lock CADILLAC SRX 2007 1.G Owner's Manual

This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
1. This device may not cause interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation of the device.
Changes or modications to this system by other
than an authorized service facility could void
authorization to use this equipment.At times you may notice a decrease in operating
range. This is normal for any RKE system. If
the transmitter does not work or if you have to
stand closer to your vehicle for the transmitter to
work, try this:
Check the distance. You may be too far from
your vehicle. You may need to stand closer
during rainy or snowy weather.
Check the location. Other vehicles or objects
may be blocking the signal. Take a few steps
to the left or right, hold the transmitter
higher, and try again.
Check to determine if battery replacement is
necessary. See “Battery Replacement”
underRemote Keyless Entry (RKE) System
Operation on page 96.
If you are still having trouble, see your dealer
or a qualied technician for service.
95

Remote Keyless Entry (RKE)
System Operation
With this feature, you can lock and unlock the
doors and liftgate, open and close the liftgate, and
turn on your vehicle’s interior lamps from up to
65 feet (20 m) away using the Remote Keyless
Entry (RKE) transmitter supplied with your vehicle.
You will have one of the RKE transmitters
below.
Q(Lock):Press this symbol on the RKE
transmitter to lock the doors. This also arms the
theft-deterrent system. SeeTheft-Deterrent
System on page 112for additional information.
You can program your vehicle so that the exterior
lamps will ash and/or the horn will sound
when you lock the doors with the RKE transmitter.
SeeDIC Vehicle Customization on page 231for
more information on programming this feature.
"(Unlock):Press this symbol on the RKE
transmitter to unlock the driver’s door. This also
disarms the theft-deterrent system. Press the
button again, within ve seconds, to unlock the rest
of the doors.
You can program your vehicle so that the exterior
lamps will ash when you unlock the doors
with the RKE transmitter. SeeDIC Vehicle
Customization on page 231for more information
on programming this feature.
If your vehicle is programmed for remote
conrmation, the doors must be closed for this
feature to work. If a door is open, remote
conrmation will be canceled.
96

L(Panic Alarm):Press and release this button
to locate your vehicle. The turn signal lamps
will ash and the horn will sound three times.
Press and hold this button for more than
two seconds to activate the panic alarm. The
turn signal lamps will ash and the horn will sound
repeatedly for 30 seconds. The alarm will turn
off when the ignition is turned to ON or the alarm
button is pressed again. The ignition must be
in OFF for the panic alarm to work.
&(Power Liftgate):Press and hold this button
on the RKE transmitter to open and close the
liftgate. The taillamps will ash and a chime will
sound to indicate when the liftgate is opening and
closing.
Matching Transmitter(s) to Your
Vehicle
Each RKE transmitter is coded to prevent another
transmitter from unlocking your vehicle. If a
transmitter is lost or stolen, a replacement can be
purchased through your dealer. Remember to
bring any additional transmitters with you so that
all of them can be re-coded to match the new
transmitter. Once your dealer has coded the new
transmitter, the lost transmitter will not unlock
your vehicle. Each vehicle can have a maximum
of eight transmitters matched to it.
Battery Replacement
Under normal use, the battery in your RKE
transmitter should last about four years.
The battery is weak if the transmitter will not work
at the normal range in any location. If you have
to get close to your vehicle before the transmitter
works, it is probably time to change the battery.
Notice:When replacing the battery, use
care not to touch any of the circuitry. Static
from your body transferred to these surfaces
may damage the transmitter.
97

Doors and Locks
Door Locks
{CAUTION:
Unlocked doors can be dangerous.
Passengers, especially children, can
easily open the doors and fall out of a
moving vehicle. When a door is
locked, the handle will not open it.
You increase the chance of being
thrown out of the vehicle in a crash if
the doors are not locked. So, wear
safety belts properly and lock the
doors whenever you drive.
CAUTION: (Continued)
CAUTION: (Continued)

Young children who get into unlocked
vehicles may be unable to get out. A
child can be overcome by extreme
heat and can suffer permanent injuries
or even death from heat stroke.
Always lock your vehicle whenever
you leave it.
Outsiders can easily enter through an
unlocked door when you slow down
or stop your vehicle. Locking your
doors can help prevent this from
happening.
100

There are several ways to lock and unlock your
vehicle.
Because your vehicle has the theft-deterrent
system, you must unlock the doors from the
outside with the key or Remote Keyless Entry
(RKE) transmitter to avoid setting off the alarm.
If the windows are down and the doors are locked,
do not reach in to manually unlock the vehicle
because you will set off the alarm.
From the inside, use
the manual lock levers
located on the door
panels near the
windows.
Push down on the manual lock lever to lock the
door. To unlock the door, pull up on the lever.Central Door Unlocking System
Your vehicle has a central door unlocking feature.
When unlocking the driver’s door, you can
unlock the other doors by holding the key in the
turned position for a few seconds or by quickly
turning the key twice in the lock cylinder.
Power Door Locks
The power door lock switches are located on the
armrest on the front doors.
K(Unlock):Press the side of the switch with the
unlock symbol to unlock the doors.
Q(Lock):Press the side of the switch with the
lock symbol to lock the doors.
101

Delayed Locking
With this feature, you can delay the actual locking
of the doors.
When the power door lock switch or the lock
button on the remote keyless entry transmitter is
pressed when the key is not in the ignition and the
driver’s door is opened, a chime will sound
three times indicating that delayed locking is
active.
When all the doors are closed, the doors will lock
automatically after ve seconds. If a door is
reopened before ve seconds have elapsed, the
ve second timer will reset itself once all the doors
are closed again.
You can press the door lock switch or the lock
button on the remote keyless entry transmitter
again to override this feature and lock the doors
immediately.
You can turn this feature off using the Driver
Information Center (DIC). When delayed locking is
off, the doors will lock immediately when you
press the power door lock switch or the lock button
on the remote keyless entry transmitter. See
DIC Vehicle Customization on page 231for more
information.
Programmable Automatic
Door Locks
Your vehicle is programmed so that when the
doors are closed, the ignition is on and the shift
lever is moved out of PARK (P), all the doors
will lock. The front door inside handles will remain
active. The doors will unlock every time you
stop the vehicle and move the shift lever back into
PARK (P).
If someone needs to exit the vehicle once the doors
are locked, have that person use the manual lever
or power door lock switch for the rear doors. The
front doors will remain unlocked from inside the
vehicle. When the door is closed again, it will not
lock automatically. Use the manual lever or the
power door lock switch to lock the door.
The power door locks can be programmed
through prompts displayed on the Driver
Information Center (DIC). These prompts allow
you to choose various lock and unlock settings.
For more information on programming, see
DIC Vehicle Customization on page 231.
102

Rear Door Security Locks
Your vehicle has rear door security locks that
prevent passengers from opening the rear doors
on your vehicle from the inside.
The rear door security
locks are located on
the inside edge of each
rear door. You must
open the rear doors to
access them.
To use these locks, do the following:
1. Insert your key into the slot next to the rear
door security lock label and turn it to engage
the lock.
2. Close the door.
3. Repeat the steps for the other rear door.The rear doors on your vehicle cannot be opened
from the inside when this feature is in use.
When you want to open a rear door when the
security lock is on, do the following:
1. Unlock the door using the Remote Keyless
Entry (RKE) transmitter, the front door power
lock switch or by lifting the rear door
manual lock.
2. Then open the door from the outside.
To cancel the rear door security lock, do the
following:
1. Unlock the door and open it from the outside.
2. Insert your key into the slot next to the
rear door security lock label and turn it
to disengage the lock.
3. Repeat the steps for the other lock.
The rear door locks will now work normally.
103

Lockout Protection
If you press the power door lock switch when the
key is in the ignition and any door is open, all
the doors will lock and only the driver’s door will
unlock. If you close the doors, you can lock
them using the remote keyless entry transmitter.
Be sure to remove the key from the ignition
when locking your vehicle.
This feature can be overridden by pressing the lock
button on the remote keyless entry transmitter or by
pressing the power lock switch a second time.
Power Liftgate
Power Liftgate Operation
Your vehicle has a power liftgate. The vehicle
must be in PARK (P) to power open or close the
liftgate.
The liftgate must be completely closed to power
open or the liftgate must be completely open
to power close.
The taillamps will ash and a chime will sound at
the beginning of each power operation cycle.
{CAUTION:
You or others could be injured if caught in
the path of the power liftgate. Make sure
there is no one in the way of the liftgate
as it is opening and closing.
104

Manual Liftgate Operation
With the doors unlocked, the power liftgate can
always be manually opened and closed.
To open the liftgate, pull up on the handle on the
outside of the liftgate. To close the liftgate,
use the pull cup to lower the liftgate and close.
The liftgate latch will power cinch to closed
position. Do not force the liftgate during a
power cycle.
Always close the liftgate before driving.{CAUTION:
It can be dangerous to drive with the
liftgate open because carbon monoxide
(CO) gas can come into your vehicle. You
can not see or smell CO. It can cause
unconsciousness and even death. If you
must drive with the liftgate open or if
electrical wiring or other cable
connections must pass through the seal
between the body and the liftgate:
Make sure all other windows are shut.
Turn the fan on your heating or
cooling system to its highest speed
and select the control setting that will
force outside air into your vehicle. See
Dual Climate Control System on
page 189.
If you have air outlets on or under the
instrument panel, open them all the
way. SeeEngine Exhaust on page 132.
107

Power Windows
{CAUTION:
Leaving children, helpless adults, or pets
in a vehicle with the windows closed is
dangerous. They can be overcome from
extreme heat in warm or hot weather and
suffer permanent injuries or even death
from heat stroke.
Leaving children in a vehicle with the
ignition key is dangerous for many
reasons, children or others could be badly
injured or even killed. They could operate
the power windows or other controls or
even make the vehicle move. The
windows will function with the keys in the
ignition and they could be seriously
injured or killed if caught in the path of a
closing window. Do not leave keys in a
vehicle with children.
When there are children in the rear seat
use the window lockout button to prevent
unintentional operation of the windows.The power window
switches are located on
the armrest near
each window.
Press the switch to the rst position to lower the
window to the desired level. Pull the switch
up to raise the window.
Your vehicle has Retained Accessory Power (RAP)
that allows you to use the power windows once the
ignition has been turned off. For more information,
seeRetained Accessory Power (RAP) on
page 118.
109