hood release BUICK ROADMASTER 1993 Owners Manual

I USAGE
Chassis
Lubrication
Front Wheel Bearings
USAGE
Rear Axle (Standard
Differential)
FLUID/LUBRICANT
Chassis lubricant meeting
requirements of NLGI Grade
2,
Category LB. or GC-LB (GM Part
No. 1052497 or equivalent).
Wheel bearing lubricant meeting
requirements of NLGI Grade
2,
Category GC or GC-LB (GM Part
No. 1051344 or equivalent).
Axle Lubricant
(GM Part No.
1052271) or SAE 8OW-90 %L-5
Gear Lubricant.
Axle Lubricant (GM Part
No.
1052271) or SAE 80W-90 GL-5
Gear Lubricant, and Limited-Slip
DifferentialLubricant Additive (GM
Part
No. 1052358) or equivalent
where required. See “Rear Axle” in
the .Index.
GM Optikleen@ Washer Solvent
(GM Part No. 10515.15) or
equivalent.
FLUIDlLUBRICANT
Rear Axle (Limited-Slip
Differential)
Windshield
Washer Solvent Hood Latch
Assembly
a. Pivots and Spring
Anchor
b. Release Pawl
Hood and Door
Hinges
Fuel Filler Door Hinge, Rear
.Compartment
Lid Hinges,
Wagon Tailgate
Hinge, Rear Folding Seat
~~
Weatherstrips a. Engine oil.
b. Chassis lubricant meeting
requirements
of NLGI Grade 2,
Category LB ‘or GC-LB (GM Part
No.
12346003 or equivalent).
Engine oil or Lubriplate Lubricant
(GM Part No.
1050109).
Engine oil ox: Lubriplate Lubricatn
(GM’Part No.
1050109).
Dielectric Silicone Grease (GM Part
No. 12345579 or equivalent).
See “Specifications Chart” in the Index for
recommended replacement filters, valves and spark
plugs.
315