start stop button BUICK LACROSSE 2005 Get To Know Guide

11
To set Balance/Fade, push and release
until “BAL” appears to adjust Balance.
Turn the knob to move the sound toward
the right or left. Push until “FAD” appears
to adjust Fade. Turn the knob to move
the sound toward the front or rear.
To adjust all controls to the middle posi
tion, push/hold the speaker knob whenno tone or speaker control is displayed.
“ALL CEN” appears and the unit beeps.
(Seek):Press and release the
left/right Seek arrow to go to the previ
ous or next station and stay there.
To scan, press and hold either arrow for
more than two seconds. “SCAN”appears on the display and a beep
sounds. The radio finds a station, playsa few seconds and advances to thenext. Press either arrow or a pushbuttonto stop scanning.
To scan preset stations, press and hold
either arrow for more than four seconds.“PSCAN” appears and two beeps
sound. Press either arrow or a pushbutton to stop scanning presets.
Setting Preset Stations:
1. With the radio on, press BAND to
select AM/FM1/FM2 or XM1/XM2 (if equipped).
2. Tune to the desired station.
3. Press EQ to select equalization.
4. Press and hold a numbered push
button until a beep sounds.
Repeat for each pushbutton for each
band (up to 30 possible stations).
DISP (Display):With the ignition off,
press to display the time.
CD Controls
With the ignition on, insert a CD, label
side up, partway into the slot. The player
will pull it in and begin playing. To insert
with ignition off, first press eject or DISP.
1 (Reverse):Press to go to the start
of the current track if more than eightseconds have played. Hold or pressmore than once to progress backwardthrough the CD tracks.
2 (Fast Forward):Press to go to
the next track. Hold or press more thanonce to forward through the upcoming CDtracks.
4RDM (Random):Press to hear tracks
in random order. Press again to disable
random play.
(Seek):Press the left arrow to go
to the start of the current track or theprevious track. Press the right arrow togo to the start of the next track. Pressthe arrows for more than two seconds tosearch previous or next tracks. Releaseto stop searching and play the track.
DISP (Display):Press to display the
current CD track and the elapsed timethe current track has played.
BAND:Press to switch to the radio
when a CD is playing. The CD remainsinside the player.
(CD):Press to play a CD when the
radio is playing.
EQ (if equipped):Press to select cus
tomized equalization settings for C&W,Jazz, Talk, Pop, Rock and Classical
music. To return to manual mode, press
and release the Tone knob until “MANUAL” is displayed.
(Eject):Press to eject a CD, with the
ignition off or on, or the radio off. Load
CDs with the ignition off by pressing thisbutton first.