition key must be removed for
the feature to work after programming.
•
Key Fob Feedback— Choose from
Off (no feedback), Lights (exteriorlights flash) or Lights and Horn whenyou press the Remote Keyless Entry
transmitter (key fob) Lock button. Toprogram:
1. From the Personal Program menu,
press the (Option) button until“FOB LOCK FEEDBACK” is displayed.
2.Press the (Set/Reset) button until
the desired setting is displayed.3. Press the button to save the
setting.
•
Exterior Light Delay— Sets the
time for exterior lights to remain onafter the key is removed from theignition or the vehicle is unlocked with
the Remote Keyless Entry transmitter.
To program:
1. From the Personal Program menu,
press the (Option) button until
“EXT LIGHT DELAY” is displayed.
2. Press the (Set/Reset) button to
scroll through OFF or 15/30/60/90 second delays.
3.Press the button to store a setting.
You can also use the (Option) and
(Set/Reset) buttons to personalize
each of the following:
• Return settings to factory
default/reset all keys
• Interior lights on when key is
removed from the ignition
• Content theft deterrent system on/off
• Remote start on/off
• Personalize/replace key
Exiting Programming Mode:The DIC
exits programming mode when:
• The vehicle is shifted out of Park.
• The vehicle is no longer in Run.
• You reach the end of the personal
program menu.
See Section 3 of your Owner Manual.
Page 6 of 20
Getting to Know YourLaCrosse6
Remote Vehicle Start
(if equipped)
Use the Remote Keyless Entry transmit
ter (key fob) to start the engine from out side the vehicle. (See the DriverInformation Center personalization menu
section to enable.) Automatic ClimateControl system vehicles will regulate theinside temperature.
To remote start the vehicle:1.Press and release the key fob Lock
button.
2. Press and hold the (Remote Start)
button until the turn signal lights flash.If the lights are not visible, hold theRemote Start button for four secondsand release.
The engine runs for 10 minutes. Extend
run time for 10 minutes from present by
pressing the Lock and Remote Start but tons again. Pressing only the Remote
Start button again will turn off the igni tion. Maximum run time is 20 minutes.
See Section 2 of your Owner Manual.
Unlocking the Doors with the Key
Your vehicle’s passenger doors can be
unlocked using the driver’s door key.
With the key in the lock cylinder:
• Turn the key toward the front of the
vehicle to unlock the driver’s door.
• Turn and hold the key toward the
front of the vehicle for two seconds tounlock all doors.
• Turn and hold the key toward the rear
of the vehicle momentarily to lock alldoors.
See Section 2 of your Owner Manual.
Headlamp Controls and
Automatic Headlamp System
You will find the exterior lamps knob on
the left side of the instrument panel.
AUTO:Activates the automatic head
lamp system, illuminating all exteriorlamps and the instrument panel/radiolights when needed.
(On/Off):If the switch is in the AUTO
position but lights are off, turn them onby turning the switch to (On/Off) and
release. To turn the headlamps off whenthe lights are on, turn the control to the
position. The momentary switch
design springs back to AUTO whenreleased.
(Parking Lamps):The parking lamp
position illuminates tail/side
marker/license plate lamps and instru ment panel/radio lights.
Page 7 of 20
7
(Headlamps):The headlamps posi
tion manually activates the headlamps,
exterior tail/marker lamps and instru ment panel/radio lights.
(Fog Lamps):To activate the fog
lamps, press the center of the rotary
control marked .
To switch headlamps from low to high
beam, push the multifunction lever awayfrom you. Pull it back and release forlow beam operation.
See Section 3 of your Owner Manual.
Daytime Running Lamps (DRL)
DRL illuminates the low beam head
lamps at a lower intensity in daylight to
make the front of the vehicle more visi
ble to others. The DRL illuminates onlythe low beam headlamps, not the taillamps or side marker lamps.
See Section 3 of your Owner Manual.
Interior Lamps
The interior lamps control is located next to
the exterior lamps control on the left sideof the instrument panel. It can be set to:
(Off):This position disables the interi
or lamps entirely, whether or not a door
is open.
(Door):This position turns on the
interior lamps when a door is openedand when the ignition key is removed.
(On):This position turns on the inte
rior lamps continuously.
Instrument Panel Brightness:When
you push the center of the interior lampsknob, a spring loaded stem will pop out.
Turn it right or left to adjust intensity.
Reading Lamps:Press the reading light
lens to turn on/off.
See Section 3 of your Owner Manual.
Tilt/Telescoping Steering Wheel
To adjust the tilt position of the steering
wheel, hold the wheel and pull the lever
(see “A”) on the left of the steering col umn toward you. Move the wheel up ordown to a comfortable level. Releasethe lever to lock.
To adjust the telescoping position of the
steering wheel, push down on the lever(see “B”) to unlock the steering wheel.Pull or push the steering wheel to thedesired position. Push up on the lever tolock the steering wheel.
Do not adjust the position of the steering
wheel while driving.
See Section 3 of your Owner Manual.
A
B
Page 9 of 20
9
(Decrease fan speed):Press to
lower fan speed.
(Increase fan speed):Press to
raise fan speed.
(Air Conditioning):Press to activate
or deactivate air conditioning.
(Recirculation):Press to prevent
outside air from entering your vehicle.
Recirculation can be activated in Vent or
Bi Level mode, but not in Floor/Defog or
Defrost mode.
(Rear Window Defog):Press to
clear the rear glass (it turns off afterabout 20 minutes). Press again forextended operation. Press again or
switch off the ignition to turn off.
(Floor mode):Press to direct most
of the air to the floor.
(Bi Level mode):Press to direct
most of the air to the instrument paneland floor outlets.
(Vent mode):Press to direct air
through the instrument panel outlets.
(Floor/Defog):Press to clear the
windshield and front side windows ofmist and frost.
(Defrost):Press to clear the wind
shield of heavier amounts of mist and
frost more quickly.
(Heated Seats):Press to turn the
driver or passenger heated seat on/off.
See Section 3 of your Owner Manual.
(Mist):For a single wipe, twist the
band on the multifunction stalk down tothis position and release.
(Off):Twist the band to this position
to turn off the wipers.
(Delay):Twist the band up to set the
delay time (the top of the band equals ashorter delay).
(Low):Twist the band up to this
position for low speed wipers.
(High):Twist the band up to this
position for high speed wipers.
(Washer):To spray washer fluid,
turn the paddle at the top of the multi function lever forward and release.There will be a slight delay before the
wipers are activated. This is normal andallows the washer to clean the entirewindshield.
See Section 3 of your Owner Manual.
Windshield Wipers/Washers
Page 12 of 20
Getting to Know YourLaCrosse12
MP3 Capable Uplevel Radio
(if equipped)
Play MP3 files on CD R CDs of up to
700 MB capacity. To play, with the igni tion on, insert the disc partway into the
slot, label side up. The player will pull itin. “READING” appears on the display
and the disc plays. Smaller, 3 inch
(8 cm) single CDs may be used with
an adapter ring.
3 (Repeat):Press to hear a track
over again. RPT is displayed. Press
again to disable repeat play.
5 (Previous Folder):Press to go to
the first track in the previous folder.Pressing while in the Folder Randommode takes you to the previous folderand plays random tracks there.
6(Next Folder):Press to go to the
first track in the next folder. Pressingwhile in Folder Random mode takes youto the next folder and plays randomtracks there.
Six Disc CD Player (if equipped)
To load multiple CDs in the six disc
CD player:
1.Turn the ignition on. Press and hold
the Load button for two seconds. The
player beeps and the light to the right
of the slot will flash. “MULTI LOAD #”is displayed.
2.When the light stops flashing and
turns green, “INSERT CD #” is
displayed. Insert a disc partway, label side up.
3. Indicator light will begin blinking and
turn green. Another disc may beloaded.
4. When loading two to five CDs, press
the Load button again after loadingthe final CD.
For every CD loaded, a number appears
on the radio display. To play a specific
disc, press CD and the number of the
CD you want to hear. A small barappears under the CD number that isplaying, and the track number appears.
Finding a Category Station
(if equipped)
Category (CAT) stations are available on
XM1 or XM2 bands only. To find a CAT
station:
1. Press the CAT button to activate
Program Type (PTY) Select mode.
2. A category is displayed.3.Rotate the Tune knob. When the
preferred category appears, press theSeek button to go to the first categorystation (Pressing Seek for more thantwo seconds will activate CategoryScan).
4. To go to another station, press the
CAT button. The previously storedcategory will be displayed.
5. Press the up or down Seek button.
6. Press the CAT button to exit Program
Type Select mode.
Steering Wheel Controls (if equipped)
See Radio and CDControls for full details
about the functions of the following buttons:
•
(Seek)
•BAND
•1 6 (Preset Stations)
•(OnStar®/Mute):Press to silence
audio, and again to play. In OnStar equipped vehicles, press to interactwith the OnStar system.
•
(VOLUME):Press up/down
arrow to increase/decrease volume.
See Section 3 of your Owner Manual.
Page 13 of 20
13
HomeLink®Wireless Control
System
The HomeLink system can store three
frequencies for a garage door opener,entry door lock, security system, etc.
To program, with the engine Off:
• Press and hold the two outer buttons
on the HomeLink until the indicatorlight flashes;
then release the buttons(about 20 seconds — do not hold for
more than 30 seconds); do not repeatthis step for the second or thirddevices added.
• Hold the end of your hand held trans
mitter up to three inches away fromthe surface of the HomeLink. Hold itsbutton and the button you wish toassign it to on the HomeLink system.
• Continue holding both buttons (up to
90 seconds); the indicator light will
begin blinking slowly, then more quick
ly. Programming is complete whenthe HomeLink light flashes rapidly.
• Release both buttons.
• Press and hold the HomeLink button
again. If the indicator stays lit con
stantly, programming is complete.
• Continue programming additional
devices using the remaining two
HomeLink buttons, but do not simul taneously press the two outer buttonson the HomeLink again.
If the HomeLink indicator blinks rapidly
for two seconds and remains on duringprogramming, it indicates that yourdevice (usually a garage door opener)has a “rolling code.”
See Section 2 of your Owner Manual.
Accessory Power Outlets
Your vehicle is equipped with 12 volt
outlets. One is located on the center
console below the climate controls. The
second outlet is located inside the cen ter storage console. On 6 passengermodels, the second outlet is located inthe flip/fold console. Use them to powercellular phones, CB radio, etc. See your
Owner Manual for full safety and war ranty cautions.
See Section 3 of your Owner Manual.
Page 15 of 20
15
Use the deck lid tie down to secure the
deck lid when carrying oversize cargothat prevents the deck lid from closing
completely. Observe all applicable safetyprecautions.
See Section 2 of your Owner Manual.
Load Floor (Spare Tire Cover)
For convenient access to the spare tire,
lift and attach the load floor (tire cover)handle to the front of the deck lid weatherstrip.
See Section 5 of your Owner Manual.
Sun Visors
Swing down the visors and slide them
along the rod to cover different areas of
the front window, or move them to coverthe side windows.
See Section 2 of your Owner Manual.
Cupholders
On five passenger models, the center
console has a cupholder in its front sec
tion. A two position arm adjusts to hold
the cup securely.
On six passenger models, a cupholder
is located inside the armrest/center stor age console. Turn the bottom of the
armrest/console outward to access the
cupholder.
The rear seat armrest also has a
cupholder.
See Section 2 of your Owner Manual.
OnStar®and Owner Manual Shelf
The OnStar system and Owner Manual
shelf are located at the top of the glove box.
See Section 2 of your Owner Manual.
Bag Holder
A hook on the glove box door is
designed to hold the handle of a smallplastic bag, which may be used to holdtrash or small, lightweight items. Closethe glove box door after placing the bagon the hook.
Hanging Garments
Use the rear assist handle to secure
clothing on hangers for transport.
Page 16 of 20
Getting to Know YourLaCrosse16
Opening the Vehicle Hood
Pull the hood release handle located
under the driver’s side of the instrumentpanel.
Under the leading edge of the hood
itself, push the secondary hood releasehandle up and to the right. Lift the hood.
See Section 5 of your Owner Manual.
Passenger Air Bag
Status Indicator
Your vehicle’s passenger sensing air
bag system has a status indicator locat ed in the instrument panel center stack.
With the key in Run or Start, the indica
tor blinks on/off for several seconds as asystem check. Following, the light will
stay on or off to indicate passenger sideair bag status. If it shows that the airbag is on, it means that the air bag isenabled (could inflate). If it shows that
the air bag is off, the passenger air bagis disabled. If all lights remain on or off
after several seconds, see your dealer ship for service.
IMPORTANT: See your
Owner Manual for full safety informationand cautions.
See Sections 1 and 3 of your Owner Manual.
Passenger Compartment
Air Filter
The filter is located in the engine com
partment below the air inlet grille, nearthe passenger side wiper arm. It trapsmost of the pollen from the air thatenters the air conditioning module. See your Owner Manual for ScheduledMaintenance and replacement instructions.
See Section 3 of your Owner Manual.
Ultrasonic Rear Parking Assist
(if equipped)
Ultrasonic Rear Parking Assist (URPA)
detects objects up to 5 feet (1.5 m)behind the vehicle when the shift lever is in the Reverse position and vehiclespeed is less than 3 mph (5 km/h).Three color coded lights inside the vehicle, above the rear window, provide
distance and system information to the
driver. See your Owner Manual for fulloperation details.
See Section 3 of your Owner Manual.
Antilock Brake System
(if equipped)
The Antilock Brake System (ABS) helps
to prevent a braking skid. The ABSwarning light illuminates briefly when theengine is started. Momentary motor orclicking noises and slight brake pedalmovement is normal as the systemchecks itself at startup.
See Section 4 of your Owner Manual.
Page 17 of 20
17
Traction Control System (TCS)
(if equipped)
The Traction Control System (TCS)
limits wheelspin. TCS activates when it
senses one or both front wheels spin
ning or losing traction. Then the systemreduces engine power and may upshift
the transaxle to limit wheelspin. It is nor mal to hear or feel the system working.
TCS is always enabled unless you dis able it manually to rock the vehicle free
from sand, mud or snow.
To disable TCS, press the TCS button
on the instrument panel. The TCS warn ing light will come on. Press the button
again to turn on TCS.
See Section 4 of your Owner Manual.
StabiliTrak®System
(if equipped)
StabiliTrak is a computer controlled sys
tem that detects and corrects differencesbetween the path you have chosen and
the vehicle’s actual direction by applying
brake pressure individually at the appro
priate wheel. When the system acti
vates, “STABILITY CONTROL ACTIVE”displays on the DIC.
See Section 4 of your Owner Manual.
Acoustic Laminate Glass
Special windshield and front door win
dow glass composition reduces windand road noise. If replacement is neces
sary, see your dealer or specify
acoustic
laminateglass from the supplier. Failure
to do so can result in added wind andoutside noise in the cabin.
Vehicle Symbols Glossary
Following are examples of symbols you
may find on your vehicle. It is importantto become familiar with them, as theyindicate vehicle features and alert you to various vehicle operating conditions.
Air Bag Readiness LightAir Conditioning (A/C)Air RecirculationAntilock Brake System
Warning Light
Brake System Warning LightCruise Control On/Off
DIC FuelDIC GaugesDIC Option DIC Set/Reset Fog LampsHeadlamps
Malfunction Indicator Lamp
(Check Engine Light)
Off
Off/OnOnParking LampsRear Window Defogger
Remote Vehicle StartSafety Belt Reminder LightSecurity Light
Traction Control Off Light