washer fluid BUICK LACROSSE 2009 Get To Know Guide
[x] Cancel search | Manufacturer: BUICK, Model Year: 2009, Model line: LACROSSE, Model: BUICK LACROSSE 2009Pages: 20, PDF Size: 0.81 MB
Page 3 of 20

3
BDFGHIKLM
UT
E
O
NA
RSVQ
J
Your vehicle’s instrument panel is
equipped with this cluster or one very
similar to it. The instrument panel cluster
includes these key gauges and
lights/lamps:
A. Trunk Ajar
B. Door Ajar
C. Tire Pressure Monitor
D. Antilock Brake System (ABS)
E. Cruise Control Engaged
F. Tachometer
G. Security
H. Safety Belt – Driver
I. Driver Airbag
J. Service Vehicle Soon
K. Speedometer
L. Headlamp SuggestedM. Fuel Gauge
N. Washer Fluid Level
O. Battery
P. Temperature Gauge
Q. Reduced Engine Power
R. Traction Control Disabled
S. Check Gas Cap
T. Change Engine Oil
U. Check Engine
V. Oil Pressure
Note: The instrument panel cluster is designed to let
you know about many important aspects of your vehi-
cle’s operation. It is important to read your Owner
Manual and become familiar with the information
being relayed to you by the lights, gauges, DIC mes-
sages and indicators, as well as what action can be
taken to ensure safety and to prevent damage.
C
Instrument Panel Cluster
See Section 3 of your Owner Manual.
P
Page 14 of 20

The cruise control buttons, located on
the steering wheel, include the following
functions:
(On/Off): Press this button to turn
the cruise control system on or off.
– SET (Set): Press this button to set
a speed, or to decrease the set speed
when the system is active. When the
cruise control is set, the cruise light
will illuminate on the instrument panel
cluster.
+ RES (Resume/Accelerate): Press
this button to resume a set speed, or to
increase the set
speed when the
system is active.
(Cancel):
Press this button
to cancel the set
speed. The set
speed will remain
in memory.
Applying the
brakes will also
cancel the set
speed.
See Section 3 of your
Owner Manual.
Getting to Know Your LaCrosse14
Cruise Control
The windshield wipers/washer controls
are located on the multifunction lever on
the left side of the steering wheel.
(Mist):For a single wipe, twist the
band on the multifunction stalk down to
this position and release.
(Off):Twist the band to this position
to turn off the wipers.
(Delay):Twist the band up to set the
delay time (the top of the band equals a
shorter delay).
(Low):Twist the band up to this
position for low-speed wipers.
(High):Twist the band up to this
position for high-speed wipers.
(Washer):To spray washer fluid,
turn the paddle at the top of the multi-
function lever forward and release.
There will be a slight delay before the
wipers are activated. This is normal and
allows the washer to clean the entire
windshield.
See Section 3 of your Owner Manual.
Windshield Wipers/Washer