mirror BUICK LACROSSE 2015 Get To Know Guide

6
Power SeatsF
Power Seat AdjustmentA. Seat Adjustment
Move the front horizontal control to
move the seat forward or rearward, or
to tilt, raise or lower the seat.
B. Seatback Recline Adjustment
Move the vertical control to recline or
raise the seatback.
C. 4-way Lumbar Adjustment
Move the rear control to adjust the
lumbar support.
Head Restraint Adjustment
The head restraints for the driver and front passenger are adjustable. Two different head
restraints are available.
If equipped, raise the head restraint or move it forward by pulling it u\
p or forward. Lower
the head restraint or move it rearward by first pressing the button on the left side of the
head restraint and then pushing the head restraint down or rearward.
If equipped, move the head restraint forward by pulling the front part o\
f it forward. Move
the head restraint rearward by first pulling it forward completely, until it releases, and
then moving it rearward. Raise or lower the head restraint by first pressing the button on
the left side of the head restraint and then moving the head restraint u\
p or down.
Set Memory Positions
1. Adjust the driver’s seat and power outside mirrors to the desired pos\
itions.
2. Press and hold the SET button and button 1 on the driver’s door at the same time until
a beep sounds.
3. Repeat the steps using button 2 for a second driver.
Recall Positions
At any time, press and hold button 1 or 2 or the Exit button on the driver’s door
until the stored position is reached. Releasing the button before the stored position is \
reached cancels the recall.
With the vehicle in Park and the ignition on, press and release button 1 or 2 or the Exit button to recall the stored position.
Note: To change the memory recall settings, go to Comfort and Convenience in t\
he Vehicle
Settings menu.
Easy Exit Seat
Automatically move the seat rearward by turning on the Easy Exit feature. See the Vehi\
cle
Settings menu.
See Seats and Restraints in your Owner Manual.
F Optional equipment
ABC

7
Climate Controls
Driver’s
Heated/
Ventilated Seat Controls
F


Power
On/Off A/C
Air
Conditioning Control AUTO Automatic
Operation Recirculation Mode
Automatic Operation
1. Press AUTO.
2. Set the temperature for the driver and front passenger. The system autom\
atically
controls the fan speed, air delivery, air conditioning and recirculation to reach the set
temperature. Allow time for the system to reach the desired temperature.\
If the air delivery mode or fan speed is manually adjusted, automatic operation is
turned off.
Note: When the recirculation mode is used without air conditioning, the air humidity increases and the
windows may fog.
See Climate Controls in your Owner Manual.
F Optional equipment
Front
Passenger’s Heated/
Ventilated Seat Controls
F
SYNCF Link passenger’s temperature
setting to driver’s
temperature setting
Driver’s
Temperature Control
Air Delivery
Mode Controls Defrost Mode Passenger’s
Temperature Control Fan Speed Control/Off
Rear Window/
Outside Mirror Defogger

17
Driver Assistance Systems
The driver assistance systems use advanced technologies to help avoid collisions by
providing visual and audible alerts under some imminent collision conditions.
Forward Collision Alert
F – When approaching a vehicle directly ahead too quickly, the
system flashes a visual alert and pulses the Safety Alert SeatF. See Safety Alert Seat.
To set the alert timing to Far, Medium, or Near, press the Collision Alert button
or the Follow Distance Gap button on the left side of the steering wheel.
Lane Departure Warning
F – When crossing a detected lane marking without using a turn
signal, the system flashes a visual alert and pulses the left or right side of the Safety Alert
Seat♦. See Safety Alert Seat.
To turn the system on or off, press the Lane Departure Warning button on the
center of the instrument panel.
Side Blind Zone Alert/Lane Change Alert
F – While driving, the Side Blind Zone Alert/
Lane Change Alert displays a
warning symbol on the left or right side mirror when a
vehicle is detected in that side blind zone area or rapidly approaching that sid\
e blind zone
area. The warning symbol flashes if a turn signal is activated when a vehicle has been
detected.
To turn the system on or off, go to Collision/Detection Systems > Side Blind Zone Alert
in the Vehicle Settings menu.
Rear Parking Assist
F – During low-speed parking maneuvers, the Rear Parking Assist
system displays a caution symbol on the Rear Vision Camera when an object is detected.
One beep sounds or the Safety Alert Seat pulses when an object is first detected and five
beeps sound or the Safety Alert Seat pulses when an object is very close\
.
To turn the system on or off, press the Parking Assist button on the center of the
instrument panel.
Safety Alert Seat
F – Subtle driver’s seat pulses, left or right, or simultaneously, \
alert the
driver of potential hazards.
Note: Audible notification may be selected instead of Safety Alert Seat pulsing notification. To change
the alert setting, go to the Collision and Detection menu in the Vehicle\
Settings.
See Driving and Operating in your Owner Manual.
F Optional equipment