display CADILLAC ESCALADE 2019 Convenience & Personalization Guide
[x] Cancel search | Manufacturer: CADILLAC, Model Year: 2019, Model line: ESCALADE, Model: CADILLAC ESCALADE 2019Pages: 20, PDF Size: 4.35 MB
Page 16 of 20

16
STABILITRAK®/TRACTION CONTROL
SYSTEMS
The Traction Control system limits
wheelspin and the StabiliTrak stability
control system assists with directional
control of the vehicle in difficult driv -
ing conditions. Both systems turn on
automatically every time the vehicle is
started.
Turn off Traction Control if the
vehicle is stuck and rocking the
vehicle is required.
Press the Traction Control/
StabiliTrak OFF button on the left side of the infotainment
screen to turn Traction Control off or back on. The
Traction
Control Off light will illuminate on the instrument
cluster when
the system is off.
See Driving and Operating in your Owner's Manual.
DRIVER MODE CONTROL SYSTEM
The \b 0 ' 4 # 0 - " # - , 2 0 - * 1 7 1 2 # + 3 2 - + 2 ' ! * * 7 " ( 3 1 2 1 1 2 # # 0 ' , % A 3 2 o -
matic transmission and Magnetic Ride Control settings in real time.
Press the Mode button on the left side of the infotainment
screen to view the menu on the Driver Information Center.
Press the
button again to select the Tour or Sport mode.
See Driving and Operating in your Owner's Manual.
AUTOMATIC TRANSMISSION
RANGE SELECTION MODE
Range Selection Mode allows the driver to select the range of gears
for the current driving conditions.
1. Move the shift lever to the L (Manual) position.
2. Press the + (plus) or – (minus) button (A) on the shift lever to
select a lower or higher gear. The current gear is displayed next
to the L on the Driver Information Center.
The transmission will be
limited to the gear selected
and lower gears. If vehicle
speed is too high or too low
for the requested gear, the
shift will not occur.
TOW/HAUL MODE
The Tow/ \f 3 * - " #
adjusts the transmission shifts to reduce shift cycling, such as
when towing or hauling heavy loads or driving on steep grades.
To turn the system on or off, press the Tow/ \f 3 * - " e
button (B) on the end of the shift lever.
See Driving and Operating in your Owner's Manual.
TIRE PRESSURE MONITOR
The
Low Tire Pressure warning light on the instrument cluster
illuminates when one or more of the vehicle’s tires is significantly
underinflated. Fill the tires to the proper tire pressures listed on
the Tire and Loading Information label, located below the driver’s
door latch. Current tire pressures can be viewed on the \b 0 ' 4 # 0
Information Center. The Tire Fill Alert provides visual and audible
alerts to help when inflating a tire to the recommended tire
pressure.
Refer to your Owner’s Manual for information about normal monthly tire
maintenance.
See Vehicle Care in your Owner's Manual.
A
B
Page 18 of 20

SET MEMORY POSITIONS
With the vehicle in Park and the
ignition On or in Accessory mode:
1. Adjust the power driver’s seat,
power adjustable pedals, power
outside mirrors, and power tilt/
telescopic steering column to the
desired positions.
2. Press and release the SET button.
A beep will sound. Immediately
press and hold
button 1 until two
beeps sound.
3. Repeat the steps using button 2 for a second driver.
To store driver\b 1 1 # 2 A " ( 3 1 2 * # . # " * 1 , " 1 2 # # 0 ' , % ! - * 3 + ,
positions for more clearance when exiting the vehicle, repeat steps
1 and 2 using the
EXIT button.
RECALL POSITIONS
Press and hold button 1 or 2 or the EXIT button until the
seat, pedals, mirrors and steering column reach the set position.
The memory/exit positions can be programmed to be recalled
automatically when the ignition is turned On/Off (for exit recall,
the driver\b 1 " - - 0 + 3 1 2 # - . # , # " K .
To set the Auto Memory Recall or Easy Exit Options, go to
Settings > Vehicle > Comfort and Convenience > Auto Memory
Recall or Easy Exit Options.
See Seats and Restraints in your Owner's Manual.
18
POWER FRONT SEATS
SEAT ADJUSTMENTS
A. Seat Cushion Adjustment
Move the front horizontal
control to move the seat for -
ward or rearward, or to tilt,
raise or lower the seat.
B. Seatback Adjustment
Move the vertical control to
recline or raise the seatback.
C. Lumbar Adjustment
Move the rear control fore/aft to increase/decrease lumbar
support or up/down to raise/lower the lumbar location.
ADDITIONAL SEAT ADJUSTMENTS (PLATINUM MODEL)
D. Feature Select Control
Press and release the control
to display the seat adjustment
features on the infotainment
screen. Press and hold to scroll
through the adjustments.
E. 4-Way Control Pad
Use the 4-way control pad to
make adjustments up, down,
forward, or rearward to the
selected feature.
F. Massage On/Off
With the ignition on, press to recall the last massage type and
intensity.
A
F D
C B
E