belt CHEVROLET BLAZER 1997 2.G Owner's Guide

Downloaded from www.Manualslib.com manuals search engine I
5. Pull the rest of the shoulder belt all the way out of
the retractor to set the lock.
6. To tighten the belt, feed the shoulder belt back into the
retractor while you push down on the chld restraint.
7. Push and pull the child restraint in different
directions to be sure
it is secure.
To remove the child restraint. just unbuckle the vehicle's
safety belt and let
it go back all the way. The safety belt
wilI move freely again and be ready to work for an adult
or larger child passenger.
1-40

Downloaded from www.Manualslib.com manuals search engine Center Seat Positions (4-Door Models)
Don’t use child restraints in these positions. The
restraints won’t work properly.
Securing a Child Restraint in the Right
Front Seat Position
You’ll be using the lap-shoulder belt. See the earlier part
about the top strap if the child restraint has
one.
1.
2.
3.
Put the restraint on the seat. Follow the instructions
for
the child restraint.
Secure
the child in the child restraint as the
instructions say.
Pick up
the latch plate, and run the lap and shoulder
portions of
the vehicle’s safety belt through or
around
the restraint. The child restraint instructions
will show you how.
If the shoulder belt goes in front
of the child’s face or
neck, put it behind the child restraint.
1-41

Downloaded from www.Manualslib.com manuals search engine .."
4. Buckle the belt. Make sure the release button is
positioned so you would be able to unbuckle the
safety belt quickly
if you ever had to.
I
r
5. Pull the rest of the shoulder belt all the way out of
the retractor to set the lock.
1-42

Downloaded from www.Manualslib.com manuals search engine I
6. To tighten the belt, feed the shoulder belt back into the
retractor while
you push down on the child restraint.
7. Push and pull the child restraint in different
directions to be sure
it is secure. If you’re using a
bucket seat, adjust the seat forward until the lap
portion of the safety belt holds the restraint firmly.
But don’t move
it any more than needed to tighten
the
lap belt.
To remove the child restraint, just unbuckle the vehicle’s
safety belt and let
it go back all the way. The safety belt
will move freely again and be ready
to work for an adult
or larger child passenger.

Downloaded from www.Manualslib.com manuals search engine Larger Children
Children who have outgrown child restraints should
wear the vehicle's safety belts.
If you have the choice, a child should sit next to a
window so the child can wear a lap-shoulder belt and
b oet the additional restraint a shoulder belt can provide.
Accident statistics
show that children are safer if they
are restrained
in the rear seat. But they need to use the
safety belts properly.
Children who aren't buckled up can be thrown out in
a crash.
Children who aren I ouckled up can strike other
people who are.
1-44

Downloaded from www.Manualslib.com manuals search engine -
/d CAUTION:
Never do this.
Here two children are wearing the same belt. The
belt can’t properly spread the impact forces. In
a
crash, the two children can be crushed together
and seriously injured.
A belt must be used by
only one person at
a time.
Q: What if a child is wearing a lap-shoulder belt,
but the child
is so small that the shoulder belt is
very close to the child’s face or neck?
A: Move the child toward the center of the vehicle, but
be sure that the shoulder belt still is on the child’s
shoulder,
so that in a crash the child’s upper body
would have the restraint that belts provide. If the
child is sitting
in a rear outside position of a
four-door model, see “Rear Safety Belt Comfort
Guides” in the Index. If the child is so small that
the shoulder belt is still very close to
the child’s
face or neck.
you might want to place the child in a
seat that has a lap belt, if your vehicle has one.
1-45

Downloaded from www.Manualslib.com manuals search engine A CAUTION:
Never do this.
Here a child
is sitting in a seat that has a
lap-shoulder belt, but the shoulder part is behind
the child.
If the child wears the belt in this way, in
a crash the child might slide under the belt. The
belt’s force would then be applied right
on the
child’s abdomen. That could cause serious or
fatal in,juries.
Wherever the child sits, the lap portion of the belt
should
be worn low and snug on the hips. just touching
the
child‘s thighs. This applies belt force to the child’s
pelvic bones
in a crash.
1 -46

Downloaded from www.Manualslib.com manuals search engine Safety Belt Extender
If the vehicle’s safety belt will fasten around you, you
should
use it.
But if a safety belt isn’t long enough to fasten, your
dealer will order you an extender. It’s free. When
you go
in
to order it, take the heaviest coat you will wear, so the
extender will be long enough for you. The extender will
be just for
you, and just for the seat in your vehicle that
you choose. Don’t let someone else use it. and use it
only for
the seat it is made to fit. To wear it, just attach it
to the regular safety belt.
Checking Your Restraint Systems
Now and then, make sure the safety belt reminder Iight
and all your belts, buckles, latch plates, retractors and
anchorages are working properly.
Look for any other
loose or damaged safety belt system parts.
If you see
anything that might keep a safety belt system from
doing
its job, have it repaired.
Torn
or frayed safety belts may not protect you in a
crash. They can rip apart under impact forces. If a belt
is
torn or frayed, get a new one right away.
Also look for any opened or broken air bag covers, and
have them repaired or replaced. (The air bag system
does not need regular maintenance.)
1-47

Downloaded from www.Manualslib.com manuals search engine Replacing Restraint System Parts
After
a Crash
If you've had a crash, do you need new belts'?
After
a very minor collision, nothing may be necessary.
But if the belts were stretched, as they would be if worn
during
a more severe crash. then you need new belts.
CAUTION ATTENTION 1
must be replaced.
If you ever see a label on the driver's safety belt buckle
that says
to replace the buckle assembly. be sure to do
so. Then the new buckle assembly will be there to help
protect
you in a collision.
If belts are cut or darnagea, replace them. Collision
damage also may mean
you will need to have safety belt
or seat parts repaired or replaced. New parts and repairs
may be necessary even
if the belt wasn't being used at
the time
of the collision.
If an air bag inflates, you'll need to replace air bag
system parts. See the part on the air bag system earlier in
this section.
1-48

Downloaded from www.Manualslib.com manuals search engine Door Locks
A CAUTION:
Unlocked doors can be dangerous.
Passengers
-- especially children -- can easily
open the doors and
fall out. When a door is
locked, the inside handle won't open it.
Outsiders can easily enter through an unlocked
door when you slow down
or stop your vehicle.
This may not be so obvious: You increase the
chance of being thrown out of the vehicle
in a
crash if the doors aren't locked. Wear safety belts
properly, lock your doors, and you will be far
better off whenever you drive your vehicle.
I
There are several ways to lock and unlock your vehicle.
You can use the Keyless Entry System,
if you have
this option. You
can use your key to unlock your door from
the outside.
To lock your door from the inside, slide the lever on
your inside door rearward.
To unlock the door, slide the
lever on your inside door
forward. You
will see a red
area
on the lever.
2-4