instrument cluster BUICK REGAL 2012 Get To Know Guide
[x] Cancel search | Manufacturer: BUICK, Model Year: 2012, Model line: REGAL, Model: BUICK REGAL 2012Pages: 16, PDF Size: 2.18 MB
Page 2 of 16

2
Exterior Lamps
ControlTurn Signal Lever/
Driver Information
Center ControlsInstrument
Cluster
Tilt/Telescopic
Steering Wheel
Lever Hood Release
LeverWindshield
Wipers Lever
Cruise Control
Buttons Storage/Fuse
Panel Access
Instrument Panel
Oil Pressure
Airbag Readiness
StabiliTrak/Traction
Control Warning
Security
Charging SystemSafety Belt Reminder
Brake System
Warning
Parking Brake Set
Lights On
Low Tire Pressure
Antilock Brake
System Warning
PA R K
Check Engine
Traction Control Off
StabiliTrak/Traction
Control Off
Fog Lamps
Cruise Control
Audio Steering
Wheel Controls
Symbols
Page 3 of 16

3
Refer to your Owner Manual to learn about the information being relayed by the lights
and gauges of the instrument cluster, as well as what to do to ensure safety and prevent
damage to your vehicle.
See Instruments and Controls in your Owner Manual.
Traction Control/
StabiliTrak
Button
Electric Parking
Brake Multifunction
Controller✦Audio System/
Navigation
System✦ Hazard
Warning
Flashers
Button
Automatic Climate
Controls/Heated
Seat Buttons Ultrasonic
Rear Parking
Assist ButtonPower
Door Lock
Buttons
Page 12 of 16

12
Driver Information Center
The Driver Information Center (DIC) on the
instrument cluster displays vehicle system
info r mation and warning messages and is
accessed using the controls on the turn
signal lever.
DIC Controls
CBA
Cruise Control
Adjusting Cruise Control
RES/+ Resume/Accelerate
Rotate the switch up to resume a set
speed.
When the system is active, rotate the
switch up to increase speed.
SET/– Set/Coast
When the system is active, rotate the
switch down to decrease speed.
Cancel
Press to cancel the cruise control
but retain the set speed in memory.
Pressing the brake pedal also will cancel
the cruise control.
The cruise control set speed is erased
when cruise control or the vehicle ignition
is turned off.
See Driving and Operating in your Owner Manual.
Setting Cruise Control
1. Press the On/Offbutton. The
Cruise Controlsymbol will illuminate in
white in the instrument cluster.
2. When traveling at the desired speed
(must be above 25 mph), rotate the
SET/–switch down to set the speed.
The Cruise Controlsymbol will
illuminate in green in the instrument
cluster.
A. MENU
Press to display the:
–Trip/Fuel menu(digital speed ometer,
trip odometers, fuel range, average
fuel economy, instantaneous fuel
economy, average speed, timer,
OnStar Turn-by-Turn guidance).
–Vehicle Information menu(units,
tire pressures, remaining oil life,
compass, speed warning).
B.
Rotate the switch to scroll through the
items of each menu.
C. SET/CLR
Press the button on the end of the lever
to set or clear a menu item or warning
message. Some urgent messages
cannot be cleared from the DIC display.
See Instruments and Controls in your Owner Manual.
Page 13 of 16

13
Automatic Transmission
Detected objects are indicated by audible beeps when the vehicle is in Reverse. The
interval between beeps becomes shorter as the vehicle gets closer to an object. When the
distance is less than 12 in. (30 cm), the beeps are continuous. The system operates only
at speeds less than 5 mph.
• To turn the system on/off, press the Parking Assistbutton on the center of the
instrument panel.
Note: THE SYSTEM MAY BE DISABLED IF DIRT, SNOW OR ICE BUILDS UP ON THE
SENSORS. KEEP THE VEHICLE CLEAN FOR PROPER OPERATION.
See Driving and Operating in your Owner Manual.
Electric Parking Brake
• To apply the parking brake, pull up theParking Brakeswitch by the shift lever.
• To release the parking brake, turn on the ignition, press the brake pedal and press the
Parking Brakeswitch.
See Driving and Operating in your Owner Manual.
Ultrasonic Rear Parking Assist✦
The full-time, full-function traction control system limits wheelspin and the StabiliTrak
electronic stability control system assists with directional control of the vehicle in difficult
driving conditions. Both systems turn on automatically every time the vehicle is started.
Turning the Systems Off/On
• To turn off traction control, press the StabiliTrak/Traction Controlbutton on the
center of the instrument panel. The Traction Control Offlight will illuminate in the
instrument cluster.
• To turn off both traction control and StabiliTrak, press and hold the button.
The StabiliTrak Offlight will illuminate in the instrument cluster.
• Press the button again to turn on both systems.
See Driving and Operating in your Owner Manual.
StabiliTrak®/Traction Control Systems
Driver Shift Control
Driver Shift Control (DSC) allows the driver to shift gears manually. This feature can be
used to drive the vehicle in a sportier manner or to downshift when driving on a downhill
grade to provide engine braking.
• Move the shift lever to the left of the Drive (D) position. Tap the shift lever forward (+) to
upshift or rearward to downshift (–). The currently selected gear will be displayed in the
Driver Information Center.
If vehicle speed is too high or too low for the requested gear, the shift will not occur. When
coming to a stop, the transmission will automatically downshift.
See Driving and Operating in your Owner Manual.