display CHEVROLET CAPTIVA SPORT 2014 Infotainment System Guide

Black plate (63,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
Infotainment System 63
Voice Recognition
Voice recognition allows for
hands-free operation within the
audio and phone applications. This
feature can be started by pressing
either the
J/0button on the
steering wheel or the voice
recognition icon on the touch screen
display.
However, not all features within
these areas are supported by voice
commands. Generally, only complex
tasks that require multiple manual
interactions to complete are
supported by voice commands.
For example, tasks that take more
than one or two button presses such
as selecting a song or artist to play
from a media device would be
supported by voice commands.
Other tasks, like adjusting the
volume or seeking up or down are
audio features that are easily
performed by pressing one or two
buttons, and are not supported by
voice commands. Most voice commands, except for
voice keypad, can be completed in
a single command. If the task takes
more than one command to
complete, the first command would
be to indicate the kind of task that is
to be performed. The system will
reply, prompting dialog to help
speak the necessary information.
Voice recognition can be used when
the ignition is on or when Retained
Accessory Power (RAP) is active.
See
“Retained Accessory Power
(RAP)” in the owner manual.
Using Voice Recognition
Voice recognition becomes available
once the system has been
initialized. Initialization takes place
when the ignition is turned on. This
may take a few moments.
1. Press
J/0on the steering
wheel control to activate voice
recognition, or press the voice recognition icon on the
infotainment touch screen on the
radio.
.If voice recognition is
started, the lists and
controls are verbal and the
visual displays through the
radio. The commands may
then be touched or spoken.
2. The audio system mutes and the system plays a prompt followed
by a beep.
3. Wait until after the beep completes, then clearly speak
one of the commands described
in this section.
Press
J/0to interrupt any
voice recognition. This will
terminate the prompt. The beep
is heard immediately, and a
command can be stated without
having to wait.

Black plate (64,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
64 Infotainment System
There are two voice prompt modes
supported:
.Long verbal prompts: The longer
prompts provide more
information regarding the
supported actions for that voice
recognition session.
.Short prompts: The short
prompts provide simple setup
and action commands.
The voice prompt modes can be
changed in the Voice Recognition
Menu from the Settings icon on the
Home Page.
If a command is not heard during a
short period of time, the voice
recognition process times out. Prompts and Screen Displays
The system prompts and display
screens will adjust to reflect the
commands during the voice
recognition session.
While voice recognition is active,
there may be corresponding buttons
and screen displays available to
interact with the system so that
some of the functions can be
manually done. Pressing any of the
buttons or displays to finish a
function that was initiated through
voice recognition will terminate the
session. If the manual functions are
only partially completed, the voice
recognition will proceed until
finished.
Canceling Voice Recognition
.PressKon the steering wheel
controls. This will terminate the
voice recognition session and
display the screen prior to when
voice recognition was initiated.
.Press thezor the circled arrow
displaying on the upper corners
of the screen to terminate or go
back up the voice menu,
respectively, during the voice
recognition session.
.Say “Cancel” or“Exit” to
terminate or go back to the voice
menu during the voice
recognition session, and to
display the screen prior to when
voice recognition was initiated.
Helpful Hints for Speaking
Commands
The voice recognition application
can usually understand direct
commands of the application
and task.

Black plate (65,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
Infotainment System 65
An example of a direct command
would be,“Phone.”The system may
answer with a prompt of, “Say Call
followed by the number or contact
name.” The direct command for this
task would be, “Call 555-1212.”
If the phone number has been
saved as a name or place, the direct
command would be, “Call David’s
office number.”
Directed Dialog
A directed dialog is an interaction
between a person speaking the
command and the system prompting
for specific information necessary to
complete the task. Many times the
system may repeat what the person
has stated as a command. This is
done as a confirmation to make
sure the command is understood.
Voice Recognition for the
Radio
All audio screens have a voice
recognition button to launch an
audio voice recognition session.
If browsing the radio when the voice button is pressed, the voice
recognition screens for radio
display.
The following list shows radio
features that are controllable by
voice recognition commands.
A voice recognition command would
have to include all necessary
instructions for the system to carry
out each command:
help:
Voice control help for radio
functionality.
tune FM: Most recently tuned FM
station.
tune AM: Most recently tuned AM
station.
tune XM: Most recently tuned
SiriusXM channel.
tune FM HD
: Listen to an HD FM
radio frequency.
tune AM HD
: Listen to an HD AM
radio frequency. tune XM :
Listen to an
SiriusXM channel (by number).
tune XM : Listen
to an SiriusXM channel (by name).
Pandora Commands
For each voice recognition
command, tap the
b/gbutton on
the steering wheel or on the screen
to direct the stated commands. An
example of a simple direct
command is, “Play Pandora.”
[please / I want [you] to / I would
like to / I wanna / I’d like to] (tune
[to] / play / goto / change to)
([station] / [favorite])
: Instructs the
system to call the Pandora
application up on the paired,
connected phone device. Playback
begins where it left off, unless the
station called is instructed
differently.
bookmark song: Instructs the
system to save the selected song
for later recall.

Black plate (67,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
Infotainment System 67
[no] [select / [it’s] selection]
[number] two / [[no] select]
: Instructs the
system to select the number two
line on a menu.
[no] [select / [it’ s] selection]
[number] three / [[no] select]
: Instructs the
system to select the number three
line on a menu.
[no] [select / [it’ s] selection]
[number] four / [[no] select]
: Instructs the
system to select the number four
line on a menu.
no / incorrect / wrong / negative /
none are correct / none of these /
not really / no I said / did not /
nope / na / no way: Instructs the
system to select the system to reject
the result and switch the screen.
Voice Recognition for My
Media
All audio screens have a voice
recognition button to launch an
audio voice recognition session. If browsing My Media when the
voice button is pressed, the voice
recognition screens for My Media
display.
The following list shows My Media
features that are controllable by
voice recognition commands.
A voice recognition command would
have to include all necessary
instructions for the system to carry
out each command:
help:
Voice control help for My
Media functionality.
play : Play a
specific device including disc, AUX,
Bluetooth USB, and iPod.
play genre: Play music from a
specific genre.
play artist: Play music by a
specific artist.
play album: Play music from the
specific album.
play song: Play track including CD
and DVD. play playlist:
Play music in a
pre-defined playlist.
play audio book: Play an audio
book by Title.
play podcast: Listen to a Podcast.
Voice Recognition for Phone
((call / dial) [number] / phone)
: Initiate a call to
a standard phone number.
((call / dial) [phone] / contact)
: Initiate a call to
an entered contact.
The voice command must match
how the contact is stored in the
phone device. For example, “call
, .”
(call / dial) [at]
home / ’s (home [phone / number]
/ house): Initiate a call to an
entered contact and location at
home, at work, on mobile device,
or on another phone.

Black plate (68,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
68 Infotainment System
((pair [my / this] / add) [[a] new] /
connect [new]) phone:Begin the
Bluetooth pairing process. Follow
instructions on the radio display.
((switch / change) [phone] to / use
/ select / connect)
: Select a
different phone for outgoing calls.
(switch / to [my] other) / change)
phone: Select to another owned
phone.
redial [the] last (number / contact
/ number): Initiate a call to the last
dialed number.
(call / dial) [a] contact [open]
(address / phone) book: Go to a
sub-menu location for contact
information.
[goto / start / use] [voice] keypad /
international call: Go to a
sub-menu location for international
contact information.General Commands
cancel: Instructs the system to
cancel the command.
cancel / stop / end / cancel
request: Instructs the system to
end the speech session.
[no] go back / back / previous
screen: Instructs the system to go
back to the Previous Menu /
Selection.
yes / correct / that is correct /
yeah / ya / yep / yup / sure / right /
OK / positive / you got it /
probably / you bet: Any of these
commands will be accepted by the
system as an answer of yes.
[no] [select / [it’ s] selection]
[number] one / [[no] select]
: Instructs the
system to select the number one
line on a menu.
[no] [select / [it’ s] selection]
[number] two / [[no] select]
: Instructs the
system to select the number two
line on a menu. [no] [select / [it’
s] selection]
[number] three / [[no] select]
: Instructs the
system to select the number three
line on a menu.
[no] [select / [it’ s] selection]
[number] four / [[no] select]
: Instructs the
system to select the number four
line on a menu.
no / incorrect / wrong / negative /
none are correct / none of these /
not really / no I said / did not /
nope / na / no way: Instructs the
system to select the system to reject
the result and switch the screen.
Voice Recognition for
Navigation
If the voice button is pressed while
on a map screen, the system begins
a voice recognition session.

Black plate (69,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
Infotainment System 69
Destination and Guidance
Commands
destination (Available for English,
Spanish, and French
languages):Instructs the system
that the user wants to enter a
destination using voice recognition.
After this command is stated, the
system displays a menu for entering
the destination by address or
contacts stored in the address book.
If address is selected, the system
prompts for more information such
as country, city, state, or house
number. If entering the destination
by contacts, the system will prompt
for a contact name as stored.
Set the Destination by using voice
recognition:
1. Press the
b/gsteering wheel
control button or the voice
recognition icon on the
touchscreen display. The audio
system mutes, and a beep is
heard. 2. Say the command
“Destination
Address.” The system replies
with “say Cancel Guidance
Route or say Destination” if
there is a route entered already.
Otherwise the system will reply
with “say the City and State or
say Change Country.” If the
country is incorrect, go to
Step 5. Otherwise, say the city
and state for the destination.
During the session, the city and
state matches to the spoken city
and state name. The system
asks the user to select an item
from the candidate list either by
pressing the desired choice,
or by saying the list number of
the desired choice.
3. There will be another prompt asking about address or contact.
The system replies “Say the
House Number and Street
Name.” Say the house number
and street name for the
destination. The house and
street address as well as the closest match to the spoken
number are similar to the city
and state commands.
4. This address is now set as the destination. Select the Start
Guidance screen button to begin
destination route guidance. At
that point there are additional
options to review the destination
location on the map, or to
preview the route, detailed later
in this manual.
5. After saying “Change Country,”
the system replies with “Say the
Name of the Country or Territory
for the address wanted.” Say the
correct country or territory. The
system will return to the
Destination Address menu and
ask, “Say the City and State/
Province or Say Change
Country” as in Step 2.

Black plate (72,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
72 Infotainment System
If you know the command you
would like to execute, say the
command. If the command is not
known, say“Help”while in any voice
recognition menu.
See Voice Recognition on page 63.
Noise: The system may not
recognize voice commands if there
is too much background noise.
When to Speak: A tone sounds to
indicate that the system is ready for
a voice command. Wait for the tone
and then speak.
How to Speak: Speak clearly in a
calm and natural voice.
Audio System
When using the Bluetooth system,
sound comes through the vehicle's
front audio system speakers and
overrides the audio system. Use the
volume bar during a call to change
the volume level. The adjusted
volume level remains in memory for
later calls. The system maintains a
minimum volume level.
Other Information
The Bluetooth®word mark and
logos are owned by the Bluetooth®
SIG, Inc. and any use of such marks
by General Motors is under license.
Other trademarks and trade names
are those of their respective owners.
Pairing a Phone Using the
Infotainment System
Pairing a New Bluetooth Device
1. Press the Settings screen button on the Home Page to access the
Settings menu. Press Bluetooth
Device List from the Settings
menu to display the devices that
have been connected previously.
From this screen, either delete
or add more devices.
2. Press the New Device screenbutton to start the process of
adding a new Bluetooth device
to the radio system.
3. Once New Device is pressed, the radio becomes discoverable
for three minutes.

Black plate (73,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
Infotainment System 73
4. When a device is discovered,the screen changes to the
pairing screen. If the Bluetooth
device does not connect to the
radio within 60 seconds, the
screen times out, returns to the
Bluetooth Device List, and
cancels the discoverable
process.
5. During the start of the pairing process, a pop-up screen will
display on the Bluetooth device
asking to select .
If a PIN is to be entered, use
XXXX. Enter the PIN into the
Bluetooth device.6. Once the radio is selected fromthe Bluetooth device, the same
PIN must be entered to continue
the pairing process. Press the
Change PIN screen button to
enter a matching PIN. The
keypad screen displays to
complete this function.
7. An automatic six-digit PIN may appear on newer phones. Look
for the same number to match
on both the radio and device
being paired. Select YES on
both the radio and device to
complete the pairing process.
8. A pop-up displays to confirm thepairing was successful. 9. After initial pairing, a pop-up on
the device may appear to accept
and allow the radio permission
to download the phone device
phone/address book for later use
and to access text messaging.
Press Always Accept, if offered
on the device, for normal use.
No other paired device can see
this information on the other
device. This information is also
not accessible if the device from
which this information originated
is not currently paired, in range,
and connected.
10. For Blackberry devices, turn off the Automatic Echo control
from within the Device menu in
the phone. Leaving this feature
on can cause noise problems
during hands-free calls.
For information about how to
navigate the menu system using the
infotainment controls, see Overview
on page 4.

Black plate (74,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
74 Infotainment System
Pairing
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls can
be made using OnStar Hands-Free
Calling, if available. See“OnStar”in
the owner manual.
Pairing Information
.Up to 10 cell phones can be
paired to the Bluetooth system.
Up to a total of 10,000 phone
contacts and numbers can be
stored across 10 paired phones.
.The system will attempt to
connect to the last known
connected device if multiple
paired devices are in range of
the system.
.The pairing process is disabled
when the vehicle is moving.
.Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
.Only one paired cell phone can
be connected to the Bluetooth
system at a time.
.If multiple paired cell phones are
within range of the system, the
system connects to the first
available paired cell phone in the
order that they were last
connected. The radio will
attempt to connect to the last
connected device to the system.
To link to a different paired
phone, see “Connecting to a
Different Phone” later in this
section.
Pairing a Phone
Pairing is not allowed while the
vehicle is in motion.
1. Select Settings from the Home Page, or say, “Pair Phone”after
starting a voice recognition
session. 2. Select Bluetooth Device List.
3. Select New Device (Phone).
A four or six-digit Personal
Identification Number (PIN)
appears on the display.
4. Start the pairing process on the cell phone to be paired to the
vehicle. See the cell phone
manufacturer's user guide for
information on this process.
5. Locate the vehicle named in the list on the cell phone. Follow the
instructions on the cell phone to
enter and confirm the PIN
provided in Step 3. After the PIN
is entered, the system prompts
you to indicate pairing is
successful. The name of the
paired device depends on the
device and how it is set up. The
radio will automatically use the
vehicle name. The system
responds with “
has been successfully paired”
after the pairing process is
complete.

Black plate (75,1)Chevrolet Captiva Sport Infotainment System (GMNA-Localizing-US/Canada-
6225549) - 2014 - 2nd crc - 9/16/13
Infotainment System 75
6. If Yes is selected in Step 5, amessage will pop up on the
radio screen saying, “Pairing
successful with .
The connections may need to be
accepted to have access to your
Contacts and Text Messages.”
7. If No is pressed in Step 5, a message will pop up on the
radio screen saying that the
pairing was unsuccessful.
8. Repeat Steps 1–5 to pair additional phones.
While the phone is connected, the
Bluetooth icon on the upper right
corner of the radio will be
highlighted and the signal strength
and battery life of the phone will be
displayed.
Note: The current connected phone
would have a checkmark in the box
to the left of the device.
Listing All Paired and Connected
Phones
1. Select Settings from the Home Page. 2. Select Bluetooth Device List.
Deleting a Paired Phone
1. Select Settings from the
Home Page.
2. Select Bluetooth Device List.
3. Press the Delete button next to the listed device and follow the
on-screen prompts.
It is recommended the radio should
also be deleted from the Bluetooth
Device List.
Connecting to a Different Phone
To link to a different phone, the new
phone must be in the vehicle and
available to be connected to the
Bluetooth system before the
process is started.
1. Select Settings from the Home Page.
2. Select Bluetooth Device List. 3. Select the new phone to link to
and follow the on-screen
prompts.
If delete is selected, the
highlighted phone will be
deleted.
Making a Call Using the Phone
Book Contacts and Call List
For cell phones that support the
phone book feature, the Bluetooth
system can use the contacts stored
on your cell phone to make calls.
See your cell phone manufacturer ’s
user guide or contact your wireless
provider to find out if this feature is
supported by your phone. Also see,
“Pairing a New Bluetooth Device”
earlier in this section.
When using voice recognition to call
a contact, the voice command must
match how the contact is stored in
the phone.
When a cell phone supports the
phone book feature, the Contacts
and Call List menus are
automatically available. There may