window BUICK LACROSSE 2015 Get To Know Guide

4
Remote Keyless Entry Transmitter (Key Fob)
F Optional equipment
Unlock
Press to unlock the driver’s door.
Press again to unlock all doors.
Lock
Press to lock all doors. The
driver’s door will not lock
when open if the Unlocked
Door Anti Lock Out feature
is turned on. See the Vehicle
Settings menu.
Vehicle Locator/
Panic Alarm
Press and release to locate
your vehicle. The turn signal
lamps will flash and the horn
will sound.
Press and hold to activate the
alarm. The turn signal lamps will flash
and the horn will sound until the button is
pressed again or the ignition is turned on.
Trunk Release
Press and hold to unlock the trunk.
Adaptive Remote Vehicle StartF
Press and release the Lock button and
then press and hold the button until the
turn signal lamps flash to start the engine
from outside the vehicle. After entering the vehicle, turn on the ignition using the key or ENGINE STOP/START
button
F.
• During a remote start, the
engine will run for 10 minutes.
• Press and hold the
button
until the parking lamps turn off
to cancel a remote start.
Note: To change the remote lock,
unlock, and remote start settings, go to Remote Lock, Unlock, Start in the
Vehicle Settings menu.
If the remote start heated seat option is
selected, the heated seat button indicators
will not illuminate and the temperature of the
unoccupied heated seat may be reduced during
the remote start. The heated seat turns off
when the ignition is turned on.
See Keys, Doors and Windows in your Owner Manual.
Door Locks/Trunk Release
Door Locks
To lock or unlock all doors, press the power door Lock/ Unlock button, located on
the interior panels of the front doors.
Note: To change the lock and unlock setting, go to Power Door Locks in the Veh\
icle Settings menu.
To open a locked door from inside, pull the inside door handle to unlock\
the door and
then pull the door handle again to open the door.
Trunk Release
To open the trunk, with the vehicle unlocked, press the Trunk Release button on
the driver’s door, press the touchpadF above the license plate or use the Trunk
Release button on the key fob.
See Keys, Doors and Windows in your Owner Manual.

5
Keyless Access SystemF
The Keyless Access System enables operation of the doors and ignition wi\
thout removing
the key fob from a pocket or purse. The key fob must be within three fee\
t of the door being
unlocked or the trunk.
Keyless Unlocking
With the key fob within range:
Press the lock button on the driver’s door
handle to unlock the driver’s door; press
it again within five seconds to unlock
all doors.
Press the lock button on a passenger
door handle to unlock all doors.
Press the touchpad above the license
plate to open the trunk.
Keyless Locking
With the ignition off, the key fob out of the vehicle, and all doors closed:
Press the lock button on any door handle to lock all doors immediately.
If Passive Locking is turned on, all doors will lock automatically after a short delay once
all doors are closed.
Note: To change the door lock and unlock settings, go to Remote Lock, Unlock, \
Start in the Vehicle
Settings menu.
See Keys, Doors and Windows in your Owner Manual.
Keyless Access StartF
Starting the Engine
With the vehicle in Park or Neutral, press
the brake pedal and then press and hold
the ENGINE START/STOP button to start
the engine.
Note: The key fob must be in the vehicle to turn on
the ignition. If the key fob battery is weak, place the
key fob in the pocket in the center console storage
compartment to enable the engine to start. Replace
the key fob battery as soon as possible.
Stopping the Engine
Shift to Park and press the ENGINE START/STOP button to turn off the engine.
Accessory
With the engine off and the brake pedal not applied, press the ENGINE START/STOP
button to place the ignition system in the accessory position.
See Driving and Operating in your Owner Manual.
F Optional equipment

7
Climate Controls
Driver’s
Heated/
Ventilated Seat Controls
F


Power
On/Off A/C
Air
Conditioning Control AUTO Automatic
Operation Recirculation Mode
Automatic Operation
1. Press AUTO.
2. Set the temperature for the driver and front passenger. The system autom\
atically
controls the fan speed, air delivery, air conditioning and recirculation to reach the set
temperature. Allow time for the system to reach the desired temperature.\
If the air delivery mode or fan speed is manually adjusted, automatic operation is
turned off.
Note: When the recirculation mode is used without air conditioning, the air humidity increases and the
windows may fog.
See Climate Controls in your Owner Manual.
F Optional equipment
Front
Passenger’s Heated/
Ventilated Seat Controls
F
SYNCF Link passenger’s temperature
setting to driver’s
temperature setting
Driver’s
Temperature Control
Air Delivery
Mode Controls Defrost Mode Passenger’s
Temperature Control Fan Speed Control/Off
Rear Window/
Outside Mirror Defogger