belt CADILLAC ATS 2017 1.G Personalization Guide

6
INSTRUMENT CLUSTER
Refer to your Owner Manual to learn about the information being relayed
by the lights, gauges and indicators of the instrument cluster.
StabiliTrak Off
Low Tire Pressure
Service Electric Parking Brake
Antilock Brake System Warning

Airbag Readiness
Brake System Warning
High Beam Headlamps
Lane Keep Assist/ Lane Departure Warning

Forward Collision Alert
StabiliTrak/Traction Control
Engaged
Engine Oil Pressure Warning
Security Notification

Lights On Reminder
Charging System Warning

Low Fuel Warning
Engine Coolant Temperature
Safety Belt Reminder
Adaptive Forward Lighting Activated
PARK Electric Parking Brake Set
Check Engine Warning
Traction Control Off

Cruise Control Activated

Adaptive Cruise Control Activated
$ AutoStop
Symbols
See Instruments and Controls in your Owner Manual.

17
Rear Cross Traffic Alert♦ – With the vehicle in Reverse, a warning
of approaching cross traffic is displayed on the touch screen from
the Rear Vision Camera, and the left or right side of the Safety Alert
Seat pulses to indicate the direction of the cross traffic.
To turn the system on or off, press the Park Assist button
on the left side of the instrument panel. This will also turn on/
off the Park Assist and Rear Automatic Braking systems.
Automatic Safety Belt Tightening♦ – While driving, the front
safety belts automatically tighten during initial acceleration and
emergency braking or steering maneuvers, and release when
driving conditions return to normal.
See Driving and Operating in your Owner Manual.
ADAPTIVE REMOTE START ♦
STARTING THE VEHICLE
1.
Press and release the Lock button on the Remote Keyless
Entry transmitter.
2. Immediately press and hold the
Remote Start button until
the turn signal lamps flash.
When the vehicle starts, the parking lamps will light and
remain on while the engine is running. The engine will continue
running for 10 minutes. Repeat these steps for a 10-minute time
extension. Remote start can be extended only once.
3. Before driving, simultaneously press the brake pedal and the
ENGINE START/STOP button to activate vehicle systems.
CANCELING A REMOTE START
Press and hold the Remote Start button until the parking
lamps turn off.
CLIMATE CONTROL OPERATION
During a remote start, the automatic climate control system will operate at the same setting as when the vehicle was last turned off.
HEATED SEAT OPERATION
If the remote start heated seat option is selected in the Vehicle
Settings, the heated seat button indicators do not illuminate and
the temperature performance of the unoccupied heated seat may
be reduced during the remote start. The heated seat turns off when
the ignition is turned on.
See Keys, Doors and Windows in your Owner Manual.
AUTO HEATED SEATS ♦
When the vehicle is on, the auto heated seats will be activated at the
level required by the vehicle's interior temperature. The heated seat
level is shown on the heated seat control indicators. Turn off the
heated seats using the heated seat controls.

To turn the auto heated seats feature on or off, go to Settings >
Vehicle > Climate and Air Quality > Auto Heated Seats.
See Driving and Operating in your Owner Manual.
♦ Optional equipment
DRIVER ASSISTANCE SYSTEMS ♦